cool video, I have 3 questions if you or someone would kind to help: what if garage f'oor is slopped towards a drain? will the epoxy run off the concrete ? what if you have repaired cracks, does the epoxy hide it all? what if your concrete is cracked heavily, and/or bucketed towards the the wall do you just use leveling cement and use epoxy?
Great job guys. Very professional video. Love how you showed how you repaired the pits of the concrete. A few things that maybe you could mention... How many mils is the epoxy applied? What's your formula of coverage for the flakes? Typically, we tell customers to figure the square footage divided by 9 for 1/4" flakes to get a full broadcast. Amazing, professional video fellows.
Wanna get a quote to do my garage floor asap. It is 398 square feet. I did the walls myself and it is done. Just need the floor done. I'm in Oakville. Please let me know how much and when it can be done. Thanks!
10-YEAR LIMITED WARRANTY Garage Living provides a 10-year limited warranty for every Floortex™ floor coating project we complete. You get a signed warranty certificate that includes the date of purchase and details of warranty coverage. We use only the highest grade industrial strength floor coatings that are guaranteed not to flake, peel, or blister. - excellent abrasion and impact resistance You can find more information here www.garageliving.com/products/garage-flooring/ or please use our contact form if you have any questions or comments about our products and services. We will respond to your message within 24 hours. www.garageliving.com/contact/
No your best bet would be to have a urethane cement done and then top coat with epoxy and broadcast with flake. urethane cement will hold a 15 ton dozer no problem, but price is massive. Best bet would be to install jack stands and coat around
I'm not sure where you got the $20k price tag. The installation cost varies depending on the size of the garage and the condition of the concrete floor. We do a lot of jobs where people did an epoxy floor themselves. In a couple of years these floors tend to peel and come up. The preparation of the floor is critical if it is going to last.
@@FunnyFixxd Good to know and I appreciate the reply! My garage/basement has the clear coat that the builder applied back in 92, and it's still pretty smooth. I just want to make sure that coating comes off.
LOL. I love how the home they showcase could easily have the home owners drop $10K into this level of professional job. This is out of the price range of the average home owner.
It's really not that expensive. I have gotten a few quotes from local companies and they both came in at around 4k for a 2 car garage. For a finish that will last over 20 years, id say that's quite fair
Yo hago metálico ,stain ,en epoxy hay muchas formas como hacerlo cuando lo haces con flex es super mas rápido porque el piso no nesecita mucho detallarlo
El chombo garcia me gustaria aprender hacer eso. Soy pintor y si e hecho varios pisos con buen productos y bien preparados pero no me quedan como el del video. Mucha gente me a preguntado si les puedo hacer el piso pero les digo q si quieren q quede como el del video mejor q le llamen a ellos
@@mitchellmontgomery7618 a mixing wand. Available at any home center/paint store. Applying poorly mixed product would be a nightmare for the crew and the client!
Ryan this is not true, a professional will mix with a wooden stir stick for 2 minutes to keep air bubbles from forming after application, mixing with a paddle mixer creates that vortex and mixes in a lot of air into the material.
Unless you want to buy a 500 pd grinder and elaborate vacuum system you cant do this yourself,the product, preparation and application process is why it is so good.
I used a sand blaster with a pull behind air compressor to do mine. Came out just as good but it was a lot of work for one person. And I had to drive to 4 different Home Depot’s to buy enough flake to get that kind of coverage.
@@head7502 I have a 26*24 and I used about 10 bags, I went with a slightly less dense coverage pattern. But still looks beautiful. I used a 2 part polyurea filler to fill the control joints. Results were spectacular. I put race deck over it.
Nice Video! I wish I could keep my work trailers as tidy as that truck!
Truly professional...... 🖒
.......to take money from your pocket
@@yournightmare9999 No shit, its a business not a flooring charity
Amazing video. Again nice work
Looks easy enough, will try it myself.
cool video, I have 3 questions if you or someone would kind to help:
what if garage f'oor is slopped towards a drain? will the epoxy run off the concrete ?
what if you have repaired cracks, does the epoxy hide it all?
what if your concrete is cracked heavily, and/or bucketed towards the the wall do you just use leveling cement and use epoxy?
