Make SPY CAMERA from old phone | scientific ideas 2020
Вставка
- Опубліковано 15 кві 2020
- New SPY CAMERA • HOW TO Make SPY CAMERA...
RIDEN RD6018W: ban.ggood.vip/WRNL Discount code : BG67RD
RIDEN S-800-65V Switching Power Supply: bit.ly/3pg0z9b
RIDEN® FULL KIT RD6018: bit.ly/3a4wEKK
CASE: bit.ly/3sSQ0eG
SALE bit.ly/3ohzv8p
bit.ly/39fWlZP
MUSTOOL MT8206: ban.ggood.vip/WPBi
Wireless SPY camera • Make SPY CAMERA WIFI s...
Today I will turn an old camera from a broken phone into a spy camera. This camera has a resolution of 0.3 Mpx. Quite low because it was manufactured in 2010. However, it has USB interface.
If you like my video, give me a cup coffee. Thank you very much.
Donate : www.paypal.com/paypalme/phdhung
Facebook group : bit.ly/CreativeElectronic
Contact: Magnetron0989821611@gmail.com
Phone: 0989821611
#Inverter
#12Vto220V
#SPYcamera - Наука та технологія
Spy camera in a clock: ua-cam.com/video/Ve16SuyXtTs/v-deo.html
📷📷📷📸📸📷📷📷qwgy
Hyeu ia te eu eu se
Can I make the car interior camera like this, but the DVR has a camera input, so they have a bns socket input
Ahh, the incisor wire stripping technique (off-camera). PRICELESS!
True. They are selfish. And the sad matter is they are many in UA-cam
If I am not mistaken he used his teth as a stripper..:)
Stripping through mouth is a secret
i might need to learn this stripping technique for future to use on my future wife😏
17:30 - Quick tip. Tape the camera down with some Kapton tape. Tape the four wires down close to where they will go also with Kapton tape. Hold them in place with tweezers to aid soldering.
Why you need spy camera 🤨 caught in 4k
I like how you were slow to tap the screen in sync with the recording that was playing on the phone to make this look legit
Great work! I thought I was the only one who makes things like this..plus great soldering job, especially not using a super fine point soldering iron! Those camera wires are damn hard to see and work with sometimes..Keep up the awesome work! Just subscribed..
@??0
Amigo, no encontre su trabajo en su canal sobre cámaras o micro cámaras, me puede compartir el links por favor, se lo suplico, muchas gracias...
Owesome project 👍... What phone model and how did you find the usb pin???
Great for finding out if something you've misplaced has fallen behind a dresser or book shelf without having to move it to see what's back there.
Great video. I love how you are able to get close up. I just subscribed. Love your work.
muy muy bueno el video lo que me uvi9eragustado es que puedas explicar ..por partes sobre la camara saber mas
It's amazing that used cellphones can be used in the hands of creative people like you.👍🇮🇩👍
For those asking how he found the camera pin connection diagram:
Using multimeter before removing the camera from phone motherboard, then
1. GND is very easy to find, it is shorted to GND of the phone
2. V+ is the 5V input from phone (this might be the hardest to find if you don't have experience in tracing the input voltage). Find pin that has no connection with the GND (but there might be more than one). The OP found out using diode test but does not show which one to test. Another way to find out 5V rail is to find the Power IC or Mosfet that gives the 5V to whole motherboard and find the direct connection. While the data lines are typically not directly connected to power rail (it has connection but has pull-up resistor like 10k Ohm) but directly connected to one of motherboard SOC leg.
3. Then the rest of D+ and D- are found by trial and error (using permutation).
First, the testing is done by soldering & jumpering the pins of the camera (while camera still attached in phone board) directly to USB and then PC as seen in 8:09.
And NOTE that only some cameras support direct USB interface. So, this will work only on few phone models.
And if you guess the 5V line wrong, you might permanently damage the whole system.
What a fantastic video! Very well done! Up close viewing with the specifics. Written out what was needed to know. Very very well done!! Thank you for sharing this!
