Such a great video and very informative. I'm currently waiting on my 12th floor props motherboard, and your review is what sold it to me. Can i ask where you got those aluminium cylinder spacers for the bottom of your alice frame ? Thanks in advance Dermot of Ghostbusters Dublin
I got mine ordered hopefully it gets here quickly. I've had an alice frame fail where it was drilled before with my spirit pack. I've put SO MUCH work and money into my haslab pack that I absolutely do not want to use that method to attach it. Retraining the halab mounting system is what sold me on it. My friend is in the 501st, and we talked about how Mandos almost never use the screen accurate mounting system for their jetpacks because they want something more robust. Completely how I feel about my pack.
Depending where they are on their run of making the motherboards you should get it fairly quickly. Their shipping is quite fast and I got the 2 of mine (ordered at different times) ahead of schedule. My pack isn't close to screen accurate anyways. It's my own personal preference accurate hahaha. Robust and longevity is my end goals.
@@SquadCollector I'm going accurate where I can but the mounting system is somewhere you're never gonna see for one, and it's something that I need to function for two. If a pack breaks on set, it's fine they have another. If MINE drops off the alice frame, it's over with.
I ordered one from Red Man a year ago. It was the first round, and I guess they didn't have the exchange rate/shipping figured, because 2 days later the price shot up to double. Got in under the wire, right? Nope. They held up shipping of my board for 8 months, and when I sent an email asking if it would be shipped by October, they decided to just cancel my order. This one seems just as expensive, but might have to go for it. I just do not trust those tiny little screw posts when I've added so much weight to the pack over time. Gah... pricey one, but I will likely just bite the bullet there. No one else makes a reasonable one!
Bellow was purchased from ETSY. www.etsy.com/ca/listing/1120206298/ghostbusters-proton-pack-metal-bellows?ga_order=most_relevant&ga_search_type=all&ga_view_type=gallery&ga_search_query=proton+pack+bellow&ref=sr_gallery-1-37&sca=1&content_source=52e8be3a1bc5b3072da3a3615f7e6914075eae41%253A1120206298&search_preloaded_img=1&organic_search_click=1 I helped him figure out how to get them to work with Haslab packs. Be warned it takes ages to arrive from Italy and it adds over a pound ot yoru pack hahaha!
Such a great video and very informative. I'm currently waiting on my 12th floor props motherboard, and your review is what sold it to me. Can i ask where you got those aluminium cylinder spacers for the bottom of your alice frame ?
Thanks in advance
Dermot of Ghostbusters Dublin
I got mine ordered hopefully it gets here quickly. I've had an alice frame fail where it was drilled before with my spirit pack. I've put SO MUCH work and money into my haslab pack that I absolutely do not want to use that method to attach it. Retraining the halab mounting system is what sold me on it.
My friend is in the 501st, and we talked about how Mandos almost never use the screen accurate mounting system for their jetpacks because they want something more robust. Completely how I feel about my pack.
Depending where they are on their run of making the motherboards you should get it fairly quickly. Their shipping is quite fast and I got the 2 of mine (ordered at different times) ahead of schedule. My pack isn't close to screen accurate anyways. It's my own personal preference accurate hahaha. Robust and longevity is my end goals.
@@SquadCollector I'm going accurate where I can but the mounting system is somewhere you're never gonna see for one, and it's something that I need to function for two. If a pack breaks on set, it's fine they have another. If MINE drops off the alice frame, it's over with.
@@Doctors_TARDIS I feel you man! If my haslab pack broke my heart will break with it :(
So you will no be using the two external speakers anymore on the new motherboard?
I will... but just for the wand.... I need to find time to get the 3.5mm jack installed.
@@SquadCollector ok thank you I thought maybe you would, have a great day 😊
Does the pack stand on it's own without the stand now the Alice frame sits lower?
It ALMOST does.... it's just a tad top heavy (That upgraded speaker) and makes it just tilt back enough to fall over :(
I ordered one from Red Man a year ago. It was the first round, and I guess they didn't have the exchange rate/shipping figured, because 2 days later the price shot up to double. Got in under the wire, right? Nope. They held up shipping of my board for 8 months, and when I sent an email asking if it would be shipped by October, they decided to just cancel my order.
This one seems just as expensive, but might have to go for it. I just do not trust those tiny little screw posts when I've added so much weight to the pack over time. Gah... pricey one, but I will likely just bite the bullet there. No one else makes a reasonable one!
Oh, it's half the price? Sold.
That's crazy! I guess all these companies have their horror stories... Just sucks to be the one on the receiving end. I feel for you brother!
RIGHT?! Very competitive!
Hi
Just a quick update.
We have 5 left on this run.
Many thanks Mark
12th Floor Movie Props
Loved your video and your pack! I love all you have done to it. Where did you get the bellows/shockmont? I would love to add that to mine.
Bellow was purchased from ETSY.
www.etsy.com/ca/listing/1120206298/ghostbusters-proton-pack-metal-bellows?ga_order=most_relevant&ga_search_type=all&ga_view_type=gallery&ga_search_query=proton+pack+bellow&ref=sr_gallery-1-37&sca=1&content_source=52e8be3a1bc5b3072da3a3615f7e6914075eae41%253A1120206298&search_preloaded_img=1&organic_search_click=1
I helped him figure out how to get them to work with Haslab packs.
Be warned it takes ages to arrive from Italy and it adds over a pound ot yoru pack hahaha!
@@SquadCollector Thank you so much!!