I just bought this battery pack roofing nailer, and used it today on a job. It worked great. I bought an additional two 6ah battery packs because l didn't feel the one that came with it was had enough operating life. (that cost an additional $180) so it's a $600 set up that would go about 10 squares without a battery charge with 3 battery packs. It's a little heavy, but with one 6ah battery l put on about 4 squares in about 3 hours. It's a little slower than air, but great for someone who's not super fast nailer. It can also be used to install concrete flooring board, for siding installing fan fold house wrap J channel steel bottom starter corner post (everythingbut nailing the siding on), great for 4 bundle valley repairs, 3 bundle redo chimney flashing jobs, 2 bundle pich break tear out repairs when doing a flat roof. I think every roofer should have at least one of them. Spend the extra $180 and get a longer lasting two 6ah battery packs. Time is money spend the $420 with tax for the nailer the $180 for the extra battery packs and you can save time and storage space. If your a roofer you got to have this nailer.
That sounds like it should also work. The main concern i can think of would be the weight, since folks already complain that this unit is heavy with the regular battery. But it may be worth looking into. Good Suggestion.
Man. Your voice is like movie star worthy. I’m looking at nail gun videos and like thought I was watching a universal movie reviewing nail guns. Great video
May end up picking one of these up for medium sized repairs and chimney repairs. I'll probably wait til price drops a bit. Also eager to see who else comes out with one to compete with this
I recnetly just got one off ebay with the full kit for only 289$ can't beat that honesly I'm never going to use my other nail gun again after using this one I have plenty of extra batteries to keep me busy plus a few chargers when they run out
Got jammed when it fired two nails at one time. I cleared the jam however the safety light comes on solid and the fan doesn't kick on anymore won't shoot nails won't do nothing but the solid light that comes on the back. Any ideas on how to reset it?
Do I need this gun if I'm not full-time roofer but want to help[ with roofing work from time to time using a good framing nailer. I appreciate your 2 cents about dropping it from the roof. Lol good to know about!
I would say it depends on if you are going to use it on big jobs or for repairs. I feel confident in recommending for repairs. For big jobs, only time will tell.
Honestly most guys have multiple batteries so don't see any issues there if it gets rid of hooking up compressor and hose. Just resheathed a 1500sq ft roof with the Dewalt 21° framing nailer. I'd do it again the same way just to have the freedom of no hose. Sadly I couldn't find this roofing gun to use on the shingles
I watched a while. I'll watch more later. 36 minutes is a long video for youtube. Just saying. I'm going to get one as soon as they are available. I wouldn't use it for a large roof, but for 10 sq, definitely. I do like your presentation, so far. They aren't available until September 29th, 2020.
They have restocked a few times, but they quickly sell out. This video is an unboxing demonstration and cost comparison between this tool, and a standard roofing setup. Regarding the length of this video: I guess I could have split this content into 2-3 videos, but decided to a make one comprehensive video. Cheers.
@@RENOS4PROSJOES Don't take my "length of video" the wrong way. I'm sure it's a good video and of appropriate length. As someone who has installed way more shingles than I ever wanted to, I just didn't need to see more. I thought the video was good. Looking back, I can see how my comment could be misunderstood. Keep up the good work.
My new one already broke where can I find how to fix video for this roofing gun please let me know I'm serious Please any one send me link how to fix dewalt wireless roofing gun please thanks
Hell no don’t buy this piece of junk. If you don’t trust me then go waste your time! I ended up returning this junk and used my hammer instead and I was way happier!!
I just bought this battery pack roofing nailer, and used it today on a job. It worked great. I bought an additional two 6ah battery packs because l didn't feel the one that came with it was had enough operating life. (that cost an additional $180) so it's a $600 set up that would go about 10 squares without a battery charge with 3 battery packs. It's a little heavy, but with one 6ah battery l put on about 4 squares in about 3 hours. It's a little slower than air, but great for someone who's not super fast nailer. It can also be used to install concrete flooring board, for siding installing fan fold house wrap J channel steel bottom starter corner post (everythingbut nailing the siding on), great for 4 bundle valley repairs, 3 bundle redo chimney flashing jobs, 2 bundle pich break tear out repairs when doing a flat roof. I think every roofer should have at least one of them. Spend the extra $180 and get a longer lasting two 6ah battery packs. Time is money spend the $420 with tax for the nailer the $180 for the extra battery packs and you can save time and storage space. If your a roofer you got to have this nailer.
You can use a flex volt battery, I use it on my framing gun.
That sounds like it should also work. The main concern i can think of would be the weight, since folks already complain that this unit is heavy with the regular battery. But it may be worth looking into. Good Suggestion.
