Just ordered mine via Aquacave lastnight. This will be a nice upgrade. The video shows it can fit a standard 4 inch chamber...that means, this should fit my IM 20 Fusion system...i hope, or its going back.
@Redseafish I was told by Aquacave today and I also looked on BRS website, that there is a delay in getting this piece of equipment. I ordered mine 25 AUG with an anticipated 20 September shipping. The date got pushed two times, 24 September and Now it is saying Oct 4th...Please Don't be like the Neptune Trident NP....I canceled my order because they kept delaying and delaying after I preordered their Trident NP back in June.
Will it fit in the aio fijicube 20long media section? Its 4.4 x 3.4 … i know you say 4x4 . But the dimensions of the fleece roller say 2.4 x 2.6 .. i think i could make it fit lol
I just want to share my experience with the NanoMat. It easy really easy to install and mount it to the rear sump, but the problem is the trial and error part. It is really pain in the @s to hit the exact or perfect water level inorder for the NanoMat to be efficient. I do not have the ReefATO+ and just been using the stock ATO. And i noticed that they arei sadly not compatible. Why? Because when the Nanomat is working with the correct watrr level. The stock ATO adds water then the water level will be high again. With the NanoMat…it needs low water level to function. And what i observed on the return water chamber it is really low!! Even if you install the reefATO sensor it will not reach it…and still the nanomat is blinking all the time.. Red Sea should invent a part that could elevate the NanoMat itself more or something that could hold the NanoMat in place and people can adjust the hight of The Nanomat they want to get that perfect water level…im so sad.😢 The protein skimmer when place at the back will add more water level + returning water towards the NanoMat. I cant seem to get the perfect water level without the stock ATO. Even if i add the stock ATO, the valve is still higher than the desired water level thus it will add more water to the tank…pls red Sea do something!! Or am i the only one experiencing this…
You can adjust the float valve on the stock ATO to control the exact water height. The valve has a hinge that can be adjusted. Thank you for taking the time to comment.
@@Redseafish thank you! I will try it out. But i am still waiting for the perfect water level just by letting the eater evaporate to see how the it is in the return chamber…its really low now…
Looks like according to measurements provided it will fit in the first compartment. Will be getting and hoping it fits. Will update y'all on the results and if I have to return it or not.
I’m so disappointed in this. I really hoped that it was going to just be a smaller version of the existing ones. I like the physical design and idea. I just really hope that they are going to make a version that goes online and is just a smaller version of the original ones.
Well... that makes you the exception to the rule. ;) ever since we came out with the ReefMat series we have been flooded with requests to get smaller models, we launched the RM250 been a huge success and been asked for a NANO version and there it is, we are certain it will enjoy the same success and popularity.
@@Redseafish I disagree. The “little guys” think they need,,, wish they needed,, the same devices larger tanks with sumps have. It’s a fallacy, one they will regret or at least acknowledge privately that it was an unreasonably purchase. Change 1 2x3 piece of filter floss,, leave this expensive piece of plastic on the shelf. This is marketing to people with little tanks that have run out of things to spend money on.
Bought all Red Sea equipment. Wave and Pump both failed because of bad power supply within a few months. Red Sea not only refuses to honor warranty but does not allow me to post this on the facebook group. All I can say is: You screwed a loyal customer.
We are sorry to read about the issue. This is highly unlikely, your post is posted on the group since Sep. 6th 7:32PM UTC, and your warranty claim will be dealt with after the weekend Ticket #91749.
Just ordered mine via Aquacave lastnight. This will be a nice upgrade. The video shows it can fit a standard 4 inch chamber...that means, this should fit my IM 20 Fusion system...i hope, or its going back.
It does and you're going to love it.
Can you let me know if it fits your IM? I also have a IM 20 peninsula
@smithian4795 i will. It should arrive next week, since shipping should begin today accordingly to what's posted on Aquacave
@Redseafish I was told by Aquacave today and I also looked on BRS website, that there is a delay in getting this piece of equipment. I ordered mine 25 AUG with an anticipated 20 September shipping. The date got pushed two times, 24 September and Now it is saying Oct 4th...Please Don't be like the Neptune Trident NP....I canceled my order because they kept delaying and delaying after I preordered their Trident NP back in June.
@@Theaquaplex did you receive it?
Will it fit in the aio fijicube 20long media section? Its 4.4 x 3.4 … i know you say 4x4 . But the dimensions of the fleece roller say 2.4 x 2.6 .. i think i could make it fit lol
All we can do it publish the measurements. Let us know what you managed to do.
Looks good i wonder if it will fit my little cade
If it has a sump with a 4" sock, it can be dropped in using the adapter.
Red Sea does this hide behind the G2nano acrylic separator. Or will the dirty floss be visible
The motor unit will be slightly above (a few mm over) the glass screen.
