*Precision screwdrivers sizes are T5 for the bottom plate and T6 for the screws on the plastic housing* 0:00: Introduction, preparation and tools 1:16: Removing the metal band from the base 2:36: Removing the silicone sleeve from the base 4:33: Cleaning the base and silicone sleeve 5:56: Further disassembly to remove charger port plastic 9:05: Reassembly and outro
You have 450 subscribers. 100k people don’t own the peak pro you num nut people watch your video over and over because it’s confusing and most people are in your comments saying you jacked up their piece permanently. I have put 5 ounces of dab through the rig and didn’t have this problem because I cleaned it. You had seepage and it probably got a lot worse after you tore the thing apart and removed glue that you just never put back. You’re an as hat on UA-cam views are nothing I can bot a video up to 20k in a day.
@@jordanbruce I just comment on 8 separate comments that said you did I’m not going to keep digging . The issue is you overlook problems you don’t want to have . Not an engineering brain more of a donkey
The fact that this video had 100k views and youve only got 400ish subscribers is ridiculous. You deserve so much more then that. Thanks for the video brother very informative and very well done. Keep up the good work 👍
3 years 5600 dabs later… I now have a clean Peak! It was a mess and went wonderfully. I actually had reclaim outside the silicone under the metal band, acting as glue. Thanks for the video. I wouldn’t have attempted it without it.
Wow I did this so fast because I watched your video like 4 times before fully doing it to remember every step and it literally took me maybe 20 minutes to do everything! I have the opal peak pro and it was yellowing and after taking off everything it’s back to the light color! I can’t even believe how different it looks with a good clean!!
Damn I love the opal peak pro tho 🔥 I broke my original glass in my peak pro, just a tiny drop into my sink not very hard either but that was enough to break the mouthpiece part off so instead I had a shard of glass sticking up I mean technically still usable if you're into cutting half your face off when you're dabbing. 😂 So well, my point is I'd love one of those but i don't think I'd ever buy one my dumbass would end up probably breaking the glass so maybe I wouldnt even think about having it leave my carpeted room then... I've got the Antidote I think 4 inch glass piece right now with 7 or 8 perc holes it's not too shabby. I don't think you can really find the original opal glass anymore, I've looked just to see. Ofc can't find any of the whole opal rigs in stock either which doesn't surprise me I think they were very limited.
Ya I have no idea how you guys are fuqing up your shit so bad but that part is sealed with adhesive you’re not supposed to do this. The air holes go straight to the glass . Really so confused how you could fuq up the piece all I ever had is a tiny bit of residue in front of the air holes but it’s on top there would be no way for it to go in the cracks. RIP
I had to order the right screwdriver bits halfway through (T6 in case you guys were wondering) but i got it all back together. Preciate it man. This vid helped a lot
@@valledecauca1087 ah man i can’t remember it’s been so long… i think i actually went down and tried T5 and it ended up working. I’m not positive though.
Thanks for this, I just did this without realize I needed that special screwdriver but I still managed to snap the metal part back on. I only have around 1k dabs but I used like 20 swabs lol
Hey bud I was just about to do this kinda video and I found this. Great vid! Gonna be sharing it with only the customers that understand when a door says pull you don't push. Thanks for you work!
Amazing video just cleaned out mine for the first time it was gross. I did have slightly more adhesive because it’s the newer model which caused a little tear in the silicone. I noticed that it wasn’t in an area that it would effect it so its still working great. Thanks for the amazing video!
Thanks brother I had to order a new one after 4700 dabs it was disgusting after taking apart it leaked into the electronics and gave me that red white red white death glow now thanks to you I can keep the new one clean.
If you need reassurance is just did it and it’s really not that difficult I couldn’t get the charger port put together right but half an hour of messin with it I got it to look fine little messed up but works
Thanks for this, I have had my pro since release and boy was she nasty inside. It can seem a little intimidating but honestly was a really easy task and I'm glad I did it. I have myself a brand new pro again lol
T6 is the precision driver you need for the screws. Thanks for the video! Have thousands of dabs on my peak pro, thought I could just change my chamber and it would be fine but after a few weeks it kept hitting me with blinking white or red. Though this is a bit of work it does fix the issue! Appreciate the help!
If you break off that retaining tab on the plastic ring around the charging port, it will make subsequent cleanings easier. Without the tab, you can remove that plastic ring with a pair of tweezers and won't have to unscrew the device. The tab doesn't do anything other than make the plastic ring more difficult to remove. The ring stays snug around the charging port without it.
Haha. I broke mine off by mistake on my old Peak Pro trying to stick it back in, and it made life so much easier. When the warranty runs out on my Guardian, I’ll be doing a deep clean and breaking off that tab. Thanks for the great guide!