Great job guys. Very professional video. Love how you showed how you repaired the pits of the concrete. A few things that maybe you could mention... How many mils is the epoxy applied? What's your formula of coverage for the flakes? Typically, we tell customers to figure the square footage divided by 9 for 1/4" flakes to get a full broadcast. Amazing, professional video fellows.
Wanna get a quote to do my garage floor asap. It is 398 square feet. I did the walls myself and it is done. Just need the floor done. I'm in Oakville.
Please let me know how much and when it can be done.
Thanks!
@@DontCryAboutIt how much did not cost you? Did you go with epoxy base/poly aspartic sealer or polyaspartic base and sealer?
Yo hago este trabajo
Usually, obviously depending on what kind of material you get and how much patching your floor needs, our company would charge around $8-15 a sq ft
whether Garage Living Toronto already exists in Indonesia ?
Sorry. North America only.
how strong is this? can i put jack stands on it without it denting or chipping?
10-YEAR LIMITED WARRANTY
Garage Living provides a 10-year limited warranty for every Floortex™ floor coating project we complete. You get a signed warranty certificate that includes the date of purchase and details of warranty coverage.
We use only the highest grade industrial strength floor coatings that are guaranteed not to flake, peel, or blister.
- excellent abrasion and impact resistance
You can find more information here www.garageliving.com/products/garage-flooring/
or please use our contact form if you have any questions or comments about our products and services.
We will respond to your message within 24 hours. www.garageliving.com/contact/
No your best bet would be to have a urethane cement done and then top coat with epoxy and broadcast with flake. urethane cement will hold a 15 ton dozer no problem, but price is massive. Best bet would be to install jack stands and coat around
Yes it would withstand that use. It's as tough as concrete so you'd be just fine. It is after all designed to be used in HD industrial buildingss
Yes.
That’s how you do it
, wheres the phil
Thanks for the info now I'll put you out of business
Good luck
Please video document the progress and results to really show'em up.
Lol recycled plastic chips and epoxy $20000 or amazon and do it yourself using an adhesive promoter under $300
I'm not sure where you got the $20k price tag. The installation cost varies depending on the size of the garage and the condition of the concrete floor. We do a lot of jobs where people did an epoxy floor themselves. In a couple of years these floors tend to peel and come up. The preparation of the floor is critical if it is going to last.
That being said and true, I seriously doubt this costs less than $10k so...still pretty up there in pocket pain
TorontoBuilder12345 and will fail wishing 6 months lol
TorontoBuilder12345 it costs from 2-5k for a 2 car garage depicting on the damage at least in socal
@@GarageLivingNA can u acid etch without grinding
I bet that installation costs over $100 !!
No way
Try 8000
@EL GEE How durable is it?
This application is $7 to $8 per square foot
100 per hour maybe 😂😂😂
Awesome...,, really great job.....
Where are you out of? I’m located in WESTCHESTER NY. THANKS
Why do people want this flake shit? I want solid color so I can find that washer I dropped.
why do you need a generator?
been doing shit like this for years. the Jobs r never that clean lol
Do you have to etch and degrease after you diamond grind?
@@ILC-eo6vk no you don't, just grind and have a powerful vac to clean it up. Pretty sure the vacs they were using didn't do shit l
@@FunnyFixxd Good to know and I appreciate the reply! My garage/basement has the clear coat that the builder applied back in 92, and it's still pretty smooth. I just want to make sure that coating comes off.
@@ILC-eo6vk Yeah no problem, Many times people have existing floors and we just grind over them
@@FunnyFixxd why would a Pulse bac vacuum not do shit? They cost $3,800.
This looks so satisfying 👌
LOL. I love how the home they showcase could easily have the home owners drop $10K into this level of professional job. This is out of the price range of the average home owner.
