Wow muy bonitos. Al principio pensé que eran demasiadas burbujas y me extrañé de que no las quitaras, ahora veo que las burbujas eran parte del efecto que querias conseguir.
I sure wish this was filmed in landscape mode as I truly wanted to see all the beautiful work. On my equipment most of film was not in the viewing frame. Very pretty work though!
A new resin artist to subscribe to! 😊💕 Hello! 😊 You got some beautiful Petri effects in your pocket hugs! Don't you just love the dance of the inks in the resin? I could watch that all day...I really could. It's just mesmerizing! What resin did you use, and which sinker white? I hope you don't mind my asking? I've got both Let's Resin sinker white and Piñata sinker, but I'm always getting blobs on the front if I use the Piñata, and the inks don't go very deep if I use the LR sinker...oy! I'm about to fling in the towel on doing Petri art!
Hi awe thank you. It’s taken a while. I use let’s resin alcohol inks and I’ve been using JDiction resin and the sinker again is let’s resin here’s the link for you. LET'S RESIN White Alcohol Ink Set, White Alcohol Ink for Resin Each 100ml/3.5oz, Concentrated Alcohol-Based Resin Pigment, Alcohol Paint Dye for Epoxy Resin, Resin Petri Dish, Tumblers, Resin Art amzn.eu/d/gpvjHUG Keep going it will come, I also only do 1 layer and 1 drop of colour to 1 drop of white. Have fun x Sarah
@@wendygliddon3350 hi it’s had nothing mixed with it. I got my sinker from let’s resin White Alcohol Ink LET'S RESIN... www.amazon.co.uk/dp/B086XBTQVN?ref=ppx_pop_mob_ap_share
Please widen your lens view - most of what you did was done off to the side, out of view and the end results were also half hidden. I was so looking forward to seeing your results!
Yes this was one of my 1st videos. I’ve learnt a lot about filming and editing since my channel started. I shall do a new video when the weather here warms up a little😊
Wow muy bonitos. Al principio pensé que eran demasiadas burbujas y me extrañé de que no las quitaras, ahora veo que las burbujas eran parte del efecto que querias conseguir.
Absolutely BEAUTIFUL
I sure wish this was filmed in landscape mode as I truly wanted to see all the beautiful work. On my equipment most of film was not in the viewing frame. Very pretty work though!
@@evec.1933 yes I realised this and now due to a new grandchild in the house I don’t do resin at the moment🥰
These came out so pretty! Love them. ☺️
Gorgeous
Thanks
Beautiful!
Thank you 😊
Very pretty!
Thank you
Essa técnica é a mais linda da resina epoxi
Lindo demais
Wow you are so amazing I am going to subscribe and, just Wow..
Awe thank you 😊
Stunning 💞
@@toughtimes6596 thank you 🥰 I’m not able to create with resin at the moment due to little people at home.
Awesome❤
Hermosos❤
Thank you🥰
Newby subscriber here 👋! I'm a big fan of all Let's Resin products myself 😁✌️.
Hello thank you 😊 they are great 👍
Cuanto tiempo esperas para mezclar con el palillo❤?
@@nancyridi about 45 minutes to an hour if the room temperature is warmer it’s a quicker process😊
@@Mummabearscrafts4u gracias 🙂
7:51 woweeeewoweee
A solutely beautiful!!! How long do they take to harden.?❤
@@lindabracken4889 to remove from the mould 24hrs fully hardened 2/3 days depending on the resin used 😊
A new resin artist to subscribe to! 😊💕 Hello! 😊
You got some beautiful Petri effects in your pocket hugs! Don't you just love the dance of the inks in the resin? I could watch that all day...I really could. It's just mesmerizing!
What resin did you use, and which sinker white? I hope you don't mind my asking? I've got both Let's Resin sinker white and Piñata sinker, but I'm always getting blobs on the front if I use the Piñata, and the inks don't go very deep if I use the LR sinker...oy! I'm about to fling in the towel on doing Petri art!
Hi awe thank you. It’s taken a while. I use let’s resin alcohol inks and I’ve been using JDiction resin and the sinker again is let’s resin here’s the link for you.
LET'S RESIN White Alcohol Ink Set, White Alcohol Ink for Resin Each 100ml/3.5oz, Concentrated Alcohol-Based Resin Pigment, Alcohol Paint Dye for Epoxy Resin, Resin Petri Dish, Tumblers, Resin Art amzn.eu/d/gpvjHUG
Keep going it will come, I also only do 1 layer and 1 drop of colour to 1 drop of white. Have fun x Sarah
Magique❤❤❤❤❤
Thank you
Эффектно ❤🎉
Шикарные сердечки
большое спасибо
🎉beautiful 🎉😊new sub 😊
@@jojosmumdorothy2829 Thankyou
Very Nice,
You thinned your white with what? Please
Thank you. Isopropyl alcohol in the white. @DanielCooper did a video on it 😊
Ok i looked Daniel's video, i tried with 91% alcohol, didn't work. Did you use 99.9%?
@z1u2m3b4a5 yes 99.9% I use this for bubbles too. I have in a spray bottle😊
Where do you get your hug display to mount them on
I buy some off Etsy or I made my own too as I was making lots 🥰
What are these used for?
@@gurmitlamba205 I make them into keyrings or broaches/pendants or on a card with a sentiment verse as a pocket hug
How do you fasten the hearts onto the cards?
With a glue dot🥰
Question, the white, was that right out of the bottle as is or did you mix it with 99.9 alcohol?
@@wendygliddon3350 hi it’s had nothing mixed with it. I got my sinker from let’s resin White Alcohol Ink LET'S RESIN... www.amazon.co.uk/dp/B086XBTQVN?ref=ppx_pop_mob_ap_share
Where did you get your heart mold?
Hi I think it was from Resin Supplies Den over on Facebook 😊
Would this work with uv resin too?
I haven’t tried it but @Daniel..Cooper might have check out his channel
What is the white? Is that alcohol ink, too?
@@kristencrane3943 hello, it’s called a sinker ink, so it sinks the alcohol ink into the resin. The one I used was from let’s resin😊
@@Mummabearscrafts4u Thanks for the reply! I have some alcohol inks, but I've never heard of a sinker ink. Your work is lovely. :)
@@kristencrane3943 thank you, hope you have a go. 😊
How much do you sell your pocket hugs for?
£5 each
Please widen your lens view - most of what you did was done off to the side, out of view and the end results were also half hidden. I was so looking forward to seeing your results!
Hi thanks for your comment. Yes I’ve learnt a lot since this video. In this one I was asked to show the process and how the inks dance in the resin ❤
If that was me, I would have broken it. Ha haa 🤣
That was a nice video.
Катастрофа😮😮😮
@@АлексейТрубников-е9л I’m sorry I don’t understand what you have said
What i could see was nice however the filming made it difficult to see what you did
It was way to close up.
Yes this was one of my 1st videos. I’ve learnt a lot about filming and editing since my channel started. I shall do a new video when the weather here warms up a little😊