Good day, hope I can pick your brain. With my 360 as I'm trying to spool up in Normal mode of course, sometimes it just won't move it just jiggles. It's like something is holding the motor from spooling up. Then for whatever reason it finally gets going. I know it's not battery related. I even noticed the belt for the tail rotor was a little tight so I adjusted that. Once it does get going and I fly the motor seems hotter than it should be but I'm not learned enough to say man that's too hot. So I'm asking if you know why the motor could be fighting just to get turning am I missing something and is it possible that the motor may just be dying? My level of 3d you could say is VERY mild so I don't think I could actually overfly this heli' yes I can flip it but not to any extent to kill a motor. What motor would you replace that 3400kv motor with if you had too? Thanks in advance.
Hello! So that is normal. It is the governor part of the ESC and a very slow spool up. You can go into the ESC settings depending on your radio and adjust it out. On mine I just advance the collective/throttle and let it spoil up. On my fusion 180 I turned up the spool of time so it was faster but sometimes it tries to spin around on itself LOL
I just got mine, did the templet on the nx8. Spun it up and it has a really bad vibration, and the blades are make a whipping sound at just a hover. I'm used to smaller helicopters like the m2 v2. So I'm not sure if the whipping sound is normal. Looked over the blades and they're not cracked. Going to try and turn up the normal head speed to 70, but I shouldn't have to do that. Any ideas?
so no that is not normal. First thing I would do is make sure blades are balanced. Also make sure you have zero pitch at mid stick on the blades. you will need a pitch gauge. something is definitely not right. it should be a smooth spool up no matter the head speed.
Thanks buddy! Honestly by far my favorite blade helicopter. It is just almost perfect! If it was success it would be absolutely perfect in my book. But they do make an upgrade!
@@westhobbiesrc8051 I heard the 480 is a little nicer but I'm sure I'll be happy with it.i fly the hell out of that 180 learning to pirro flip a little better,,it's a good feeling for sure,,I do really enjoy the blades . little too much
@@jakelang4387 the fusion 480 is a beast! I want to build one of those next! Piro flips are fun! I need to practice mine some more! I like my blade helis as well!
Not at all, I’ve got around 150 flights on this heli now, (not a whole lot but a good bit) all stock still flying great. I’ll be posting a new video on it soon!
Both great heli, The S2 is much smaller then the Fusion 360. I would compare the 360 to the Goosky RS4. For practice and beating around I like the S2 more but for visibility the 360 is better as it’s bigger. Both models are great and you can’t go wrong with either one. The S2 is a whole lot cheaper to crash as well.
Oh man what a beautiful heli. I want it soooo bad but i just ordered the a motor and esc with nx10 ( went 12s btw) and the logo 600 seems like the one i will get but I’m waiting to try my friends piuma maybe I’ll switch to it
Man it well worth it! Such a fantastic heli! My favorite blade heli so far! It would be the ultimate 450 class heli on 6s! 12s on that 600 will be a beast! I’m about to start a build series on the piuma!
The piuma is a great heli. Just a little bigger then the logo 600. I wouldn't go 6s with the piuma, it'll eat lipos, with 12s it's a beast. I have the raw 580 and it's a absolute blast.
Hello, i wonder what will be your opinion if speak of comparison between this Fusion 360 and T-rex 470L? Recently i discovered this model for myself and one big plus is that it comes assembled already, i just can put my receiver with FBL and fly. But in some other videos i heard that it's crash resistance is pretty weak, someone got bent shaft or grip after not so hard crash, someone else said servo gear can be broken very easy as well. When i watched 470L videos i didn't hear much about servo or shaft / grip shaft damage. Also, do both Fusion 360 and T-rex 470L feel similar in a flight or one of them is better?
Mine just constantly flys backwards as soon as it comes off the ground. Not a drift its like its at full reverse. I've tried everything I can think of to get it to stop with no luck.
First thing, is swashplate level? That sounds like the elevator servo is not 90° and you have back at zero stick. First thing I would do is make sure all three servos are 90° and swashplate is dead level with zero pitch at mid stick.
It’s honestly a fantastic helicopter! It would be really good for you especially with learning what stability mode and bail out it is the perfect size to learn on board HONNE your skills in with.
@@westhobbiesrc8051 How does the bailout work? If its inverted and bailout switch is hit, will it turn upside down and climb till you have time to recover?
@@shezadhamid1590 yes bailout will level you off and add positive pitch for as long as it is flipped. So if you are inverted and you flip bail out it will automatically roll the helicopter back over and add pitch.
I'd like to see a video on 4s
Soon! 😉
Hey mate, can the spektrum 6250hx fbl that comes with fusion 360 be transplanted into other helis or is it hard coded for the 360 only ?
Nice flying as always, better flying heli then my original 360cfx
Thank you! The fusion 360 smart is amazing! So locked and tight and just flys like a extension of your fingers!
Nice flying, thanks for this 👍👍
Good day, hope I can pick your brain. With my 360 as I'm trying to spool up in Normal mode of course, sometimes it just won't move it just jiggles. It's like something is holding the motor from spooling up. Then for whatever reason it finally gets going. I know it's not battery related. I even noticed the belt for the tail rotor was a little tight so I adjusted that. Once it does get going and I fly the motor seems hotter than it should be but I'm not learned enough to say man that's too hot.
So I'm asking if you know why the motor could be fighting just to get turning am I missing something and is it possible that the motor may just be dying? My level of 3d you could say is VERY mild so I don't think I could actually overfly this heli' yes I can flip it but not to any extent to kill a motor. What motor would you replace that 3400kv motor with if you had too?