You know all the perverse uses that could be made using that thing, it's MAGNIFICENT!!!
:)
What was that thumbnail...🤫🤣🤣😂
Anyway good idea..
:))
lol
Great project ,I would like to ask you how did you find which wire you need.And the wires function
x2
He will not answer your questio cos he fund the GND and Volt also + DATA and _ DATA 4 wires that you asked about that!!!
And with only a voltmeter no one can find them!!!
Otherwise you must a perfect of this monile board!!!
I need this to look inside engines to see burnt ir bent valves to show my customers.
Perfect.
Must do this project.
Transporting old camera lens with an otg usb..
Wow..
Fantastic..
Just simple and neat - Great
8:35 hello bro why you selected it in diode range? What pinouts you targeting at this point
A very nice device that should be installed at home for protection
Absolutely amazing advice ♥️♥️♥️
You are doing great work 👍
Thanks bro
😂What a beautiful idea. No component no IC. Excluding the important things, a beautiful spy camera was made.😝 Thank you😅
Bro its work are not
Component built in lens camera just need power from batt phone
Hahahaha 😂
@@HariPrasad-ze7lw no
@@HariPrasad-ze7lw it doesn't work
Obrigado pelo conhecimento
انت حقا مبدع رغم طول مدة المقطع ولاكن كل دقيقه فيه مفيدة جدا ويستحق المشاهدة
وحقا انت تستحق الشكر والتقدير
What should be different about connection pins when connected to multimeter
Привет! Классно придумал👍 теперь нужно эту мини камеру подключить к wi-fi модулю.
ну ты поймей это не работает
You're amazing Brother, Nice Work No comment.
Thanks
Bro I'm new one here ❤️, awesome video , can you show more clearly how to find out the pins of the camera
let's wait for the answer,,,
🤗🤗🤗
I hope he answers
Awe, no answer yet? Gee that’s too bad, I heard a rumor he’s doing a lot of perpetual motion machines and free energy videos now, breaking the laws of thermodynamics is mere child play for someone so gifted….
His fingers look so dumb. I just can’t help it, I have an incredible urge to slam them in a rusted out car door over and over again…..
What a good carnal video, a question, how do you know which pins to use?
Read a few comments below, I have instructed.
Mobile Phone camera modules follow MIPI protocol mostly. I wonder how you have managed hook it directly to USB. Please post a brief about interface topology.
real??
Lol isn’t the cellphone doing that?
Oh snap!
I like such funny videos BUT don't you dare insert these "hand made devices" in your PC or phone.It can damage it
Absolutely amazing advice
Wire diagrams would help us.maub fte some kind of directions to where to soder them on the camera.
Did he reply to you u
i didn't find tbe schematic, how to identify the wires ?
good work👍
jajaja lol don't waste your time!
Nice project but how to identify the wires in golden paper board?
Hello my friend!. Do U know by the way, to make the same with an old blackberry camera? It's also good to know the pin values.
I will try and answer you
@@PhdHung Thanks a lot in advance!!!
I have a mic which is familiarly used with CCTV camera's.
I wanna use that mic as a external mic for videos.
4 wires are there... Shall i make it like this??? One side Micro USB & another side mic...
Do you prefer any app to record my audio if i made???
I will try and answer you.
I really liked,it thank you
سلمت يداك رحم الله الي يعلم بلا بخل ولا خفايا الله يبارك فيك
This is absolutely amazing advice
wow. good job bro 😍
Thanks bro
Excelente video y muy útil; gracias por el aporte .
Mas bro..mau nanya ..ni..bukan jcsat 4b udah off air skarang..atau pon ma c ada lgi..
Can you replace the usb with receiver for wireless transmitter with about 2km range?
great work bro love and support from Engineering Fun And Crafts
The finding pins is a mistery...
Hi Thank You For Your Beautiful And Special Videos And Channel ❤️❤️💐💐
Wow that's awesome idea, plzz can i hv more of the videos thanks,
How did you seperate or analyze the input (data in ) output (data out) pin connections ...it is not clear ....and why did not use the right color code during soldering?