First time coming across your videos man your voice is epic you should be in movies or voice overs in video games
Thank you for your kind words.
Man. Your voice is like movie star worthy. I’m looking at nail gun videos and like thought I was watching a universal movie reviewing nail guns. Great video
Thank you so much!
my tip. is to use the lock switch when setting it down. prevents that winding sound when tip is pressed down.
Good evening family. Thank you very much for the valuable information and for your time 🙏👍🏼👍🏼😉👌🏼🙏
Can I use this nailer to hold 3/8” thick plywood to the studs?
May end up picking one of these up for medium sized repairs and chimney repairs. I'll probably wait til price drops a bit. Also eager to see who else comes out with one to compete with this
I recnetly just got one off ebay with the full kit for only 289$ can't beat that honesly I'm never going to use my other nail gun again after using this one I have plenty of extra batteries to keep me busy plus a few chargers when they run out
Got jammed when it fired two nails at one time. I cleared the jam however the safety light comes on solid and the fan doesn't kick on anymore won't shoot nails won't do nothing but the solid light that comes on the back. Any ideas on how to reset it?
Good question, I got similar issues
Pull battery, reset firing pin with black lever on top
Perfect for Hardi board install. I’m sold
Maybe it's me, but I don't trust nails, screws only.
@sycomyk1 how did it work out for the hardie board?
How is it holding up for you? What nails did you use? Thank you
Can use those nails for fence purpose?
It’s hard to find it online wth
Just found your page. Had to subscribe and what. This video alone is well worth the time. Great information. Thanks.
Is this cordless nailer be good for doing fences?
It would probably work but screws are the way to go.
Do I need this gun if I'm not full-time roofer but want to help[ with roofing work from time to time using a good framing nailer. I appreciate your 2 cents about dropping it from the roof. Lol good to know about!
I would say it depends on if you are going to use it on big jobs or for repairs. I feel confident in recommending for repairs. For big jobs, only time will tell.
Honestly most guys have multiple batteries so don't see any issues there if it gets rid of hooking up compressor and hose. Just resheathed a 1500sq ft roof with the Dewalt 21° framing nailer. I'd do it again the same way just to have the freedom of no hose. Sadly I couldn't find this roofing gun to use on the shingles
Agreed. If you are someone that is already invested in Dewalt battery powered tool platform, I can see how this could be a no-brainer. Cheers!
My local home depot just started stocking them in limited quantities, might try looking there
My projects would go by so much faster with one of these lol 🤦🏽♀️. A great investment to make!!
Great video, thanks for posting. 👍
same could be said about the dewalt its charger and batterie can be used on other power tools just the same as air tools
Ещё работает? Как он спустя какое-то время?
I dunno what shingles you use, but the bundles are 70-100lbs... if they cant move the compressor they shouldn't be lifting bundles.
Agreed. But you can break a bundle down and move them in more manageable numbers. The compressor, not so much.
Can I use this to do wood fence project?
I don't believe these are the right type of nails.
Get electric dipped such as metabo exteriors and they will work fine, but screwing will always be best
1 3/4" roofing size nails max
How you gonna do a review on a roofing nailer without nailing a shingle
Hi as you know there is the manual method that was used for years just use a hammer for small jobs
I watched a while. I'll watch more later. 36 minutes is a long video for youtube. Just saying. I'm going to get one as soon as they are available. I wouldn't use it for a large roof, but for 10 sq, definitely. I do like your presentation, so far. They aren't available until September 29th, 2020.
They have restocked a few times, but they quickly sell out. This video is an unboxing demonstration and cost comparison between this tool, and a standard roofing setup. Regarding the length of this video: I guess I could have split this content into 2-3 videos, but decided to a make one comprehensive video. Cheers.
@@RENOS4PROSJOES Don't take my "length of video" the wrong way. I'm sure it's a good video and of appropriate length. As someone who has installed way more shingles than I ever wanted to, I just didn't need to see more.
I thought the video was good. Looking back, I can see how my comment could be misunderstood.
Keep up the good work.
Superslicktrick..... thanks
My new one already broke where can I find how to fix video for this roofing gun please let me know I'm serious
Please any one send me link how to fix dewalt wireless roofing gun please thanks
Dewalt offers 90 return no questions asked if you don't like return it....
Bare tool $330 when it comes to market
Hell no don’t buy this piece of junk. If you don’t trust me then go waste your time! I ended up returning this junk and used my hammer instead and I was way happier!!
Hi, why?
@@a.j.artist turns out he was using the nail gun as a hammer. He got it figured out now