This is a great video, I would love to see more people doing things like this to give products a 2nd life. We live in a wasteful disposable society and I believe we have an obligation to reuse a product if at all possible.
I'm a Huge fan of your work, I love the way you present your restoration and it means a lot to us when we are in need of such DIY restorations. My only request is to see you restoring a Table Fan and making it run with 12v Bosch powertool Battery and an 895 DC motor, so that it could serve as an emergency fan in times of power outages who's is very important for fathers of small babies like me
I'm always amazed by your motor rewinding projects... That's not easy..... I was thinking near the end, "A better blade would help A LOT..." You got there in the end... Nice job....
Without doubt, the most creative & thoughtfully done video, viewed on Y/T today! Very skillfully & intelligently done, a tribute to ingenuity, and a lot of fun for this old TechnoNerd to watch! Thanks! 😁👍❗️
@@gear_show I like modifying things especially tools, yet the limited needed items become the problems; not all the necessary items are sold in my country.. 😓
Great job. An increase in motor size and a higher amp battery could really help turn up the RPM, but with a good blade it'll get the job done, just not as quickly. Very informative and I'm excited to see you using this tool in your future builds.
I've been watching it well every time.I would appreciate it if there was a video about the reason, principle, and method of solidifying the existing copper wire. Also, please make Korean subtitles possible.^^
Solidifying the wire keeps it from creating a short circuit. If it is allowed to move, vibrations will slowly wear away the coating. This is a common cause of failure in electric windings.
So nice to see you have a 3D printer must help a lot with projects when it pertains to restoring and reconfiguring stuff like this must be very useful!
For a trained guy, 10 minutes to an hour, if you're a total beginner it's going to take you hours and many ruined motors, practice a lot, there are no shortcuts to success :-)
Great video my friend I think u can make any thing battery power would u think u could make a air impact battery power or a electric push mower that would be cool keep up the good work
Hi! Another fascinating material. I like your content a lot. I wonder how do you know what gauge of the wire to use, how many turns etc. to change a motor from 110VAC to 18VDC. Is there any math formula for that? Could you please share some knowledge or give me a hint what should I look for in Google? Thanks
Hello domelodi, I just understand a little a bit about magnetic field. I followed the 24V armature structure. You can buy few DC armatures, disassembly them than you will learn something.
@@thestrangerthattalks9516 No, unfortunately this protection is implemented in the tool itself. if you connect a light bulb to a battery, it will discharge it to 0.
@@mraksnajper8683 I meant inside the battery pack itself, see how he makes his own lithium ion battery packs. There is always a BMS inside everytime he makes one
I notice you changed the field over to PM, rather than rewinding the existing stator. Was that for better speed control? Better efficiency? Or just so you'd have less rewinding to do?
Trust yourself, protect your eye, start it without cutting any wood, after you feel a bit confident try it with the wood. After a few times cutting, you will be confident.
I have a cordless 18v hedge trimmer. My friend took the battery apart and says it's too corroded, but the battery is discontinued. Is there a fix for this, Inn this channel or any other. I won't throw it away, I just need a battery. Thanks! That's in part why I love these videos, because things can be repaired if we only try.
Have a look at videos on UA-cam on how to convert your battery to 18650 battery,it's easy if you watch the videos and try for yourself,I done one for my 18v drill and works great,good luck.
U must buy those batteries in bulk I've noticed in a lot of these there unbranded lithium-ion or nimh type does that make them cheaper because there a no name brand?
if you would align the magnets better then you could achieve higher speed and better torque, I think you always just stick the magnets in, try it on a motor and turn the magnet cage while the rotor is turning
Beauty restoration and change to cordless but why put a garbage blade on it? A good diablo blade is super affordable, its the only blade i run on my circular saw, they last so long and have a nice thin kerf
![Cord to Cordless Circular Saw Conversion 220V to 20V [Rewinding]](http://i.ytimg.com/vi/k-L9mXOpwWA/mqdefault.jpg)
![Cord to Cordless Circular Saw Conversion 220V to 20V [Rewinding]](/img/tr.png)
This is a great video, I would love to see more people doing things like this to give products a 2nd life.
We live in a wasteful disposable society and I believe we have an obligation to reuse a product if at all possible.
At 15:14, the blade is installed backwards. At 15:16, it is magically swapped around! The magic of editing! Wonder how many other people noticed this.
Haha you are right :D
What you make with these old tools is awesome! Congrats!
Seeing your sweat drips from your chin as you rewind the rotor makes me appreciate your hard work. Keep it up and keep it coming.
You are an artist. I love your work.
I'm a Huge fan of your work, I love the way you present your restoration and it means a lot to us when we are in need of such DIY restorations.
My only request is to see you restoring a Table Fan and making it run with 12v Bosch powertool Battery and an 895 DC motor, so that it could serve as an emergency fan in times of power outages who's is very important for fathers of small babies like me
Я рад, что у Вас появился 3d-printer. Поздравляю с новым помощником в мастерской!
Да, это помогает мне много вещей
More RPM needed in this case, still love your show, great job!
Yes, thank you I think so.
