Xbox one x Faulty Retimer HDMI Controller chip - No signal Black screen repair
Вставка
- Опубліковано 22 лис 2019
- ⭕ Ask questions and Engage in our Forum at northridgefix.com/forum/
⭕ Need a repair? northridgefix.com/mail-in/
⭕ Visit our ecommerce shop and buy all your tools at northridgefix.com
⭕ We are an Amtech Flux Distributor. Buy AMTECH NC-559-V2-TF Flux
northridgefix.com/product/amt...
Microscope northridgefix.com/product/mic...
UNI-T UTi260B thermal Camera
northridgefix.com/?s=thermal+...
Grinding pen
northridgefix.com/product/gri...
Low Melt Solder
northridgefix.com/product/low...
NorthridgeFix T-shirts
northridgefix.com/product/nor...
Weller Soldering station ebay.us/1mvgt5
=================================================== If you are local, drop in and say hello
NorthridgeFix
19365 Business Center Drive, Unit 7
Northridge, CA 91324
Phone: 818-668-7058
NorthridgeFix.com - Наука та технологія
My work quality has tremendously improved through his videos. I have learned a lot n actually solved tones of problems but I don’t really understand wen people dislike his videos, does not really make sense.
You are probably the best with small electronics I have ever seen ......Great Video
What a fantastically educational video, thank you for making these
I counted like 30 secs of heat. What temp is the heat gun set to. I put mine up to like 750 degrees and it ain't comming off. You make it look easy. Also when u reapply solder what kind of solder did you. All u say is unleaded solder.
Good videos dude. I like how professional you are.
I love your repair videos. I want to switch careers now, thanks!
You doing great job👌🏻
Perfect repair 🔥👍
Great job again like always
Nice vídeo. Do you pre heat the boards?
Great video, at the same time this is horrible that the Xbox one x has these faulty prone chips given this thing was barely launched back in 2017 or 2016 and is recent high end $499.99 USD when new so it was a premium game console and it has these faults.
I've been looking into getting one but really scared away from finding this information for over a year now and just reminds me of my 2002 Xbox going bad around 2005 to 2006 leaving me very frustrated back then because my friends were also having problems with their then brand new Xbox 360s.
Great Job ,do know maybe what value is SMD capacitor C50 ?Thx
Bom trabalho meu amigo!
Nice work.
Thanks a lot!
Anyway to find out what size smd cap that is at C36? I apparently knocked it loose when heating the IC and it disappeared.
Do you know where I can find out the pins for the MN86471A? I was just checking for shorts after replacing one and I have got a couple od pins not next to each other that have continuity.
Nice Sir 👏👏👏
Again i like ur video as obviously....
I've tried using a butane soldering iron/heat gun and also have used an 18v ryobi heatgun for multiple minutes straight trying to get my ic chip off and it wont budge, any tips? Also using rosin flux with both
you probably needed to take the board off the metal bottom. that acts like a huge heat sync...
Hello
I played games with my xbox one x and after two hours I turned it off. the day after it starts but it shows nothing on the screen but I hear the startup sound on the headset. I replaced the HDMI cable, tried to reset it using the power button and two other buttons, showed nothing on the screen. I had it for a year on the same table with the same hdmi cable on the same tv.
I opened it and everything looks really nice, no damage and not dusty.
Does the autodetect function works with the replaced retimer chip?
What are you applying in the beginning? Is it liquid soldering paste?
i have been watching every video and i love them , i have all the equipment, im struggling today to remove the same chip, will my hot air work its 450deg low end any tips?
Good channel)
I can't get the chip off...I am using a solid rework station, at 500c and that retimer isent budging, Iv had it on the chip for 3 minutes straight and it jasent budged...
i have a 1x with bad retimer but also r31 and r32 are missing what value are they ?
Hi I have an x box one x and I am having problems with the hdmi port it has going on for to long now so I took it in to see if they can fix it but they couldn’t so maybe you can help me please
Its seems that the retimer ic occurs mostly when pairing an Xbox one s or X with a 4k tv. The fat xbox one never had this issues and its locked at 1080 max.
the og one also didnt have the design flaw of putting the retimer right above the exhaust port. the solder back there takes a beating
Can this chip cause no power issue/ not turning on? Also does anyone know where I can find the Mosfets for the VRM? I would greatly appreciate any help pointing me in the right direction.
I sadly have that problem with my Xbox One X, i bought it used and when i turn on the console. And it worked fine, then after a week, It just say no signal and Black screen, i have tried diffrent HDMI cable that i know work. But they wont work on the Xbox One X enymore. What do you think is wrong with my console?
The connector is not defective the defect is at the two holes that is the wool the first broken pin that you do not connect to the pin so the drive is not recognized
Big boss☺️💪👍
Good job
From Libya
Which temperature and airflow are you using? It takes a lot of temperature into the pcb
He said temp 380 and speed 50.
How much heat do you use?
