FIXING THE GAGGIA CLASSIC PRO | Gaggiuino Impressions
Вставка
- Опубліковано 20 чер 2024
- Checking out the Gaggiuino! This modification takes the Gaggia Classic, Gaggia Classic Pro, and many other machines to the next level. It solves a lot of typical machine pain points in espresso shot profiling and milk steaming on the Gaggia! Shoutouts to Riley for building one and walking through the entire process/experience.
Instagram: @brian.quan_
/ brian.quan_
Email: brianquanyt@gmail.com
Timestamps:
Intro 0:00
Walkthrough of the Gaggiuino 1:35
Is it worth building and what is needed 4:44
Is the Mod Easy to Build 9:25
Pulling Shots / Light Roasts (Blooming Espresso) 12:50
Steaming Milk 18:20
Pulling More Shots / Single Boiler (Londinium Lever Espresso) 23:20
Conclusions and Other Tidbits 28:10
Amazon Affiliate Links // Equipment List - Help me buy random gear (you do not need to purchase the products linked!)
NEAT Competition Glasses: amzn.to/42xO2B5
Timemore Black Mirror amzn.to/3KGnWEi
GDealer Scale: amzn.to/36X25Wn
Knockbox: Generic Knockbox amzn.to/33vGK8A
Cups: NotNeutral Vero + Lino amzn.to/39IcMBg
Airscape amzn.to/35bCtre
Coffee Gator Canister amzn.to/3aH44zy
Cafiza: amzn.to/2MAeauf
Thirdwave Water Espresso Profile: amzn.to/36S3TQM
BRIPE: amzn.to/3jtS9sZ
Filming Equipment:
Dji Osmo Pocket 3: amzn.to/47C0LFD
Dji Mic: amzn.to/44DgAda
Sutefoto P80: amzn.to/3rATCSz
Sony A7C: amzn.to/3HFpxsC
Sony A7IV: amzn.to/3AB5cm5
Sony ZV-1: amzn.to/3okAZ3k
Movo WMX-1: amzn.to/2TDkCnK
Synco M3: amzn.to/3pDQyFs
Synco G2: amzn.to/319ga3E
#coffee #espresso #espressomachine - Навчання та стиль
Yeee lets see ya build one now!
Awesome! I got a gaggia recently and have the gaggiuino kit on order. Can’t wait to get it
This is a great introduction to the gagguino, thank you so much, Riley and brian!
Love the video !! Thanks to you both for making it happen.
How would this compare to a standard Breville Dual Boiler just on shot quality ?
Super helpful video! What mods are on the DF64P? My DF64P can be pretty infuriating!
Thanks for sharing. I know coffee is a commitment but, I have not yet dipped my toes into mods. Well done! ❤☕☕
Could you do a follow up why Riley reccomends the Silvia over the classic ?
thx
I think it's cool that you still need to pull a shot by pressing the button. There's something satisfying about the tactile click of the switch amidst all the tech that's added onto the machine.
Can you provide a link to the steam wand?
This was awesome. IMO, the most comprehensive video on Gaggiuino out there. I just got my kit yesterday and I can't wait to install it.
I did this project and never had done anything like this before.. didn’t even know how to solder. Finished the entire project with just reading though all the documentation. Didn’t need to ask for help once and that’s not because I am Amazingh 😂. It’s because every question you have someone has asked it before. Fun project. Definitely recommend if you have a gaggia
Best value entry point to pressure profiling. I’ve used traditional scales (weightman) with mine so have not had to bother with hardware scales.
Loved the Video - Have a question for Riley, where can I get the ascaso wand that he used to mod the unit ??
Awesome overview of the Gaggiuino! I built mine this past month and I'm still learning and having fun messing with it. Community is great, as Riley said, but it definitely takes time and effort, which is worth it if you're into that sort of thing :)
Couple notes:
- There are two authorized PCB retailers now, and it is possible to get a kit with the pressure transducer, thermocouple, and a bunch of other things (so almost everything you actually need). Still takes a little while, but it's an option.