Fair warning.... tried this on my v2 pearl and it was ripping the silicone on underneath the metal band. Safe to say they put waayyy stronger adhesive underneath it now. Wish I hadn't tried this to be honest
Also just tried this on my v2 with no luck whatsoever i stopped trying thanks to your comment this should be way higher up in the comments, have you found a solution yet also hope you were able to fix your puffco please let me know if you found a solution there isn’t even anything on the website for it absolutely ridiculous
Bought the flourish so I decided to give this a go on my Opal. Super easy step-by-step and I wish I did it earlier because I couldn't get all the yellowing out and I had a bunch of reclaim under the metal band holding it to the silicone.. Looks SOOO much better though and now I have two peaks haha
I'm new to the puffco family this is a grate video tutorial for beginners watched the whole thing and can't wait to try it's gonna be a challenge but i think i can manage may use the video for help thank you so much stay puffy
Completed this well needed cleaning. My only concern after putting it back together, my chamber now sits noticeably tilted towards the glass. No idea how this happened but it works so I'm not about to take it all apart again. Thanks for this!
I have a question. Do you have to take out the charging port in order to put the plate back on ? Because I for someone can’t manage to get my base plate back on
Yes. The entire reason I take the charge port off in the first place is so that I will be able to put the plate back on. It is best explained from 6:13 to 6:35 in the video 🫡
Do you know if doing this Will this void their warranty? I have an opal and it’s started to look kinda bad under that silicon.. but don’t wanna void anything if I have issues down the road. Thank you
It will not void the warranty if you do it as instructed. The “void” sticker is at the front seam of the unit. If you only open it at the back as far as I do in the video, you won’t break the void seal and your warranty will remain valid.
@@jordanbruce thank you so much for your response will be trying this soon been trying to figure how how to deconstruct it to get in there just like this. Your video is super helpful
Thanks for the video! Wish I could post a picture of how mine looks! I'm just about 1900 dabs in and have a big ol circle underneath the silicon! It's been bothering me for months now so thank you!
Thank you so much for the video!! I was able to do it all, and it came out amazing! But i noticed i had a lot of build up inside the unit. Would it be okay to split it open all the way, to clean inside as well?
Yes that’d be fine too, it’s really just a battery and a wire leading to the atomizer connection in there, so just be sure to remember exactly how the battery and internal components fit inside.
2:17 question ❓ is that glue as in from factory? Or another word for the reclaim when it's cold lol man i hate that oil gets under there they gotta fix that cuz its like the ONLY big issue I have with it my peak has oil all over the insides cuz i never cleaned it and really treated that unit like a tank a test unit and it lasted 2yr never clean until it finally i guess shorted it when oil got too deep inside the CPU or w\e electronics inside. So that sucks but it is good at the same time cuz they can with stand a lot of abuse
@@DJdeliverance Yep, glue from the factory. There’s a little bit of glue in a couple of spots between the metal band and the silicone. Like little drizzles of glue on 3 spots, both sides and the back.
@@jordanbruce is it really meant to be taken apart like this will this void warrantee?b cuz I'm able to return mine so I usually end up doing that before a 2yr mark lol. Really wish this wasn't an issue tho but it happens over time idk if there's any avoiding it. The other cool thing if you leave it off it's like having a white one lol not sure how it would function that way tho lol. Thanks much appreciated. We gotta clean out the guardian now before it gets this bad lol the 3d chamber was a game changer
Hot glue is the best option if you’re going to use glue. It is sticky enough to stick forever but will also come off when you want it. However, the plastic piece around the charge port acts as a lock for the metal band, so you really don’t need to glue it if you don’t want to.
@@jordanbruce the plastic piece got a lil bent on the removal. It's still fine and charges but I'm not sure it "locked in". It seems it did but I'm only 75% sure. Thanks for everything
As someone who’s been thinking of this or the Dr dabber switch this is super handy 🙂 I don’t think I’d be getting to 1500 dabs anytime soon but once I do I’ll know how to clean it if I go for this device.
I wish you could get a replacement sleeve from puffco mine has tare around the air flow to the glass. Cleaning for the last year and a half finally got it. You know anywhere I can get one?
Hey Jordan! My peak has residue underneath the surface that you cleaned in your vid. Looks as if it would take further disassembly to reach. Any advice?
