INTERIOR AMBIENT LIGHTS RGB LED ON THE 2021 TOYOTA SIENNA XSE

Поділитися
Вставка
  • Опубліковано 13 жов 2024
  • I Install This LEDCARE interior ambient lights on our 2021 toyota sienna XSE to give a nice touch on the dashboard and floor mats area.
    here is the link for the kit www.amazon.com...
    it was $50 dollars but for me it was well spend
    LET ME KNOW YOUR OPINIONS ON THE COMMENTS BELOW
    THANKS FOR WATHCHING

КОМЕНТАРІ • 36

  • @JaiManny
    @JaiManny 8 місяців тому +1

    Wow... I just picked up my Sienna after 1 year and 4 month wait.... This looks amazing....gonna do the same. Thanks for doing this!

    • @MCCBodyShop
      @MCCBodyShop  8 місяців тому +1

      You welcome
      Thanks for watching 🙏

  • @khangngo16
    @khangngo16 3 роки тому +2

    Thanks for the quick disassembling run down on the trims. Now knowing where to tap the power source into (the below center arm console ambient plug) I'll be able to do the same as well.

    • @MCCBodyShop
      @MCCBodyShop  2 роки тому

      U welcome. That's the idea help u guys out

  • @sarahmoore8732
    @sarahmoore8732 3 роки тому +3

    OMG this interior LED is fiyah!!!! 🔥🔥 I just got the ‘21 Sienna in pearl white too and I’m LOVING all your mods so far. Bruh, where you located? I’m half tempted to drive mine to you and have you swag it out! 😆 I’m not super handy but your video makes me feel like I should give it a try...

    • @MCCBodyShop
      @MCCBodyShop  3 роки тому +1

      I'm located in DeLand Florida

    • @MCCBodyShop
      @MCCBodyShop  3 роки тому

      Thanks for the support 🙏
      I will love to help you out 👌

  • @BlackDiamondM109R300
    @BlackDiamondM109R300 3 роки тому +1

    Bro, I like what your doing with your Sienna. I’m planning i buy one soon. I love tue new 2021 sienna XSE. I believe yours is the only one Ives on utube that is getting fixed up. I’m like you bro, I can’t leave any of my cars stock. Lol great job soo far on what you have done with your sienna. 👍🏽😎

    • @MCCBodyShop
      @MCCBodyShop  3 роки тому

      Thanks man. That means a lot for me. I'm actually working on another video for exterior underglow led lights
      Make sure to subscribe to keep on top of the other mods I have in mind
      Thanks again for your support 🙏

    • @BlackDiamondM109R300
      @BlackDiamondM109R300 3 роки тому +1

      For sure bro. I liked and subscribed already and definitely looking forward to seeing your next mods. Thanks for sharing 👍🏽😎

  • @eduardomaldonado6750
    @eduardomaldonado6750 3 роки тому +2

    I suggest match the lights color to the orange of that stitch of the seats. Anyway It looks so cool 😎

    • @MCCBodyShop
      @MCCBodyShop  3 роки тому

      Yes I know. The lights actually where changing colors when I took the pics

    • @MCCBodyShop
      @MCCBodyShop  3 роки тому

      Thanks for ur suggestion

  • @markbranderhorst5802
    @markbranderhorst5802 2 роки тому +1

    Awesome video! I know your going for the stock look, did you think about tapping into a different power source vs using the cigarette adapter?

    • @MCCBodyShop
      @MCCBodyShop  2 роки тому +1

      I did the cigarette adapter because I dint want to tap it elsewhere but is up to your preferences
      Me personally don't use the cigarette hole for others connections so it works ok like that 👌

  • @orenkarasenty2078
    @orenkarasenty2078 Рік тому +1

    ❤❤❤❤❤❤❤❤❤❤❤❤❤

  • @RCInMotion
    @RCInMotion 3 роки тому +1

    🔥🔥🔥🔥🔥 Let’s goooooo !!!!! Party van !!!!

  • @evancamacho628
    @evancamacho628 3 роки тому +1

    Bro your an engineer!!

  • @sammyc1234
    @sammyc1234 2 роки тому +1

    Do more bro

  • @ericluu7806
    @ericluu7806 3 роки тому +1

    I just got the same light kit from u and notice the fiber optic isn't as bright the whole way. Do u have that issue?

    • @MCCBodyShop
      @MCCBodyShop  3 роки тому

      No I don't have that issue mine are pretty bright all the way

    • @ericluu7806
      @ericluu7806 3 роки тому +1

      Do u slide the big plastic into the trim first? Then snug the fiber optic in plastic holder?

    • @MCCBodyShop
      @MCCBodyShop  3 роки тому

      @@ericluu7806 I measured the plastic first and then took them out to snug the fiber optic. And them do the final installation

  • @danielramosrosario3624
    @danielramosrosario3624 2 роки тому +1

    Duro🔥🔥

  • @josemilan9637
    @josemilan9637 3 роки тому +1

    On fire 🔥

  • @814meizi5
    @814meizi5 2 роки тому +1

    hi bro my 2021 XLE tail light It's very ugly. How to change it into an xSe tail light?

    • @MCCBodyShop
      @MCCBodyShop  2 роки тому

      To be honest I haven't done one yet. So I don't have that info right away

    • @814meizi5
      @814meizi5 2 роки тому +1

      @@MCCBodyShop thank you

  • @tonyle7311
    @tonyle7311 3 роки тому +1

    Hi, i just wondering if we can change the overhead light by the slide and back doors opener? I just pick up my 21 Sienna limited and changed all the interior light but those 4 lights from overhead component, thanks

    • @MCCBodyShop
      @MCCBodyShop  3 роки тому

      No man. I just took mine off to find out for u. And the lights are built in on a board. U always can customize everything you want but u will need the knowledge to achieved it. If u have the knowledge or want to try it then in theory "yes" u can. But as a plug in bulb no its not going to work
      Hope I answered your question right ✅

    • @tonyle7311
      @tonyle7311 3 роки тому +1

      @@MCCBodyShop thanks bro, i just take out the overhead component and it is yellow circuit led board, which is suck, it is not like just swap out the light bulbs and put in the led bulbs like other lights in the car

    • @MCCBodyShop
      @MCCBodyShop  3 роки тому

      @@tonyle7311 yeah is bad design

  • @boylim6710
    @boylim6710 3 роки тому

    Sir,how to change bright light top console top roof

    • @khangngo16
      @khangngo16 3 роки тому

      You will have to disassemble the overhead console to expose the soldered SMDs to desolder them from the board then solder new ones in, just be careful not to burn the board.