How to fix a broken fence using easy step by step instructions.
Вставка
- Опубліковано 21 сер 2024
- A "HOW TO" range of videos giving you step by step easy advice for all your DIY projects.
In this video I show you how to repair a broken fence panel using minimal tools and simple techniques. This fence repair only took 10 minutes from start to finish and save you buying a new panel, for any help or advice please comment on the video.
#diy #howto #fencing #fence
![How to repair a fence post [Cheap fence fix!!!] Handyman fix (AMAZON LINK)](/img/n.gif)
Great, simple to follow! I’ve just replaced several boards and am a fast approaching 70 year old female!
Thank you 👌
That's amazing that you have fixed your fence by following my video! Thanks for your comment 😁
Today I replaced two boards in a fence panel, and I'm very pleased with the result. I would have posted before and after photos but can't.
Once again, thank you so much for sharing this video. I've learned some useful techniques.
You are a star!
Brilliant, hope my video helped
No problem, im glad you found the video useful!
Wow, well done Suzy. You've motivated me too.
Great video - I'll tackle mine now. Thanks so much.
Im glad you found the video useful. Don't forget to hit the like button 👍 and give me a subscribe!
a really nice simple to follow video, nicely explained. Thankyou
Thanks for your comment, if you have any suggestions for any mire DIY videos please let me know!
Great video, saved me a small fortune!
Im glad you found the video useful!
Thank you SO much! This is really helpful 👏 :) 😀
Thanks for your comment and support
How did you get on Suzy?
Really helpful thanks. Got 8 boards to do. Will give it a go!
It was really easy to do. This was my first diy video! I highly recommend getting one of these if you've not already! amzn.to/3Iia0jK
Excellent!
Thanks for sharing your knowledge with us!
ATVB.
Take care,
Steve. 👍👍
Thanks for your comment and support!
Nice work thanks for sharing, so useful to have it on video to refer to as well 👍😊 Our local fox has mullered two planks, bless his little white paws🙄🙄🤬. Although there's plants in the way, I think dad and I could tackle this. Even with treatment our planks had faded to a nice shade, so the new ones will stick out a bit until they age - at least they're behind a small conifer😊👍
Thanks for your comment, its a really simple job to do. If you can get a thin crowbar then it makes the job a lot easier!
@@FixitwithFowler We've plenty of crow bars but none like yours, so I'm going to order one, as it looks key to doing the job right👍😊
This is the link for the crowbar only £5.49 at screwfix, this is the link www.screwfix.com/p/magnusson-utility-bar-15/4594v?_requestid=395472&fbclid=IwAR3UviChBG-1DnM6ILXxLwlRpyNWe1jMSsiAbZqVJeSVDf0BU21C5OG6BwA Please dont forget to like my video and subscribe to my channel!
@@FixitwithFowler Cheers - thanks so much👍👍✌️✌️😊😊
The pliers behind and tapping the wood is a good tip , tackling this tomorrow and wasn’t quite sure how to tackle it without gouging the nails out
Hi Gareth, glad you liked the video. This was one of my early videos so little editing involved. I hope you have clicked the 👍button and subscribed to my channel!
@@FixitwithFowler subscribed and liked mate✅ thankyou😊
@@FixitwithFowler I did get this job done mate thanks again . 3 slats replaced and painted
@@gareththompson7785 brilliant, thanks for your comment it really helps to grow my channel.
exactly what I was looking for. Nice and clear, thanks!
Hi, thanks for your comment. Please look at my other videos and don't forget to subscribe for more videos!
Thanks for the video. You recommend that pry bar as best way to remove without breaking or splitting the board? I cant get my nails out as too deep. Tried pulling board with rear of hammer and it started splitting
Hi, i would recommend getting a thin crow bar/pry bar. You can get one from amazon relatively cheap amzn.to/3YDFR5G
Thank you,great video. I've got some fence panels, although in okay condition. I just want to strengthen them. What would you advise? I was thinking of making pilot holes and screwing in some external woodscrews from the fence into the baton. I think the fence has severely weakened since Storm Eunice.
Hi thanks for your comment. The strength of the panel comes from the horizontal battens on the fence panel. You could add an extra batten to the fence panel then fix the boards to it with nails or screws. If you are using screws for the fence panel feather edge boards then a pilot hole and a small countersink will stop the boards splitting. Hope that helps? Please don't forget to like my video and subscribe to my channel!
@@FixitwithFowler that's useful advice, thank you so much. You deffo have a sub from me matey. Keep the great content coming.
Thank you so much, if you have any video ideas please let me know!
I have those fence panels at the back of my garden. And need to replace about 3 of those boards. Are they called shiplap panels?
These are feather edge boards, meaning one side is thinner than the other. Shiplap boards, actually fit together like a tongue and groove system.