It's really not that expensive. I have gotten a few quotes from local companies and they both came in at around 4k for a 2 car garage. For a finish that will last over 20 years, id say that's quite fair
@@Picksix54 Can you tell me the name and contact of the companies? Thanks
It's an average of 6.50-7.50 a sqft for a job of this caliber. 10k, maybe for 2200 sqft.
Damn.
I want that products in my country Uganda
great video nice work
Hi. Do you teach courses in Florida?
where can I buy these products?
this is a great video. super helpful.
Do you use a normal squeegee or a serateted squeegee.
A normal squeegee works. We seal the floor along the base boards so you can use a hose to wash the floor and squeegee out the water.
π&unilDeepakKentGurgaon...
What states do you work in?
We are have 17 locations across the US. Visit @t to see if there is a location near you.
Where do you offer your services?
We are have 17 locations across the US. Visit @t to see if there is a location near you.
What about grout coat ??
Why should I do this?
excellent
Nice 👍👍👍
Woah! Nice.
Waw coollllll
Me encanta porque se gana un dinero rapido en 5 dias acabamos una clinica 💪💪💪
Cuanto se tardaria un garage de 2 carros? Una señora me dijo q terminaron 1 garage en un dia pero no le creo.
saul g hernandez si en un día se hace
saul g hernandez si yo solo graneo 1500 pies en un día y todavía puedo hacer una primera tirada
Yo hago metálico ,stain ,en epoxy hay muchas formas como hacerlo cuando lo haces con flex es super mas rápido porque el piso no nesecita mucho detallarlo
El chombo garcia me gustaria aprender hacer eso. Soy pintor y si e hecho varios pisos con buen productos y bien preparados pero no me quedan como el del video. Mucha gente me a preguntado si les puedo hacer el piso pero les digo q si quieren q quede como el del video mejor q le llamen a ellos
Nice job
Wow! Real pros! A+++++
Looks like it costs a small mint
Average 5-6 a sq ft
OMG, did I see someone mixing coatings with a wooden stir-stick?? Bruh! Not professional!!
Louis P. What should they mix it with instead?
@@mitchellmontgomery7618 a mixing wand. Available at any home center/paint store. Applying poorly mixed product would be a nightmare for the crew and the client!
Louis P.
Who the hell cares about the client?
@@Helmuesi911 Ummm. Most of us. Without the client we are nothing.
Ryan this is not true, a professional will mix with a wooden stir stick for 2 minutes to keep air bubbles from forming after application, mixing with a paddle mixer creates that vortex and mixes in a lot of air into the material.
How much is thism
Whos your supplier?
Awesome
Rich people stuff !!!
That looks beautiful! You don't have to etch or degrease after diamond grinding?
John Mooradian Of course not.
@@catlady8324 After I diamond grind, I may wash it with a degreaser.
Should you sand the flakes before you add the final top coat
Unless you want to buy a 500 pd grinder and elaborate vacuum system you cant do this yourself,the product, preparation and application process is why it is so good.
nonsense, you can rent a floor machine with a diamabrush abrasive disc for less than 100 dollars a day at HD.
I used a sand blaster with a pull behind air compressor to do mine. Came out just as good but it was a lot of work for one person. And I had to drive to 4 different Home Depot’s to buy enough flake to get that kind of coverage.
Head Assassin how many baggies of flake did you end up using? And how big is your garage?
Loose Cannon I used 28 1lb bags. Had about 3-4 left over after I sweep them up. It’s about 28x24.
@@head7502 I have a 26*24 and I used about 10 bags, I went with a slightly less dense coverage pattern. But still looks beautiful. I used a 2 part polyurea filler to fill the control joints. Results were spectacular. I put race deck over it.
And charge 10,
Wat is the cost for a standerd garage 6meter by 6meter
Wouter De Vos what’s the square footage
@@DontCryAboutIt that's expensive, having it done next week $5.50 square foot with polyaspartic top coat