Trying to pop it off is where I went wrong I guess. Now my puffco no longer has a warranty and is broken! I wedged in the Philips and there was no pop, used some extra force cause you said it may be difficult and I realized I was pulling off the plastic along with the hard plastic, if you put a flashlight underneath the hard plastic (when unassembled) there's a bunch of holes from me ripping it off, that's the glue maybe? The point is don't try this its not worth ruining the look of your peak if you fuck up like me.
dude amazing I have the puffco peak pro I believe its the same one.i just got it last month as well as the 2dxl chamber.. is it the same one had currently on the site??? best vid on here
It’s not swapped, I’m taking it off and putting it back on. You have to take it off because the metal band will not fit back over it once it’s taken off. You have to put the metal band back on, THEN install the charge port piece to anchor it. You can’t leave the charge port plastic on and get the metal band back over it. The band will come off, but not back on.
Having an issue after almost 3 years with the pro, the power button isn't acting like it wants to work at times. Anything that can be done about that???
@@davisdooley9930 The short answer is yes, but please be aware that the guardian is known to have a lot of glue holding the metal band in place, so it likely won’t come off as easily as the metal band removal demonstrated in this video.
This buildup doesn’t constitute a warranty claim, Puffco considers this normal wear and tear. Unless your Peak breaks for some other reason, you won’t be able to swap it out on warranty :/ The good news is, this isn’t very hard to do (in my opinion).
Did it on my first try, slightest cosmetic damage. Broke part of the charger port cover, but it still clicked in at the end perfectly. Thanks for the awesome tutorial! I only had 850 dabs but it sure was like 1000+ 🤣🔥
Ultra curious to know what sort of batteries are contained within. More 18350’s in series and parallel? Also, as someone on the fence about buying one of these, those molded plastic halves look incredibly inexpensive. Pcb inside has to be ultra cheap. Flat flex cable is scary as I’ve used these in the past and have and connection issues. So where is the 400 dollars? How much hype is tied into that price tag? Not trying to be a DB. I really want one of these things and I’m trying to justify it.
I think it’s more of a is it worth it for me kind of question. I own 2 e rigs they just make dabbing easier honestly I don’t have one of these but it’s like the “premium” brand so that’s how it’s justified to them . . . I’m rambling on after a dab lol if you can afford an erig tho ( any kind ) worth a try
I did this a few hours ago and although it was very stressful to remove the top part it was fairly simple. I would do this at your own risk tho. When I finally was able to pop open the top, I noticed that the glue that was in there stuck to the inside of the puffco and when I opened it, it ripped some of the sleeve or whatever the material is and just stayed glued to the cover. It still works but I mean it’s not ideal. Great vid btw !
I just did this deep cleaning for a friend of mine (who saw my video😁), and his silicone sleeve had a LOT more glue on it than my 2 units did. I really had to work it off really slowly and carefully as there was glue the entire way around the band, not just in spots. Took probably 5 whole minutes to work the excess glue off.
Can’t even seem to remove my security screws on the bottom, I’ve used T4 all the way to T7 and none move the screws at all, I got a precision kit from Amazon with multiple bits and even both a solo T6 also just to check that and none move any of the screws any help?
where you pull the silicon base from the actual unit, with the dried glue section mine is slightly loose i would say, not as fitted as my other puffco is that normal since i took it off or did i just put it back on not as good
Will the unit charge wireless if you leave the the charge port off? I use my cell phone wireless charger($12 instead of the charging dock for over $100) anyway so why not leave it off which I just might do when I have to do this deep cleaning. I only have less than a hundred dabs right now.
Man thanks for this, i do wonder if the metal band is secure and doesnt lift or work its self up possibly blocking off the usb port? Also does the bottom sticker/rubber sit flush with the bottom after being removed or does it end up looking like a sticker woth once corner unstuck cuz the adhesive got dirty before you stuck it if you understand my example? Either way great video and thanks again if you have time to reply.
Hello, thanks for the kind words. The metal band will never lift up and cover the USB port, as the plastic piece that plugs into the charge port (seen at 10:55 in the video) locks the band securely in place around the charge port. Once it’s in place, it’s not going anywhere. For the sticky bottom, it does not lose its tackiness once you lift it. This is because the adhesive doesn’t cover the entire bottom, so you can get something underneath the silicone and get a grip on it without having to pick away at the adhesive. Hope this helps!
that happened with mine. Did everything perfectly but now the metal plate is millimeter off and the charger only fits half way and doesn't charge as fast as it use to
@@comradetedd it's a shit show to get the metal plate back on. I had to enlist a knife and a hammer to get mine back on all the way.. Literally had to finesse the charge port surround as best I could back into the hole on the metal plate. Then I took a dead blow mallet and hit the metal to force the port back into place. Before I had same issue was charging like shit and if you touched it while the cord was plugged in it would fall out 😂😂
I thought my puffco cause just defective when I started noticed buildup under the silicone and not just underneath where the glass goes but also build up on the sides where you hold the peak im right around 1.5k dabs so I feel like it’s the perfect time to do this
Ive got a lot of build up under there i can see but ive been scared to do this. Im afraid it wont work once i put it back together lol. I asked Puffco what to do long ago n they told me it wont affect the functionality of the unit. Im thinking eventually it has to.