Just had this happen to me today.have to ship it back to the states.expect better for how much you pay for it
What type of tip is that and size?
what kind of Microscope can i use for think kind of repair ?
What is that gel, and is it necessary?
Usb flash drives are quite easy to fix, been doing it for years anyone can do it.
Hi. What is the exact model and size of the retimer chip please?
My xbox one x is having the issue where the screen constantly flickers black, should I get your services to replace my xbox's retimer chip?
Thanks for video, what gauge jumper do you use and how do i get it, thanks.
Any mobile phone speaker has very fine guage wire inside. Just break open an old broken mobile phone speaker using plyers
@@bellslinki Ok thanks, saw one on the street and i said wonder if anything i can use didn't pick it up mainly cause wet, but i wont let the other one pass, So use the coil in the speaker?. Thanks again.
Yes. The wire has an enamel coating so you can scrape it off or some people just use the heat of the soldering iron to break down the enamel.
@@bellslinki Ok Thanks for your help and reply. I will do that.
What is happening at 4:04 ? Is he adding more solder with a standard iron? Or getting rid of excess with an iron?
Adding a bit more to the right side, which you can see had a few pads with too little solder, and then just doing a pass on all the other sides to ensure they're all good too.
I had to send mine to Xbox for service. Same thing no video signal. They charged me $250. They either fixed it or sent me a very knew looking Xbox 1X 1T reconditioned unit.
Can this do the same for the xbox beta?
What is the name of the liquid you use?
after soldering the chip the xbox does not start, could it be a wrong soldering? thank you
Can you please tell me the name of the gel and the copper string please
Flux and desoldering braid
How hot was ur heat gun?
Hello, i have an xbox one x mainboard, there are missing capacitators c1264,c16 c18 beside the retimer chip, can you tell me the values of these missing capacitators, thanks in advance
According to leaked schematics, the values are as follows.
C1264: 22uF, 6.3V, 0805
C16: 0.1uF, 16V, 0402
C18: 1000pF, 50V, 0402
Feel free to find them yourself and verify, though.
8:50 why not just installing a software for hfs+ formats for windows?
@@laboratorioassembler You are wrong it is possible to format drives on Mac to hfs+ in which case the USB dirve will not be readable by Windows machines. Yes they are formatted in the factory as fat32 but an user can reformat the drive to any file system they like, they can even format it to proprietary or encrypted file systems that will not be readable by Mac's or PC's.
HEY I NEED U TO FIX MY XBOX SERIES X IM HAVING THE SAME PROBLEM LIGHTING STRUCK RIGHT OUTSIDE MY HOUSE THE CABLE BOX AND WIFI ROUTER MY XBOX HAD A HARD WIRED ETHERNET CORD GOING TO IT WHEN THE LIGHTNING STRUCK
Is the Xbox one x chip the same with the one S if not ,can I still use a one x chip
Great vid! and for the usb I don’t think that the magnet wire can handle the vcc on the usb try another wire! Good luck
My console has the same problem. I was playing it today, and it just went black and said no signal.
Ayuda hice esto ala perfeccion
Prende pero no se ve
Antes prendia y varios minutos se va la imagen.
Why don't you ever check to see if you have power coming out of the USB connector. You could have something wrong with the power connectors internally. instead of giving up after checking the caps and or resistors.
I have a series x. Ive had it for about a year and suddenly out of no where im having this issue. Theres no damage to the hdmi port. I just want to know why this happens
heat related usually. The retimer is at the back of the unit near the exhaust port. Why msoft chose this layout is beyond me but likely a tradeoff for downsizing from the OG one. Over time the chip gets damage from heat
i have used xbox one s and i want to know why this problem happened and if main will be in this problem one day
what is the goo called
I have replaced both HDMI port and Retimer chip and i'm still getting a no signal on the screen. Is there any other component that can be causing the no signal. The HDMI port is soldered properly and the Retimer chip as well.
Did you find a fix??
dead HDD can cause it.
If I can get remote play to work on my phone and the Xbox is working fine but no signal on 3 different TV's with two HDMI cables, is this likely the cause of that? All cables are in the right places. I mean, if I can remote play the console is perfectly fine so it must be the HDMI controller chip or the port itself?
Yes. If the Xbox companion app can see your Xbox when it's turned on and you can access it remotely, it's a video output problem, most often the retimer chip.
@@ToddStone thank you!
what temperature do you use on the hot air?
nvm, 380 degrees at 70-50 air flow lol thanks!
You sure he don't mean 380 Celsius
الله يعطيك العافية..بدنا فيديوهات صيانة لابتوب وشروح عن الخطوط والجهود
What was the solution at 0:56 that looked like Vaseline before you used the heat gun? Ty
flux
Ketchup
Mine Xbox one s boots up without any green screen and is showing just a black screen...the controller is also not connecting to the console.....i bought the console one month ago....please help me😭
What kind of solution are you using on the re-timing chip to get it loose and reattach and is it heat your applying to it both to remove and reapply
Came here for that same thing
He's using soldering flux gel. Using an electronics rework heat gun and the proper tip, the solder will heat up an become liquid.