Yes
But how do you know the difference between the positive electrode and the negative electrode?
Thank you for the idea
You don't and he isn't going to show you either 😂😂😂😂😂
Wow without any module? Or driver board?
Good! I think it may help to read part number from components especially to those who have sight problem like me .Tnx!!!
:D
Would be easier with a much smaller tip when soldering small components together
22:53 самые лучшие провода зачищенные своими зубами...🤣
Я всегда так делаю сам.
Super nice idea lods..thank you for sharing this video...👍😁
Thanks
Spy camera saya suka dgn karya Abang , sehingga menambah pengetahuan bagi saya pribadi dan masyarakat umumnya. Trima ksh ya ... Sdh membagi ilmunya
Jangan dicoba.
Oh vainglory haha, i love it, too
@@PhdHung and what your ign?
I playing in CN sever
Impressive eyesight and zoom from the cameraman.... As a fellow bot, I can relate to this
hopefully the next video will include the speaker and how to do it .. Thanks
Ok, wait me
@@PhdHung thank you so much
that was a cool vid to watch but not sure why you wrote down the numbers on the pad ? also i have a challenge for you the nerf nightfinder scope is very basic IR scope the leds can be swapped out for better ones but the screen inside the scope is bad and the zoom is a digital zoom on a tiny pixel screen any chance you could look to improve it some how would love that vid and then i could copy to improve my own lol
keep up the great work
Mini spy camera in awasome
My query
1) does the mini spy cam for recording also for hours
2) where can we get the surface paper as used in this project
ใช้ได้จริงๆ ใหมครับ แบบนี้
Price?
Amazing! I'm new subscriber.. you have a tutorial to find d+ and d- and positive?
My camera only has 6 pins. very easy. If your camera has more pins. It will be very difficult. In the next video, I will give more detailed instructions.
Very Nice. Have to try this to I have thousands of old phones
अच्छा प्रोजेक्ट बनाया सर साथसाथ सप्लायका + और - के साथ डायग्राम बताते तो मजा आ जाता।
I really like your pliers 😅 where did you bought it? 😂😂😂
:))
@@PhdHung answer his question ah
You're amazing bro..just great🔥🔥🔥
Thanks
what do you think would be the latest (potentially best) phone camera with usb-controller built in? because i guess modern phone cams won`t have that usb controller built in or do they? if they did everybody would do stuff like that instead of buying expensive webcams right? would be crazy to use some ludacris multi camera from a Huawei or IPhone as a usb webcam. Do you think there is any way of making that reality? like with an external usb controller? but what kind of protocol do these modern cameras speak? is it something like those 15pin RasPI cameras? Please contact me if you are Interestet in this Topic and share your knowledge, I`ll be researching that topic because i really want to do something similar like you did here but with an actually good Camera. Btw. love your videos, keep it up!
I was just browsing and found this video and your comment....I did not had any intention to make a usb camera but after reading ur comment now I am interested 😂
Hola en donde puedo conseguir este tipo de cámara y a que precio
Awesome!!!Great job!!
Great idea i can keep the flash? Better for look inside de wall dreain pipes.
flash works at 12V :(
as long as we didn’t know we had such masters
Irmão você consegue alguma mini câmera que filme ou tire fotos de textos em papéis A4 aquelas letras digitadas com precisão? Tem alguma dessa no mercado?
agradeço pelo conhecimento "congratulations"
Thanks
sim
@@maxxxb4uh4us80 opa bele? Tu sabe os pinos que ele usou ?
não irmão !!
Eu acho q não funciona isso não , vocês conseguiram?
muito bom parabéns vou fazer um microscopio
:))
I have no experience in electronics and I need to do the project with a Samsung G313F camera, but I did not know how to identify the signal from the pins to connect it; Could you help me?