*Precision screwdrivers sizes are T5 for the bottom plate and T6 for the screws on the plastic housing*
0:00: Introduction, preparation and tools
1:16: Removing the metal band from the base
2:36: Removing the silicone sleeve from the base
4:33: Cleaning the base and silicone sleeve
5:56: Further disassembly to remove charger port plastic
9:05: Reassembly and outro
godsent
You have 450 subscribers. 100k people don’t own the peak pro you num nut people watch your video over and over because it’s confusing and most people are in your comments saying you jacked up their piece permanently. I have put 5 ounces of dab through the rig and didn’t have this problem because I cleaned it. You had seepage and it probably got a lot worse after you tore the thing apart and removed glue that you just never put back. You’re an as hat on UA-cam views are nothing I can bot a video up to 20k in a day.
@@jordanbruce I just comment on 8 separate comments that said you did I’m not going to keep digging . The issue is you overlook problems you don’t want to have . Not an engineering brain more of a donkey
Bought the puffco during the start of the pandemic so you can imagine the glob puddle i got underneath that silicone thanks again OP
I followed every step and had no issues. Now I have a brand new puffco. Thanks so much. Much love from costa rica.
You have hash rosin there?
@@fangfang258with the right connection it’s everywhere brudda
@@fangfang258for all we know some people don’t use puffcos for dabs 😂😂
@@fangfang258lmao 😂 there is hash all over the world. Not just in the states bub.
The fact that this video had 100k views and youve only got 400ish subscribers is ridiculous. You deserve so much more then that. Thanks for the video brother very informative and very well done. Keep up the good work 👍
Thanks brother, appreciate that bigtime 🙌
Facts !!
Thanks for being so straight forward and actually demonstrating all steps!! Peace and Puffon
Excellent tutorial. Clear and concise videos like these are what we need. Thank you.
3 years 5600 dabs later… I now have a clean Peak! It was a mess and went wonderfully. I actually had reclaim outside the silicone under the metal band, acting as glue. Thanks for the video. I wouldn’t have attempted it without it.
Got mine in July and I’m at 3800🙃🥲😳
Exactly what I needed. According to my Puffco App, 54k dabs. It was time for a cleaning. So much better! Thank you!
54k is fucking Insane I smoke more than anyone I know and I have 4k after 10 months
Wow I did this so fast because I watched your video like 4 times before fully doing it to remember every step and it literally took me maybe 20 minutes to do everything! I have the opal peak pro and it was yellowing and after taking off everything it’s back to the light color! I can’t even believe how different it looks with a good clean!!
Damn I love the opal peak pro tho 🔥 I broke my original glass in my peak pro, just a tiny drop into my sink not very hard either but that was enough to break the mouthpiece part off so instead I had a shard of glass sticking up I mean technically still usable if you're into cutting half your face off when you're dabbing. 😂 So well, my point is I'd love one of those but i don't think I'd ever buy one my dumbass would end up probably breaking the glass so maybe I wouldnt even think about having it leave my carpeted room then... I've got the Antidote I think 4 inch glass piece right now with 7 or 8 perc holes it's not too shabby. I don't think you can really find the original opal glass anymore, I've looked just to see. Ofc can't find any of the whole opal rigs in stock either which doesn't surprise me I think they were very limited.
Ya I have no idea how you guys are fuqing up your shit so bad but that part is sealed with adhesive you’re not supposed to do this. The air holes go straight to the glass . Really so confused how you could fuq up the piece all I ever had is a tiny bit of residue in front of the air holes but it’s on top there would be no way for it to go in the cracks. RIP
@@utah710 you must've just got yours or don't dab as much most of us are putting probably like 50-100 (to be conservative) dabs though ours a day
I had to order the right screwdriver bits halfway through (T6 in case you guys were wondering) but i got it all back together. Preciate it man. This vid helped a lot
What size torue tools did you use?
did you use T6 on the bottom ones too? i’ve gotten all the screws off except the bottom and tried both T6 and T7
@@markbirtley135 yeah what did use for bottom ones just ran into same issue
@@valledecauca1087 ah man i can’t remember it’s been so long… i think i actually went down and tried T5 and it ended up working. I’m not positive though.