Thanks in advance.
Hello! So that is normal. It is the governor part of the ESC and a very slow spool up. You can go into the ESC settings depending on your radio and adjust it out. On mine I just advance the collective/throttle and let it spoil up. On my fusion 180 I turned up the spool of time so it was faster but sometimes it tries to spin around on itself LOL
I just got mine, did the templet on the nx8. Spun it up and it has a really bad vibration, and the blades are make a whipping sound at just a hover. I'm used to smaller helicopters like the m2 v2. So I'm not sure if the whipping sound is normal. Looked over the blades and they're not cracked. Going to try and turn up the normal head speed to 70, but I shouldn't have to do that. Any ideas?
so no that is not normal. First thing I would do is make sure blades are balanced. Also make sure you have zero pitch at mid stick on the blades. you will need a pitch gauge. something is definitely not right. it should be a smooth spool up no matter the head speed.
They say it's pretty nice for the money,,nice flight Jeff .can't wait to get mine up and running
Thanks buddy! Honestly by far my favorite blade helicopter. It is just almost perfect! If it was success it would be absolutely perfect in my book. But they do make an upgrade!
@@westhobbiesrc8051 I heard the 480 is a little nicer but I'm sure I'll be happy with it.i fly the hell out of that 180 learning to pirro flip a little better,,it's a good feeling for sure,,I do really enjoy the blades . little too much
@@jakelang4387 the fusion 480 is a beast! I want to build one of those next! Piro flips are fun! I need to practice mine some more! I like my blade helis as well!
Any long term issues with this bird? I’ve heard it has some tail problems..
Not at all, I’ve got around 150 flights on this heli now, (not a whole lot but a good bit) all stock still flying great. I’ll be posting a new video on it soon!
Blade Fusion 360 or a goosky s2 ? what you like flying better ?
Both great heli, The S2 is much smaller then the Fusion 360. I would compare the 360 to the Goosky RS4. For practice and beating around I like the S2 more but for visibility the 360 is better as it’s bigger. Both models are great and you can’t go wrong with either one. The S2 is a whole lot cheaper to crash as well.
Oh man what a beautiful heli. I want it soooo bad but i just ordered the a motor and esc with nx10 ( went 12s btw) and the logo 600 seems like the one i will get but I’m waiting to try my friends piuma maybe I’ll switch to it
Man it well worth it! Such a fantastic heli! My favorite blade heli so far! It would be the ultimate 450 class heli on 6s! 12s on that 600 will be a beast! I’m about to start a build series on the piuma!
The piuma is a great heli. Just a little bigger then the logo 600.
I wouldn't go 6s with the piuma, it'll eat lipos, with 12s it's a beast.
I have the raw 580 and it's a absolute blast.
@@RubenRC94 yeah that’s the problem I can’t decide. And about the piuma I don’t think I’ll get it since i already have a 700
Hello, i wonder what will be your opinion if speak of comparison between this Fusion 360 and T-rex 470L? Recently i discovered this model for myself and one big plus is that it comes assembled already, i just can put my receiver with FBL and fly. But in some other videos i heard that it's crash resistance is pretty weak, someone got bent shaft or grip after not so hard crash, someone else said servo gear can be broken very easy as well. When i watched 470L videos i didn't hear much about servo or shaft / grip shaft damage. Also, do both Fusion 360 and T-rex 470L feel similar in a flight or one of them is better?
Hi,,,, What did you set your normal head speed / throttle to?
I used the template and an ix20… is the bail out switch the bind button?
Thx
Thx
Mine just constantly flys backwards as soon as it comes off the ground. Not a drift its like its at full reverse. I've tried everything I can think of to get it to stop with no luck.
First thing, is swashplate level? That sounds like the elevator servo is not 90° and you have back at zero stick. First thing I would do is make sure all three servos are 90° and swashplate is dead level with zero pitch at mid stick.
@@westhobbiesrc8051 thanks for the quick response. I'll give that a shot tomorrow.
@@calebkirk4218 anytime! Give that shot, servo has to be off or something is not level.
I want this helicopter but I am working on reverse upright circuits. I told myself no new helicopters till I get it down confidently
It’s honestly a fantastic helicopter! It would be really good for you especially with learning what stability mode and bail out it is the perfect size to learn on board HONNE your skills in with.
@@westhobbiesrc8051 How does the bailout work?
If its inverted and bailout switch is hit, will it turn upside down and climb till you have time to recover?
@@shezadhamid1590 yes bailout will level you off and add positive pitch for as long as it is flipped. So if you are inverted and you flip bail out it will automatically roll the helicopter back over and add pitch.
I just ordered one of these! I can’t wait to fly it!
Awesome! It’s a fun heli!
Hey I’m about to buy one what is your thoughts 9 months later??
@@mattk7794 i love it! Just don’t crash cause it’s breaks super easy lol
@@SlickBackAnt uggg I’m scared to 3D with it, on flight sim I’m good but idk how ilk get the nerve to do it irl
Great flight and heli 💯
Thank you! Hands down best blade helis so far!
Hi, question for you, is there a stability mode, self leveling?
Hello! Yes there is stability, self level. You will have to turn it on through forward programming. But super easy and simple!
Will it allow you to fly 3d in stability mode? Or does this mean pitch/roll limits?
@@mtb4maine stability mode will not allow 3D because stability mode will limit pitch/roll.