I love the fact that you showed everything that you put in it. Like legit boxes, and all. Plus you did the build first, step by step, and then you talk.. amazing
This is a wonderful build it says what possibilities can be done with limited room, it makes me think of life, you have boundaries you can't go beyond but you should get the most out of what you have
i've been watching a lot of videos about this case cause it quickly became my dream build. But i'm a simple guy, with literally 0 knowledge of pc building. Thanks for showing the memories install, literally every single video about this one or the max show everything except that, which seems simple but i never saw before :p Think i'll add the water cooling to my dreams too... altho i'm pretty sure that's a dream way out of my league
beautiful work,you can in fact fit 2 rads in if you get slim radiators such as XSPC radiators,also "no one who buys this case will want to put a water cooler in it" actually it's a reason i bought the case,wanted small form factor that can also fit a custom loop in.
Nice looking build! If I were to do this though, I would try to use the barrow CPU block with DDC pump and cram a 280+240 radiator into the case with soft tubing, and use the vented panel instead. If it could fit barely, thermal should be phenomenal!
Very Nice build. And I appreciate the effort you took to video and post it. Two things that bothered me. 1. a lot of 90 degree fittings, which are pretty pricey. Perhaps you are going for a look, but cheaper to bend the hard tubing. 2. the reservoir is even with the pump, so only half of the capacity is used. It should be higher and draining down.
I love the build, but after looking at the build for a moment it did need like a half inch or so more space between the fans and gpu. It was nice to see him point it out at the end. A solution although not as aesthetic, would be some noctua slim fans which would save 15mm plus the 5 he states which makes it almost an inch 👍.
And yet another awesome build! I would still like to see how you would tackle a dual build in the Corsair 1000D with a custom loop...That would be out of this world! Declassified Systems did one awhile back and I would love to see your take on one. His wasn't a dual build if I remember but what a challenge it would be.
lol you try to blurry the back of the motherboard with the different nvme i crack out loud there because i was looking to see if i can put a custom heatsink back there then i find out you were using a different nvme lol
Saw this a little too late. The issue seems to be that the CPU is receiving hot water from GPU in this build, that's why the CPU temp is high. As i recall, the rear fan is 92mm, which u could get another rad+fan there in between, reverse the water flow (going to CPU first instead of GPU first). It's gonna be crampy, but the temps should be much nicer
Just a question🖐️🖐️. Keeping the budget aside. If i want a gaming pc only for gaming and not streaming. It shd run all the games at the best quality smoothly. And obviously the cooling system shd be the most epic. How much would it cost. Can u please tell the price.🤔🤔
I have a question. What do you do with the PCs you build in your videos? Do you sell them to a client? do you disassemble them and sell the parts? or do you just leave them laying around in your office? I always wondered what happens to these monster systems UA-camrs build
Slim fans and maybe even a slim rad possibly could have helped with the clearance issue. Probably would have had to give up the RGB though which would be disappointing
hello sir! good job! that looked pretty tight! i dont know what kind of fittings are there available to buy! but i think that if there s any straight fitting (male thread x female compression) i see at least 3 cases that could have been used and it would save you 5 elbow fittings and if im not wrong i can see one of those fittings on ur radiator.. i understand that u might have to make the offset from the cpu block to the reservoir cuz the block might be slightly higher than the reservoir if there s any 16 bent fitting prolly could have worked..thats a plumbers prospective :D any way good job again for fitting all this in such a small case!
Top work as per usual my friend, tiny build that... have you ever thought of using a BLACK liquid in a certain colour build? Would be amazing I'd have though with the right case and connections etc?
Amazing work mister IFR! Keep 'em coming!
Hello, could you do another budget Setup war
Does a g.o.a.t reply
Hey mister TechSource 🤚🏼
I live ur setup
Cheers mate, appreciate it =)
I love the fact that you showed everything that you put in it. Like legit boxes, and all. Plus you did the build first, step by step, and then you talk.. amazing
Tell me what you want, but his videos are the most satisfying thing ever
He deserve way more viewers
Some of the music he chooses does suck tho.
NoBanMePLS I dont strongly disagree, as i do have a weird music taste, so the popularity would be agreeing with you
If you think that this is very relaxing then see the relaxing end on UA-cam I bet you will never get more satisfied than that...
Him and declassified systems. That guy is also legendary
PC case: Big features, small size!
me: Hey, we got some in common!
Hahaha
Him: blurs system
Also him: shows b-roll of it and has it in the thumbnail
I love ITX/Mini ITX builds and I absolutely love ur builds :D
Thank you ♡
If you read this, I hope you have a great day! (Btw, I love your channel Corey!)