@@markbirtley135 ok thank you
This is a life saver!! I'm almost at 10k and really needed this 👍👍 two thumbs up
Did you do it
Thanks for this, I just did this without realize I needed that special screwdriver but I still managed to snap the metal part back on. I only have around 1k dabs but I used like 20 swabs lol
yeah my metal part won't fit on anymore, it only fits to the point where its a millimeter off and now the charger only goes in half way.
That's the issue im having@@comradetedd
Hey bud I was just about to do this kinda video and I found this. Great vid! Gonna be sharing it with only the customers that understand when a door says pull you don't push. Thanks for you work!
Amazing video just cleaned out mine for the first time it was gross. I did have slightly more adhesive because it’s the newer model which caused a little tear in the silicone. I noticed that it wasn’t in an area that it would effect it so its still working great. Thanks for the amazing video!
Thank you sir for your video! Both my peak pros look like new now. Been trying to find a walkthrough video for ages!!
Thanks brother I had to order a new one after 4700 dabs it was disgusting after taking apart it leaked into the electronics and gave me that red white red white death glow now thanks to you I can keep the new one clean.
no way bro i have 20k on mine and never took it apart clean it maybe once a month
@@Stealth1228bro your lungs are cooked😭. Legend 😂
Man I’m scared to do all that, this could be profitable side gig. Cleaning up rigs
same
If you need reassurance is just did it and it’s really not that difficult I couldn’t get the charger port put together right but half an hour of messin with it I got it to look fine little messed up but works
Same here, why do the makers design the deep clean to be complicated!
@@WebbsWetPetsyeah i’m not messing up my charging port looooool
@@NewbMstrSixD9so you buy a new one
Great video!! Was starting to get worried with that build up under the silicone. Thank you ✌🏻
This video is great. I followed it step by step and have a super clean peak.
Thanks for this, I have had my pro since release and boy was she nasty inside. It can seem a little intimidating but honestly was a really easy task and I'm glad I did it. I have myself a brand new pro again lol
great video. i just bought his little brother, the new peak .thanks
T6 is the precision driver you need for the screws. Thanks for the video! Have thousands of dabs on my peak pro, thought I could just change my chamber and it would be fine but after a few weeks it kept hitting me with blinking white or red. Though this is a bit of work it does fix the issue! Appreciate the help!
Came in clutch dawg I honestly thought you couldn’t take it apart. I haven’t cleaned those internal parts in years lmao. Sparkly clean now
@@Ginjaninja12342 Hell yeah, happy to help brother 🫡🙌
If you break off that retaining tab on the plastic ring around the charging port, it will make subsequent cleanings easier. Without the tab, you can remove that plastic ring with a pair of tweezers and won't have to unscrew the device. The tab doesn't do anything other than make the plastic ring more difficult to remove. The ring stays snug around the charging port without it.
You’re not wrong sir, this is why I tell people not to sweat the plastic ring too hard. Mine’s not broken, and I leave it off for easy cleaning, lol.
Haha. I broke mine off by mistake on my old Peak Pro trying to stick it back in, and it made life so much easier. When the warranty runs out on my Guardian, I’ll be doing a deep clean and breaking off that tab. Thanks for the great guide!
Thanks Jordan! Very much appreciated. My peak pro looks new now!
Fair warning.... tried this on my v2 pearl and it was ripping the silicone on underneath the metal band. Safe to say they put waayyy stronger adhesive underneath it now. Wish I hadn't tried this to be honest
Same thing just happened to me it also snagged the charging port 🤦🏻♂️ did it still work at all? Or is it fucked now
Still works but I snagged the charging port as well because of it, so the plastic around it is all fucked.@@justinkalata2047
Also just tried this on my v2 with no luck whatsoever i stopped trying thanks to your comment this should be way higher up in the comments, have you found a solution yet also hope you were able to fix your puffco please let me know if you found a solution there isn’t even anything on the website for it absolutely ridiculous
Example e of someone you fed up
@@justinkalata2047 example g of someone’s piece you fed up
Bought the flourish so I decided to give this a go on my Opal. Super easy step-by-step and I wish I did it earlier because I couldn't get all the yellowing out and I had a bunch of reclaim under the metal band holding it to the silicone.. Looks SOOO much better though and now I have two peaks haha
Ive got the gaurdian and just dont have the confidence to take it apart like this. If it doesnt go back together i would freaking cry
Example c of some one who thinks you’re a dum a
I'm new to the puffco family this is a grate video tutorial for beginners watched the whole thing and can't wait to try it's gonna be a challenge but i think i can manage may use the video for help thank you so much stay puffy
Completed this well needed cleaning. My only concern after putting it back together, my chamber now sits noticeably tilted towards the glass. No idea how this happened but it works so I'm not about to take it all apart again. Thanks for this!