- I think the flashing steam light is just indicating that the boiler is currently heating
Hi ,can you put a link from where to buy the kit?Thank's
@@cipry27Peakcoffee. They're in the US, but ship overseas too.
Espressomachine galore over there! 😁
how did you do the ball rotating steam wand?
I just finished my KitchenAidiuino dual boiler. Still figuring out all the features, but it's been great! Just a note for anyone considering building a gaggiuino, it does not need to cost $1k USD. It can be done for a lot less than that with a used machine, carefully sourcing parts, etc. I think it can probably be done for less than some of the PID mods I've seen though.
Do you have any links to the kitchen aid build? I was just given a kitchen aid dual boiler and a gaggia. I got projects for a while now.
i want one of those kitchenaid machines sooooo baaadd lol
i gaggiuino'd a delonghi stilosa, nano, i modded the software to be touch screen start and stop brew and steam, and also has stop on weight and stop on time :)
Nice vid! What mods did you do on the grinder?
Check out the most recent stream on the channel! There's an entire section where the DF64 mods are gone over.
is there a link for a bigger screen diy
That not wiped steam wand gave me shivers! 😭🤷🏼
That’s the first thing that made you shiver?!
I didn’t see this in the comments. Can you link the steam wand? I couldn’t find it on Ferrari Espresso.
The blinking lights indicates the SSR turning on/off the boiler.
Got to purge that steam wand so its not so wet.
i dont quiet understand how you managed to pull a good shot with 2bar and 25s including pre infusion. Shouldnt it be more like 40s and 6 bar?
Brian. what a unusual picture~🤚
I understood Riley to say they spent $1k **in addition** to the cost of the Gaggia Classic. Then they mentioned $1k after that, so beyond the $200 just for the Gaggiuino, what was the extra $800 spent on? Can you (Brian) or Riley reply with a breakdown of the additional addons. Like $200 for steam wand (parts, links), $150 for external USB upgrade port on back, $…, etc. Thanks!
Pretty sure his math is off. You can get a full Gaggiuino kit for sub $200 with a kit and all. I know I paid $450 for mine new. Not sure how he spent $600 on upgrades
how to use this mod on a dual boiler machine?? is that even possible?
thx
Can’t
It's seems that grind was not fine enough and profiles didn't work properly. Actually blooming profile ended very quickly and blooming phase even didn't start.
Suprised the blooming espresso had a good taste. That was not close to how a blooming espresso profile should go. Also the londinium profile should hit 9 bars, that is needs a finer grind definetly. Futhermore it seems you are on a quite old version of the software. Apart from that nice vid!
Just wanted to say the same thing. For me the blooming espresso is kind of finicky, I have to have the grind size just right for it to actually do the profile so most of the time I just stick to the Londinium profile.
I’ll help you if you build it! Love mine
Gaggiuino so hot right now
Dude, literally.
Thank you for mentioning unauthorized sellers. It's so scummy to make money over the backs of people who actually put all the work in something for free!
Nah, they just pretend. They're getting a cut off of all PCBs ordered and I'm 99% sure they're making money on the kits being sold. They don't want others selling kits because it cuts into their own profits. If they were above board and transparent about everything, it might be different.
@@thomprd that's a hefty allegation. You got proof to back that claim up? By the way, if they even made a few cents off of it, wouldn't it be rightfully so that it ends in their pockets instead of the pocket of some lazy sleazeball that didn't do anything to contribute to all the time and money put into creating the code, 3D prints and testing parts?
@@bonbonbonfire we're all entitled to our own opinion.
Do you guys know where I can look for a pre owned/ pre built gaggiuino project for sale? I do not intend to support people building and selling this for commercial and profit purposes, just wondering if rhere is a channel where I can find pre owned at a fair price. Thanks
too much jerky motions with the camera is making it unwatchable. Compare that with when Brian is not the one holding the camera. Brian can you please make sure you're not over caffeinated when taking video? Thanks
I think it doesnt Matter. The information can be found in the conversation
Pedant