Thank you Sir! Have a great day!
Thinner rad and slim fans on the bottom will do the trick, currently planning my very first custom loop for this case, can’t wait!
This is a wonderful build it says what possibilities can be done with limited room, it makes me think of life, you have boundaries you can't go beyond but you should get the most out of what you have
Drill 2 holes out the back and plum some spare radiator underneath your desk and voila super mega awesome loop.
My friend, you have done an amazing JOB...
i've been watching a lot of videos about this case cause it quickly became my dream build. But i'm a simple guy, with literally 0 knowledge of pc building. Thanks for showing the memories install, literally every single video about this one or the max show everything except that, which seems simple but i never saw before :p
Think i'll add the water cooling to my dreams too... altho i'm pretty sure that's a dream way out of my league
I like how he include the links to the parts used as if we can afford it .
?
@@DesignsByIFR he's assuming no one can afford to build this pc because he can't
AMAZING PC i LIKE the black and pink combination
Beautiful build by world biggest artists corey
5:19 Idk if u mentioned this somewhere in ur vid or someone else talked about it but that aint firecuda 520 i saw from earlier xD
beautiful work,you can in fact fit 2 rads in if you get slim radiators such as XSPC radiators,also "no one who buys this case will want to put a water cooler in it" actually it's a reason i bought the case,wanted small form factor that can also fit a custom loop in.
He is best pc creator ever in my life and also in youtube
Best work bro
Mr. IFR
Nice looking build!
If I were to do this though, I would try to use the barrow CPU block with DDC pump and cram a 280+240 radiator into the case with soft tubing, and use the vented panel instead.
If it could fit barely, thermal should be phenomenal!
Awesome stuff, now its time for dual radiators, chromax black fans, and matte black tubing
Consider it done! Thats a great idea
This is exactly what I wanted to do now I know how to improve your work thanks 😊
A question for Designs By IFR: How long does it take to make a normal custom waterlooped PC build?
Takes about a week for me but thats working a full time job aswell and also thats building the pc from scratch and filming it all
Designs By IFR Thanks for the reply!
Very Nice build. And I appreciate the effort you took to video and post it.
Two things that bothered me.
1. a lot of 90 degree fittings, which are pretty pricey. Perhaps you are going for a look, but cheaper to bend the hard tubing.
2. the reservoir is even with the pump, so only half of the capacity is used. It should be higher and draining down.
Huge respect to your efforts ❤️👍
You can fit an alpha cool 92 rad on the back and a 120 or 140 on the top towards front end
I love the build, but after looking at the build for a moment it did need like a half inch or so more space between the fans and gpu. It was nice to see him point it out at the end. A solution although not as aesthetic, would be some noctua slim fans which would save 15mm plus the 5 he states which makes it almost an inch 👍.
Great build, good looking, and neatly done.
Water-cooling a great airflow case does not make a lot of practical sense......and I love it! Beautiful work and perfect color choices.
This channel is underrated 👍
Great work sir really appreciated!!!
A question for Designs Why different m.2 nvme ssd in 5:27 and 3:15 ?
The fans on the top were probably plenty to get air moving in there. I would have done a run with the bottom fans removed.
This is what i want to see this is what i like in the small box case love it!
Thank's for giving me an OCD outrage over that EKWB logo on the CPU block.
once it comes out you should do a build with the 3080
Is a monster this pc! Nice
Maybe instead of top fans you can try a passive radiator and some custom plates to the back so the air is forced through the top?
I love it, for a bit more aesthetic could probably use custom purple and black cables, that's all though. Great build man!
Shouldn't you remove the sticker from the ssd to make better contact with the heatsink?
And yet another awesome build! I would still like to see how you would tackle a dual build in the Corsair 1000D with a custom loop...That would be out of this world! Declassified Systems did one awhile back and I would love to see your take on one. His wasn't a dual build if I remember but what a challenge it would be.
Gorgeous purple liquid. brand and specific color?
Yeah would also like to know?
nice vid, hopefully I will have the courage to build customs, right now with the same case is running 240 AIO....
lol you try to blurry the back of the motherboard with the different nvme i crack out loud there because i was looking to see if i can put a custom heatsink back there then i find out you were using a different nvme lol
Saw this a little too late. The issue seems to be that the CPU is receiving hot water from GPU in this build, that's why the CPU temp is high. As i recall, the rear fan is 92mm, which u could get another rad+fan there in between, reverse the water flow (going to CPU first instead of GPU first). It's gonna be crampy, but the temps should be much nicer
Excited to see a fully custom water loop including the new rtx 3080 in the loop xD
Need to get myself a 3080! Haha
No! Let's go for the 3090 overclock!