I have a question. Do you have to take out the charging port in order to put the plate back on ? Because I for someone can’t manage to get my base plate back on
Yes. The entire reason I take the charge port off in the first place is so that I will be able to put the plate back on. It is best explained from 6:13 to 6:35 in the video 🫡
Right on man for the tutorial definitely will try to do this close to those 1000 💨 I constantly clean my peak
Oh my God I opened mine. I’ve never done this cleaning and I’ve had one since they came out. Yeah it was bad but it looks all good now. Thank you.
Can you make a video doing this to the new version peak pro please. Thanks Good Sir.
Do you know if doing this Will this void their warranty? I have an opal and it’s started to look kinda bad under that silicon.. but don’t wanna void anything if I have issues down the road. Thank you
It will not void the warranty if you do it as instructed. The “void” sticker is at the front seam of the unit. If you only open it at the back as far as I do in the video, you won’t break the void seal and your warranty will remain valid.
@@jordanbruce thank you so much for your response will be trying this soon been trying to figure how how to deconstruct it to get in there just like this. Your video is super helpful
@@jordanbruce example A of you being a giant jack with a special screwdriver
Thanks for the video! Wish I could post a picture of how mine looks! I'm just about 1900 dabs in and have a big ol circle underneath the silicon! It's been bothering me for months now so thank you!
Thank you so much for the video!! I was able to do it all, and it came out amazing! But i noticed i had a lot of build up inside the unit. Would it be okay to split it open all the way, to clean inside as well?
Yes that’d be fine too, it’s really just a battery and a wire leading to the atomizer connection in there, so just be sure to remember exactly how the battery and internal components fit inside.
2:17 question ❓ is that glue as in from factory? Or another word for the reclaim when it's cold lol man i hate that oil gets under there they gotta fix that cuz its like the ONLY big issue I have with it my peak has oil all over the insides cuz i never cleaned it and really treated that unit like a tank a test unit and it lasted 2yr never clean until it finally i guess shorted it when oil got too deep inside the CPU or w\e electronics inside. So that sucks but it is good at the same time cuz they can with stand a lot of abuse
Ok so actual glue lol I should have waited before asking lol cuz it answered in the next 30s 😂🤦
@@DJdeliverance Yep, glue from the factory. There’s a little bit of glue in a couple of spots between the metal band and the silicone. Like little drizzles of glue on 3 spots, both sides and the back.
@@jordanbruce is it really meant to be taken apart like this will this void warrantee?b cuz I'm able to return mine so I usually end up doing that before a 2yr mark lol. Really wish this wasn't an issue tho but it happens over time idk if there's any avoiding it. The other cool thing if you leave it off it's like having a white one lol not sure how it would function that way tho lol. Thanks much appreciated. We gotta clean out the guardian now before it gets this bad lol the 3d chamber was a game changer
Im at 1130 or so dabs and thought “oh he’s not talking about me when he says after using for awhile” then I heard you say “1500”😂
@@Shjankee You’ll be finding out why I made the video very soon, friend 🥹
Great ass video man. Very thorough. Thanks bunches!
Thanks, nice video. Minor quibble, I had Phillips screws and two different size torx. Not the end of the world but good to be well equipped.
Thank you for being the 1st that showed all this
Is it possible to replace the glue used? Is there a specific option to go with ?
Hot glue is the best option if you’re going to use glue. It is sticky enough to stick forever but will also come off when you want it. However, the plastic piece around the charge port acts as a lock for the metal band, so you really don’t need to glue it if you don’t want to.
@@jordanbruce the plastic piece got a lil bent on the removal. It's still fine and charges but I'm not sure it "locked in". It seems it did but I'm only 75% sure. Thanks for everything
Easiest straight forward thanks for the video
Thanks your a lifesaver 🙏
I had so much build up underneath it jammed my button
Quit drawing so hard there's reason that should be happ.
Does this void the warranty?
Wait so you have to open it to get that little plastic piece off but when you close it back up it just snaps back in?
@@sk8rboimike Correct. It is shaped like a “wedge”, so it slides in easy and locks going one way, but not the other.
Can I purchase the tool set like on Amazon? May I get a link if you have one
This kit has everything you need
nice i kind of bent the plastic piece for charging port, but that is it. worked for me and fixed my light flicker problem
Thanks for sharing! I learned today that I will never ever deep clean my Peak Pro :)
If you’re scared to do it yourself and it gets too bad, shoot me a message. 👊
As someone who’s been thinking of this or the Dr dabber switch this is super handy 🙂 I don’t think I’d be getting to 1500 dabs anytime soon but once I do I’ll know how to clean it if I go for this device.