Really ? Lol 😂
HI
I CHANGED ic tdp158 but no signal
why do these fail ? heat ? if so would thermal pad help
yup! Msoft in its infinite wisdom decided to place the retimer directly above the rear exhaust port. The solder back there takes a beating over time espeically if you marathon game
How much is a repair for a Xbox that wouldn’t turn on
Can this be a cpu problem ?
Would a faulty chip cause the "mode not supported" error?
In the same situation, replaced the hdmi retimer but only 1080p is recognized.
What is that gel stuff called?
Paste flux for soldering and disoldering and liquid flux for cleaning legs
What tool were you using for the heat source?
Did you ever replace your chip yourself?
My One X won't power up. No lights no sounds nothing. Could it be from HDMI retimer chip only?
Mobo and or HDD is likely fuked
I HAVE THE SAME PROBLEM IN MY XBOX ONE S BLACK SCREEN AND I CAN'T FIND AT FIXED MAN 😓
How much it cost to replace the HDMI chip
About £6
@@silentthunder890 I just recieved a bill and report from the technician he requests about 60£ !!! 370 dirhams
Here 35 $dolar
After i changed this ic HDMI I have very slow boot (about 1 minute) in Green video...Why?
slow boot screen (the green logo screen) is usually a sign of dying HDD
Replaced the 3rd retimer chip in 2 months. The last one worked for 1 hour. Any thoughts?
did you solved?
Yes. Replaced the southbridge. It overvolted the retimer chip. So said the repair guy.
Could you please tell me how much it costed you to get it replaced each time I might as well sell the Xbox and invest into a PC if it's over $100
@@bumbaclaat3212 for the retimer chip only ~ 45$, and retimer + southbridge ~ 120$. PS: I live in Romania.
What is the liquid used to remove and put on the chip?
I believe it’s called flux.
It's flux for electronic repair don't use plumbing flux as you will ruin the PCB board after you have used it clean with ipa or use no clean flux
Ketchup
A x box one x retimer chip do fit a one s
No not compatible.
How much would it cost to have you fix it?
We don't post prices on youtube as they can change with time. You can contact us at northridgefix.com/contact-us/
My xbox one x seems to have the symptoms but only with 4K output. When it is set to 1080p it is fine. Tried different screens and cables and still same results. Any one else experience this?
Should I buy a one X ?
Mine just broke 😭, at least I got 4 good years worth of playing
the black screen of death or the no signal is happening to alot of people around the world during quarantine even me
Should I Buy the One X
Did this happen after an update?
Can you explain better next time what exactly your doing please?!! Like each process, like adding flux or whatever that clear goo melts down into. Which and all tools needed or being used in this process. I have an Xbox one x that I believe the retimer chip is the issue. Have never worked on a chip board before so a little nervous. Also needing to know exactly what I will need too do this repair myself, I’m not paying Microsoft $250 plus shipping for an out of date warranty. I miss the old Xbox/Microsoft customer support where I could just call in and talk to someone. They’re new system is garbage in my opinion and makes you jump through a ton of hoops to just end up paying out almost $300. I expect a class action lawsuit to come Microsoft’s way just like the way the Disc Drive problem. Who knows, really frustrating
Question: I had temp at 217C and air speed at 70. I tried flux and using reflow gun in conjuction with solder gun and can't get the IC to come free. Not sure what I'm doing wrong. Help.
217C is very low for standard rework stations. Try using 350C with low air flow and lots of flux.
Add leaded solder to the legs to lower the melting point, use flux/soldering iron/solder wick to remove the solder from the legs, then raise your hot air temperature to 390 with 6 airflow, add flux and see the chip come right off.
An alien appeared at 2:15 on the heat dissipation pad and it was killed :( ya di3ano ken chab tayib!!
???
can I mail my xbox for repair?
Yes northridgefix.com/mail-in/
So hard to do it by yourself
ikr, replacing the mobo is childs play compared to this!
Can I send you my Xbox one x to get repaired
What's wrong with it?
@@NorthridgeFix well I went to turn it on last week and All I get is the no signal screen but it turns on just fine just no picture
@@louisedwards1680 Yes you can mail it in. If you need to quote first use the contact us form . northridgefix.com/contact-us/ We don't post prices on UA-cam as they can change with time and this is not a support platform. To mail your device, fill out the mail-in form and follow instructions. northridgefix.com/mail-in/
My comment was for flash drive repairs
You'll need data cable for the middle pin (data pins). I learned it the hard way
what do you mean ? thicker wires ?
@@mohsentabouna6401 Not thicker, data cable. I had some that even with data cable didn't work
Big. Boos
Most of Indian waiting your videos
+
Who is big boss? Your father ?
his uncle from mother side
First
dont buy the timing chip from the link in description. $50 for a $11 timing chip is insane
5 chips for $50.