Would it of help if you would’ve used noctua slim fans?
What do you do with old builds?
I will gladly take one off your hands
Builds are not for him
Amazing Work , greetings from Germany
With future builds, how about showing the cable management. I know you talk about it, but would love to see it
This represents my bank account right now.
=0
Amazing build i like it :D
Great design...full support ❤️🔥
xspc tx240 ultra slim rad in the top and bottom with 92mm rad on the back
Just a question🖐️🖐️. Keeping the budget aside. If i want a gaming pc only for gaming and not streaming. It shd run all the games at the best quality smoothly. And obviously the cooling system shd be the most epic. How much would it cost. Can u please tell the price.🤔🤔
Depends if you're playing at what resolution you will be playing at
Having the bottom fans right up against the GPU, is that to help card sag? lol
I have a question. What do you do with the PCs you build in your videos? Do you sell them to a client? do you disassemble them and sell the parts? or do you just leave them laying around in your office? I always wondered what happens to these monster systems UA-camrs build
I'm pretty sure mose of the PCs he builds on the channel are for clients. Don't quote me on that though haha I could be wrong.
Would some slim 120 fans help with the airflow under the GPU block?
Would you really trust a single 240 to keep up with a 10700K and a 2080 super? 240 and a 280?
Can you give a list of the amount of fittings?
Looks good, but a single radiator??
böyle bir cihazımın olmasını çok istertim ama ne yazikki almamız mümkün değil mükemmel bir şey
Hey.. have you ever tried to use rog strix z490i with ek quantum velocity block?
Slim fans and maybe even a slim rad possibly could have helped with the clearance issue. Probably would have had to give up the RGB though which would be disappointing
Did you manage to close the case? Looks like the aorus GPU waterblock inlet/outlet extends beyond the width of the case
What is the bolt connecting between the reservoir and the pump?
Hi, Watercooling noob here. Could you not turn the case upside-down so that the fans exhaust the heat upwards?
thanks for the amazing tutorial I will have to build it
You are a genius 👌🏼
You are =)
Is 240mm the biggest rad that fits in this case?
Nobody
IFR:
of cours we fill a costum hardtubeloop in this case. : )
I'm new to water cooling. How did he color the liquid to that color?
Did you switch out both drives to WD Blue. You had a Seagate Firecuda in the back, but it switched to the WD Blue. Was there a reason?
Im lookin to build my first custom loop, but its so damn expensive, and realy ai think I should upgrade from a gtx 1070 before watercooling it
Same Problem
Same GPU
Same poor
It can be pricey. But just like getting a high refresh rate monitor for the first time, once you try it out, there's no going back.
I have this mobo with a 10700k, works great. My case is a lot, lot bigger though.
Any info on noise level and temperatures?
do a dual rad custom loop in NR200 pls
I loved the purple fluid really looks good on the build
nice one awesome work
hello sir! good job! that looked pretty tight! i dont know what kind of fittings are there available to buy! but i think that if there s any straight fitting (male thread x female compression) i see at least 3 cases that could have been used and it would save you 5 elbow fittings and if im not wrong i can see one of those fittings on ur radiator.. i understand that u might have to make the offset from the cpu block to the reservoir cuz the block might be slightly higher than the reservoir if there s any 16 bent fitting prolly could have worked..thats a plumbers prospective :D any way good job again for fitting all this in such a small case!
Wish hardware prices in India were lower
If there was no rgb with black fluid and fittings it would be a cool build
currently there are 13 unwanted children who disliked this.
18 now
25
32
40 now
make that 43
Sorry to be that one guy, but I think those are airflow fans on the rad. They should be static pressure fans right?
Does the Glass Side Panel still fit after thus build?
You guys inspired me so much
Please tell me the matterials
IFR pls make a tutorial video on how to do custom water loop with all cable routing
How do you drain it, or where would you put a drain port?
Amazing build but just killed by the smallest oversight, GPU cables.
dual rad would improve the thermals by quite a bit
Cant wait for 3080 watercooled build.
Can you fit more than radiator?
Top work as per usual my friend, tiny build that... have you ever thought of using a BLACK liquid in a certain colour build? Would be amazing I'd have though with the right case and connections etc?
do you think Corsair Hydro X Series XD3 will fit in this case?
Is this smaller than the Lian li tu 150?
Welcome back to another episode of You Can’t Afford this!
LOVE THE NEW MUCIC
Does the hardline count if the case is so small that’s it’s all fittings?
Well it’s certainly not soft tubing so yeah I guess
How reliable is that PSU? I’ve heard nothing but good about it but figured I’d ask an expert
Nice build
Whats the word on coolermasters 750watt psu?