How about the v2 is it the same? Ima leave my stuff off to get more light effects
I wish you could get a replacement sleeve from puffco mine has tare around the air flow to the glass. Cleaning for the last year and a half finally got it. You know anywhere I can get one?
If you have FB, search for “Higher Ground HTX”. They are a Peak repair service who usually carries replacement sleeves (left over from broken Pros)🙌
Even if u keep up with cleaning it puffco will this happen ?
Hey Jordan! My peak has residue underneath the surface that you cleaned in your vid. Looks as if it would take further disassembly to reach. Any advice?
Mad respect. Thanks for the video!
So how can I prevent the wax from leaking in? I'm just barely about to 1k dabs and already starting to leak already
Cosmetic issue, happens to all of us eventually
How do you remove the atomizer ? Maybe mine is stuck 😅 since I haven’t cleaned it in a while
Does this work with the puff co guardian ??
is there anywhere to get replacement parts for the base. it needs a new rubber thing and plastic piece arround atomizer
Not going to lie this gave me so much anxiety im so scared to ruin my piece but ill give this a try thank you!
Did it work??
Is the same for the V2???
Yes, although I hear the V2 typically has more glue between the metal band and silicone sleeve, so please be careful with that.
thank you for helping save another puff co bro
@@christopherrodriguezplater6311 Happy to help bro🙌
Trying to pop it off is where I went wrong I guess. Now my puffco no longer has a warranty and is broken! I wedged in the Philips and there was no pop, used some extra force cause you said it may be difficult and I realized I was pulling off the plastic along with the hard plastic, if you put a flashlight underneath the hard plastic (when unassembled) there's a bunch of holes from me ripping it off, that's the glue maybe? The point is don't try this its not worth ruining the look of your peak if you fuck up like me.
Yep this is why I'm not doing it. Feels like I have to force it and I don't want to break it.
Wow you are a great instructor man
Thanks man, appreciate you saying that😊
Is this the same as cleaning the new peak pro?
Did this step by step thank god for UA-cam great vid
U gottaaaaaa do a tear down on the new Puffco pro 💯!!!
Can you do this without removing the charger port? It seems if you didnt need to take that out you wouldnt have to remove all those screws....
I wish, my friend.
dude amazing I have the puffco peak pro I believe its the same one.i just got it last month as well as the 2dxl chamber.. is it the same one had currently on the site??? best vid on here
Yep, the device has been updated but disassembly for cleaning is exactly the same 😎
What’s the reason for doing the charge port piece swap?
It’s not swapped, I’m taking it off and putting it back on. You have to take it off because the metal band will not fit back over it once it’s taken off. You have to put the metal band back on, THEN install the charge port piece to anchor it. You can’t leave the charge port plastic on and get the metal band back over it. The band will come off, but not back on.
This video is awesome the best instructions I seen also where do you get 99% alcohol
I get mine from my local drugstore. I know a lot of people who can’t find 99% in their area (usually 91 or 71%) so they order from Amazon.
You can get it on Amazon a gallon of 99 alcohol for $30
How do you get the metal band off the desert version 😭 I need to do this desperately 😅
the metal band is just part of the metal piece. Steps are the same just more glue
Having an issue after almost 3 years with the pro, the power button isn't acting like it wants to work at times. Anything that can be done about that???
how do you clean the top piece? the bottom of mine has so much wax in it
Would this work with a guardian?
@@davisdooley9930 The short answer is yes, but please be aware that the guardian is known to have a lot of glue holding the metal band in place, so it likely won’t come off as easily as the metal band removal demonstrated in this video.
What's easier: deep cleaning the pro or just sending it in for warranty?
This buildup doesn’t constitute a warranty claim, Puffco considers this normal wear and tear. Unless your Peak breaks for some other reason, you won’t be able to swap it out on warranty :/ The good news is, this isn’t very hard to do (in my opinion).
Man thank you so much!! This video was great
@@workbirdygaming Thanks for the kind words, happy to help🫡
Savior of Peaks!
Did it on my first try, slightest cosmetic damage. Broke part of the charger port cover, but it still clicked in at the end perfectly. Thanks for the awesome tutorial! I only had 850 dabs but it sure was like 1000+ 🤣🔥
im scared to take it apart now..
Just did ours for the first time after 4000+ and what a mess holy shittt😑
@@matth4069 lol
I wonder if there is some sort of gasket we could devise to put in there and prevent the oil getting in there.