@@gear_show Hey friend, I ran out of epoxy resin, can I apply polyester resin on a rotor windings instead? will it melt the enamel coating? Thanks!
I'm always amazed by your motor rewinding projects... That's not easy.....
I was thinking near the end, "A better blade would help A LOT..."
You got there in the end... Nice job....
Yes, thank you!
excellent job mr.gear I will also convert my damaged saw to cordless.
Yes, you should try it.
Wow, what a difference between disks. Great job!
Yes! Thank you!
Excelente restauracion y conversion de esta sierra circular eléctrica de 100 V a batería de 18 V, respetos desde Venezuela.
💯🤜🔥🤛👍🙏💯💯💯
¡Muchos gracias!
Điện máy giá rẻ Hùng thuận kính chào quý xị, mời các bạn vào mua sắm
Awesome❤ from india🇮🇳🇮🇳🇮🇳
Thank you!
Without doubt, the most creative & thoughtfully done video, viewed on Y/T today! Very skillfully & intelligently done, a tribute to ingenuity, and a lot of fun for this old TechnoNerd to watch! Thanks!
😁👍❗️
You're welcome, I'm glad you like it.
That's awesome, Mr. Gear..
I like watching you repairing or modifying power tools.. it looked easy yet required some good skills..
👍🏼👍🏼👍🏼👍🏼
Thank you for those who have dropped LIKE. I really appreciate it 🙏🏻
Thank you! I'm glad you like this kind of project.
@@gear_show I like modifying things especially tools, yet the limited needed items become the problems; not all the necessary items are sold in my country.. 😓
Great job. An increase in motor size and a higher amp battery could really help turn up the RPM, but with a good blade it'll get the job done, just not as quickly. Very informative and I'm excited to see you using this tool in your future builds.
I'm not yet satisfy this result, I should choose 0.8 mm coil for this rewinding. I will increase the RPM. Anyway, thank you for the tips.
Super great job. I like this 👍👍👍
Thank you very much
Hey Amigo los nuevos genios de hacer los mejores cambios de 120 voltios a solo 18 con baterías 🔋 felicitaciones 👏 Amigo .
Комментарий в поддержку канала и ролика, а также труда мастера отреставрировавшего.
Ottimo lavoro fratello, avanti così 👍👍👍
Grazie!
it's amazing
Thank you!
You become a expert in rewinding . 👌. This time u insulated armature . 👍
Love from India
Thank you!
Excellent
Thank you!
Brilliant a real pleasure to watch
Thank you!
Soooo much love from india
Thank you!
Good Very Good Work & Expert Technician. Instrument is Very good.
I've been watching it well every time.I would appreciate it if there was a video about the reason, principle, and method of solidifying the existing copper wire. Also, please make Korean subtitles possible.^^
This tool is 100V, while my country is 220V.
Solidifying the wire keeps it from creating a short circuit. If it is allowed to move, vibrations will slowly wear away the coating. This is a common cause of failure in electric windings.
@@gear_show dangerous voltage
Điện máy giá rẻ Hùng thuận kính chào quý xị, mời các bạn vào mua sắm
@@lcampm2 And dangerous 50 Herz.
When you upload a new video, I will laying down, and Watching your video 😂
Thank you so much for always waiting my video.
Excellent work👍👍👍. Thanks for sharing
Thank you 👍
Excellent work as ever.
Thank you!
Trabalho de mestre! Estou sendo seu discípulo e estou aprendendo muito. Gratidão Gear Show!
Ok, fico feliz que você tenha aprendido coisas novas
eline sağlık gardaşş işin gücün rast gitsin
Teşekkürler!
So nice to see you have a 3D printer must help a lot with projects when it pertains to restoring and reconfiguring stuff like this must be very useful!
Awesome videos. You should do a fan next for yourself. Must be hotter then heck wrapping those.✌️
Very good tutorial
watching late today 😆😆😆😆😆😆😆👍👍👍👍👍👍👍
Okay!
Better than factory original new blade made all the difference nice upgrade dude excellent posting :-)
I love you! Greetings from Buenos Aires, Argentina!
nice
Thank you!
Perfect. Extraordianery Method
Thank you!
Nice bro
Thank you!
Great job !
Thank you!
Wowww thanks you so much my request
Thank you!
great work 😎i swear makita tools best in the world
good job mister
Man, my patience would run out at about fifth turn with the motor rewinding. How long does it take to make 1 full rotor by hand? Great work as always!
For a trained guy, 10 minutes to an hour, if you're a total beginner it's going to take you hours and many ruined motors, practice a lot, there are no shortcuts to success :-)
@Eden M Yes, you're right.
@Eden M lol
Oooooooooooooooov
Perfeito 👏👏👏👏,ficaria visivelmente mais bonita com a bateria na parte de trás como as convencionais.
Obrigado!
Great job Gear! Can you convert a gas tool into an Electric One? That Will be a blast
Gas and electricity would definitely be a blast lol
Okay, thank you for the tip!
Great video 👍 👍 👍
Thank you!
Ur very good, i would definitly loose my self into this wiriing lol
Thank you!
fantastic job!
Genius 💪
Thank you!