Check out our FB group for actual pictures of how negligible it is.
Would any of your roller systems work with the Innovative Marine SR 80 AIO tanks?
If it has a sump you can make one of them work.
The NanoMat can fit in a 4" standard sock bracket.
I just want to share my experience with the NanoMat. It easy really easy to install and mount it to the rear sump, but the problem is the trial and error part. It is really pain in the @s to hit the exact or perfect water level inorder for the NanoMat to be efficient. I do not have the ReefATO+ and just been using the stock ATO. And i noticed that they arei sadly not compatible. Why? Because when the Nanomat is working with the correct watrr level. The stock ATO adds water then the water level will be high again. With the NanoMat…it needs low water level to function. And what i observed on the return water chamber it is really low!! Even if you install the reefATO sensor it will not reach it…and still the nanomat is blinking all the time..
Red Sea should invent a part that could elevate the NanoMat itself more or something that could hold the NanoMat in place and people can adjust the hight of The Nanomat they want to get that perfect water level…im so sad.😢
The protein skimmer when place at the back will add more water level + returning water towards the NanoMat. I cant seem to get the perfect water level without the stock ATO. Even if i add the stock ATO, the valve is still higher than the desired water level thus it will add more water to the tank…pls red Sea do something!! Or am i the only one experiencing this…
You can adjust the float valve on the stock ATO to control the exact water height.
The valve has a hinge that can be adjusted.
Thank you for taking the time to comment.
@@Redseafish thank you! I will try it out. But i am still waiting for the perfect water level just by letting the eater evaporate to see how the it is in the return chamber…its really low now…
I have the reef ato on my max nano G2 and I cant get the high water sensor to go off on my nanomat either.....
Can it be used on the : MAX NANO G2 Peninsula Aquarium (26 Gal)
Yes, All the G2 MAX models are compatible.
Will this fit in a Reefer 170 G1 sump?
It will fit into the sock holder with the adapter.
Will it fit in a waterbox 20 gal AIO?
i have also been asking this.. surely the filter sock section should be similar size
It can fit into a standard 4" sock holder.
@@Redseafishis that a yes or no?
Would love a definitive answer for this
Looks like according to measurements provided it will fit in the first compartment. Will be getting and hoping it fits. Will update y'all on the results and if I have to return it or not.
will this fit in a desktop cube ?
If it has a sump with a 4" sock, it can be dropped in using the adapter.
Are you going to make one of these that will fit your 25 gal Max Nano Desktop Peninsula?
All the G2 are compatible. The older MAX NANO\Desktop are not.
After I destroyed my sump to fit a 250, thanks
The 250 us awesome, don't feel bad, it's for the best.
So this will NOT fit in the Max Nano? Only the Max Nano G2 version?
Correct.
Will this fit a biocube?
If it has a sump with a 4" sock, it can be dropped in using the adapter.
Can I use it on my Max E260?
No, unfortunately it would not fit.
Dimensions of the filter chamber portion?
General 10X9X41cm; Lower filtration part 6X6.5X22cm.
Will WiFi be available someday as a firmware update?
Not in the near future.
Does it mean it has wifi chip inside?
from what i have read this isnt available on this model as to keep costs and size down
I’m so disappointed in this. I really hoped that it was going to just be a smaller version of the existing ones. I like the physical design and idea. I just really hope that they are going to make a version that goes online and is just a smaller version of the original ones.
Noted. Thank you for commenting.
Dear Red Sea, no we did not ask for this,, I’m not so incredibly lazy that I can’t change 1 piece of filter floss 1-2 times a week.
Well... that makes you the exception to the rule. ;)
ever since we came out with the ReefMat series we have been flooded with requests to get smaller models, we launched the RM250 been a huge success and been asked for a NANO version and there it is, we are certain it will enjoy the same success and popularity.
@@Redseafish I disagree. The “little guys” think they need,,, wish they needed,, the same devices larger tanks with sumps have. It’s a fallacy, one they will regret or at least acknowledge privately that it was an unreasonably purchase. Change 1 2x3 piece of filter floss,, leave this expensive piece of plastic on the shelf. This is marketing to people with little tanks that have run out of things to spend money on.
Bought all Red Sea equipment. Wave and Pump both failed because of bad power supply within a few months. Red Sea not only refuses to honor warranty but does not allow me to post this on the facebook group. All I can say is: You screwed a loyal customer.
We are sorry to read about the issue. This is highly unlikely, your post is posted on the group since Sep. 6th 7:32PM UTC, and your warranty claim will be dealt with after the weekend Ticket #91749.
Giveaways?
We usually do these things on our FB group. Join and stay updated.
Would this fit in a Fluval Evo 13?
If it has a sump with a 4" filter sock it can be dropped into the sock holder.