I’m hard at work on an easy-to-apply solution for this👍
Ultra curious to know what sort of batteries are contained within. More 18350’s in series and parallel? Also, as someone on the fence about buying one of these, those molded plastic halves look incredibly inexpensive. Pcb inside has to be ultra cheap. Flat flex cable is scary as I’ve used these in the past and have and connection issues. So where is the 400 dollars? How much hype is tied into that price tag? Not trying to be a DB. I really want one of these things and I’m trying to justify it.
I think it’s more of a is it worth it for me kind of question. I own 2 e rigs they just make dabbing easier honestly I don’t have one of these but it’s like the “premium” brand so that’s how it’s justified to them . . . I’m rambling on after a dab lol if you can afford an erig tho ( any kind ) worth a try
I did this a few hours ago and although it was very stressful to remove the top part it was fairly simple. I would do this at your own risk tho. When I finally was able to pop open the top, I noticed that the glue that was in there stuck to the inside of the puffco and when I opened it, it ripped some of the sleeve or whatever the material is and just stayed glued to the cover. It still works but I mean it’s not ideal. Great vid btw !
I just did this deep cleaning for a friend of mine (who saw my video😁), and his silicone sleeve had a LOT more glue on it than my 2 units did. I really had to work it off really slowly and carefully as there was glue the entire way around the band, not just in spots. Took probably 5 whole minutes to work the excess glue off.
@@jordanbruce I'm super late, but what do you mean exactly by "to work the excess glue off" and how did you do so?
@@Shadow72eapersI would imagine using a little hair dryer to help wouldn't hurt.... Obviously not too much, there's battery in there remember. Lol.
Maybe heat up the dabber with a torch beforehand @@Styphoryte
Wow nice and depth video came on my recommendation
Boss man I have a huge question my puffco stop charging out of no where I cleaned my puffco and everything.
What size did you use for the hex key part?
Size T5 and T6👍
Is the same process on the peak pro V2????
Will this work on the OG?
You can use Everclear to clean it too.
Great video bro
Thanks man 🤝
You're the man for this 🎉
Can’t even seem to remove my security screws on the bottom, I’ve used T4 all the way to T7 and none move the screws at all, I got a precision kit from Amazon with multiple bits and even both a solo T6 also just to check that and none move any of the screws any help?
I’m reaching 4k on the opal this about to come in so clutch
Great video very helpful 😊
where you pull the silicon base from the actual unit, with the dried glue section mine is slightly loose i would say, not as fitted as my other puffco is that normal since i took it off or did i just put it back on not as good
Very likely that it just wasn't put back on as good, the silicone shouldn't stretch or loosen etc.
Will the unit charge wireless if you leave the the charge port off? I use my cell phone wireless charger($12 instead of the charging dock for over $100) anyway so why not leave it off which I just might do when I have to do this deep cleaning. I only have less than a hundred dabs right now.
Yes, it will still charge wirelessly if you remove the charge port plastic and leave it off 👍
Man thanks for this, i do wonder if the metal band is secure and doesnt lift or work its self up possibly blocking off the usb port? Also does the bottom sticker/rubber sit flush with the bottom after being removed or does it end up looking like a sticker woth once corner unstuck cuz the adhesive got dirty before you stuck it if you understand my example? Either way great video and thanks again if you have time to reply.
Hello, thanks for the kind words. The metal band will never lift up and cover the USB port, as the plastic piece that plugs into the charge port (seen at 10:55 in the video) locks the band securely in place around the charge port. Once it’s in place, it’s not going anywhere.
For the sticky bottom, it does not lose its tackiness once you lift it. This is because the adhesive doesn’t cover the entire bottom, so you can get something underneath the silicone and get a grip on it without having to pick away at the adhesive.
Hope this helps!
that happened with mine. Did everything perfectly but now the metal plate is millimeter off and the charger only fits half way and doesn't charge as fast as it use to
@@comradetedd it's a shit show to get the metal plate back on. I had to enlist a knife and a hammer to get mine back on all the way..
Literally had to finesse the charge port surround as best I could back into the hole on the metal plate. Then I took a dead blow mallet and hit the metal to force the port back into place.
Before I had same issue was charging like shit and if you touched it while the cord was plugged in it would fall out 😂😂
This is a great tutorial. Do you ever take your chambers apart ?
I thought my puffco cause just defective when I started noticed buildup under the silicone and not just underneath where the glass goes but also build up on the sides where you hold the peak im right around 1.5k dabs so I feel like it’s the perfect time to do this
Do a peak pro V2
Ive got a lot of build up under there i can see but ive been scared to do this. Im afraid it wont work once i put it back together lol. I asked Puffco what to do long ago n they told me it wont affect the functionality of the unit. Im thinking eventually it has to.