Good job
Good job brother 😁😁😁
Nice video👍
Thank you!
Amazing video ✌️
I would really be impressed if you took your knowledge and applied it to an old ride on lawn mower!
Yes, that is an interesting project. I will try it someday. Thank you!
Điện máy giá rẻ Hùng thuận kính chào quý xị, mời các bạn vào mua sắm
Hung Thuan cheap electronics greets you, invite you to shop
Awesome❤️
Thank you!
Well done 👏🏼
Thank you 😁
thank you teacher
Awesome bro
Thanks 🤗
Nice 1 👍👍👍
You are great
Круто!!! Спасибо!!!
Пожалуйста! Спасибо!
Nice vdo all sir 👌
Great video my friend I think u can make any thing battery power would u think u could make a air impact battery power or a electric push mower that would be cool keep up the good work
Cool idea, thank you so much!
Komen ke 2 kang, di satu menit...
Thank you!
اعمالك رائعة أيها العبقري.
Thank you!
Belo trabalho, parabéns. 100 %.
Lindo trabalho parabéns 👌👌
Obrigado!
Amazing
Smooooooooth...
Hi! Another fascinating material. I like your content a lot. I wonder how do you know what gauge of the wire to use, how many turns etc. to change a motor from 110VAC to 18VDC. Is there any math formula for that? Could you please share some knowledge or give me a hint what should I look for in Google? Thanks
Hello domelodi, I just understand a little a bit about magnetic field. I followed the 24V armature structure. You can buy few DC armatures, disassembly them than you will learn something.
Hung Thuan cheap electronics greets you, invite you to shop
Great job !!! I already checked under your video - do you have deep discharge protection on your cordless instrument? Thank you!
I think the battery pack itself has a battery discharge protection
@@thestrangerthattalks9516 No, unfortunately this protection is implemented in the tool itself. if you connect a light bulb to a battery, it will discharge it to 0.
@@mraksnajper8683 I meant inside the battery pack itself, see how he makes his own lithium ion battery packs.
There is always a BMS inside everytime he makes one
Great job sir
How about instead of rewinding the armature change it with a 18 or 20v dc motor?
Could it work also?
Yes, you can use DC motor instead.
You did a very good job. May I know how to define 5 turns matching to 18V？
いつも動画で勉強させて頂いております
グリスは何をお使いでしょうか？リチウムグリス、モリブデングリス、など色々ありますが、、
リチウムグリースだと思います
@@gear_show お返事頂きありがとうございます！
❤️❤️❤️❤️❤️❤️
❤️❤️❤️❤️❤️❤️
nice just need to tweak the motor.battery location id put where the cord was
Veo que en la 2da oportunidad no olvidaste el aislamiento del enducido Amigo .
Great work . What the gauge of wire and the no of round before armature winding.
I notice you changed the field over to PM, rather than rewinding the existing stator. Was that for better speed control? Better efficiency? Or just so you'd have less rewinding to do?
The best❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤
can u make a video about proper safe handling of circular saw, I'm hesitating to use one for the first time.
Trust yourself, protect your eye, start it without cutting any wood, after you feel a bit confident try it with the wood. After a few times cutting, you will be confident.
Bueno, para cortar maderistas vale... Pero malamente.
Con mi Bosch de 1500 Guachs, corto todo.
18v 4Ah its powerful💪
😉wow～compact's‼️
👌👍
I have a cordless 18v hedge trimmer. My friend took the battery apart and says it's too corroded, but the battery is discontinued. Is there a fix for this, Inn this channel or any other. I won't throw it away, I just need a battery. Thanks! That's in part why I love these videos, because things can be repaired if we only try.
Have a look at videos on UA-cam on how to convert your battery to 18650 battery,it's easy if you watch the videos and try for yourself,I done one for my 18v drill and works great,good luck.
@@E-hab 👌
If you're difficult to find its battery, you can convert it to use with Makita battery 18V like I did ua-cam.com/video/tiQ-YcxaWCg/v-deo.html
👍😉
Khi chạy động cơ toả nhiệt cao thì phần nhựa in 3d nếu là nhựa pla sẽ chịu nhiệt rất kém và biến dạng.
U must buy those batteries in bulk I've noticed in a lot of these there unbranded lithium-ion or nimh type does that make them cheaper because there a no name brand?
hi Bro..Can you tellme what is inside , M&B, dock battery holder.....?
thank you
Хорошая работа👍 Но скорости не хватает...
Whats the white powder you use to clean the case parts.
if you would align the magnets better then you could achieve higher speed and better torque, I think you always just stick the magnets in, try it on a motor and turn the magnet cage while the rotor is turning
Okay, thank you for sharing your tips.
How much rpm is generated after you rewind like you did
Beauty restoration and change to cordless but why put a garbage blade on it? A good diablo blade is super affordable, its the only blade i run on my circular saw, they last so long and have a nice thin kerf
Có bằng công suất thực ban đầu không a, nếu mình không quấn lại ,thì dùng con motor 18v dòng nào là hợp lí a....😍😍😍👏👏
Hung Thuan cheap electronics greets you, invite you to shop