Super bro .now I going to try with my old phone
Good luck
This is been something I have a problem with anyone who claims they can use any pins on the camera module to USB conversion. It just doesn't work that way. I guess he meant to show the camera module number at the beginning from there he took down the numbers 12, 4, 16 and 20 for this module but he doesn't show the part where he supposedly read that from some module white paper. In any camera the control module has a make and model.. you can search for information on the web.
You are right because its doesnt work
@@user-ux2nl3vv5s google is your friend. bt also an enemy of your time too lol
How to know the connection im confuse
Well done....nice work👌👍
Lila
Woow, i want to try it. Good job bro
Thanks
@@PhdHung does it really works
congrats :)) good work
Thanks
Over voltage and under voltage protection circuit please sir
ok, wait me
3 monts later...
5 months later..
9 months later...
And RIP
No first you have to break it apart remove vibration motor completely then speakers completely then find back lighting wires make mini switch to disable screen . This will keep you from getting cought.
Wonderful work😊👍👍👍
Why is there someone else working in background....??.... Cool..!!!
U r the hope as well as the inspiration of many hobbyists my mate... 👍.. ur ideas are lot surprising nd impressive... Thank u for sharing to us...
'The Man and the Technology'..🙃
No entiendo para que soldar el USB, puedes hacer un plano para las conexiones del flex de la camara gracias
Absolutely amazing
U didnt showed us which one is cameras power neagtive and positive and which were are data wires besides u took so much old key phone camera probably of some old 1.6 mega pixel camera and its output is like an hd cam?? U soldered all those camera wires randomly short circuting many wires with solder, and at they end u have used already sold in market otg cam, dnt fool us...
You know that watching fake video is the waste of time...
can you expland how to measure the + - data+ data- ? cause my camera is different with u
thanks before
Bro mere pass ek digital audio console hai 6 pin FireWire ki through computer mein ek card mein lagta hai...wo bhi 6 pin FireWire hai... Phaley console mixer computer mein software mein show hota tha...but ab nahi hota... Mujhey please guide ker dein FireWire ko Kasey check kru k Kiya problem hai.... Thanks
Can you remote transmit the video to another phone or is the video stored in that cellphone Micro SD Card?
Great diy hack props to you Sir
how to identify the wire terminals to make the cctv spy camera at home makes a video
Very easy
@@menatworkmw how
Which wires go where
how to find camera connection s well
Well, When the Camera unit was on the mother board (Before he sliced it off ), the VCC ( + ) and VDD (-) could logically be checked by simple continuity test with reference to corresponding on the mother board. Once it is identified with 100 % accuracy, DATA + and DATA - could be found by trial and error basis. This being a USB format, the assembly could be tested on a desktop or laptop PC. Once your PC detects correct settings, you are rest assured. BUT MAKE SURE THAT DC input to camera is correct. Or you will end up damaging the camera. But in most cases, I have found that, these sub systems like camera etc have built in DC polarity protection. But not necessarily. My observations are based on my experience working on a similar scenario, using a web cam extracted from a broken lenovo laptop screen. Will try to post a video on my channel with detailed explanation, in due course.
@@danjunk-DIY Atleast you have courtesy to guide the people. Gentleman.
@@wazirazam2591 thanks.
Love it's where to buy black cord USB??
Ur awesome yarr......ur so intelligent.....great man...🤘🤘🤘👍👍👍
How did you know and find which are the connections of the camera from the pcb?
Try and fault i make one useing pc camera
HEHE BOI... i have like 3 broken phones ready to be used on something cool
update: all of 3 have too much near terminals, wich will damage the camera and i will get mad and broke everything because i spend one week on that project, or it will just won't work and i will get mad and broke everything because i spent one week on this project :(
I feel your pain man lol idk how the phone i use now isnt broken cuz this shit is infuriating sometimes, especially solder
Wow awesome good work keep it up
☺😊☺👍👍👍👍
Can I just attach a camera to an OTG flash drive and avoid knowing which camera has USB interface or not? I am just thinking. Thanks to whoever answers me.