Vaillant boiler controls-no heating hot water
Вставка
- Опубліковано 26 жов 2020
- CAN I PLEASE ASK FOR EVERYONE TO SUBSCRIBE TO MY CHANNEL- I WOULD REALLY APPRECIATE YOUR SUPPORT.
The new VAILLANT ECOTEC (2012 onwards) have no user controls and replaced them with a single LCD display, with a series of scrolling menus.
This is not a user friendly control, and can be difficult to navigate through without the User Instructions booklet.
In this video I will show you how to adjust the temperature of the hot water, and radiators using the LCD display.
lowwaterpressure,#VaillantBolier,#Vaillant,#boilerleak,#lowwaterpressure,#waterpressure,#nohotware,#noheating,#hotwater,#heating,#centralheating,#radiator,radiatorwater,#removeradiator,#howtoremoveradiator,#howtostopgasleak,#howtostopboilerleak #plumberparts plumber parts
vaillant boiler vaillant boiler pressure too low vaillant boiler no hot water vaillant boiler how to turn on heating 1000 subscribers #vaillantbolier heat pump views low water pressure boiler noise combi boiler boiler leak.
#vaillant #heatingexperts #heatingsolutions #heatingpumpsystem #hotwaterbag #heater #boiler #boilerfix #boilers #boilerbreakdown
![ЛЕБЕДЕВ у ДУДЯ: муху не обманешь 😁 [Пародия]](http://i.ytimg.com/vi/E74h5fvVrqs/mqdefault.jpg)
Nice tutorial, I know nothing about plumbing systems, so today I have just learnt a lots from you. Thank you
Legend mate hot water had stopped running for a couple days and this seems to fix it. Thanks 👍🏽
Thanks buddy and happy it saved you paying a plumber coming out. Can I ask that you hit subscribe please just to support my channel 🙏🏻 thank you in advance and best of luck 👍🏻
Thanks for your advice and clear instructions.
You are welcome, if I could please ask to hit the subscribe channel to support my channel grow 🙏🏻
Thank you so much matey. You’re a gem.
I was able to have a hot shower after 2 days without hot water.
If you’re ever in north London let me know and I’ll buy you pints all night.
You’re instructions are so clear and easy to follow.
Many thanks
Tony
Thank you buddy much appreciated and Im happy you’re sorted. Can I please ask that you hit subscribe and the bell symbol, maybe share the video aswell. It would mean the world to me as Im trying to grow my channel and help others with same issues. Specially as winter is round the corner 🙏🏻🙏🏻
hi ..I just back after holidays so my boiler not working no hot water ...we freezing please tell us quick and short way
I have a few other videos if you check my channel. Good luck and don’t forget to subscribe 😊
@@fitnessEris hi mate I’m having so many issues with mine
@@ramzanhussain5676 hi Buddy- can you elaborate? Please don’t forget to hit subscribe. I would really appreciate it 🙏🏻
Thank you, was at work and our boiler is not working, but your video help me to reset it.
Thank you
You’re welcome 🙏🏻 please hit subscribe. It would help my channel alot 🙏🏻
Thank you sooo much this really solved my boiler issues.
Im glad 😃. Please hit the subscribe button . it would help my channel a lot. Good luck 🤞🏻
Finally I understand my boiler ,thank you .
Im glad it did. Can you please hit the subscribe button. It will help grow the community and my channel. Than you 😊
@@fitnessEris done 😁
Fantastic, thank you so much for sharing you skills with us.
I now have heat xx
You are welcome and Im glad that my video has helped you regain heating as I know how difficult and cold it can get when the temperatures suddenly drop. In return can i please ask that you hit the subscribe button, like and maybe share with friends and family that might also benefit from this in the future. It would mean so much for me and help my channel grow and reach and help more people like yourself around the world 🙏🏻🙌🏻. God bless , Merry XMass and Happy new year 😊
I found your video very helpful, thanks so much. But in winter when I want just warm water running through out the day and heating just when I am at home what do I do? Please help
I just fixed my water heating THANK YOU
@deloreswilliam thank you for watching and Im glad my video helped. Can I please ask for a bifg fav - if you could hit subscribe/follow button Please, would mean so much for my channel . God bless 🙌🏻
Thank you soo much saved me time and money
Thank you- I’m glad it did. Please subscribe so you have this video saved for next winter ( it would save you looking around if you have similar issues) It Would mean so much and help the community grow here as-well. God bless and all the best 🙏🏻👍🏻
Thanks for this video. When the Comfort is on does the On continue to flash please. Also, any reason why my sink is very hot and my shower only gets luke warm - they are positioned side by side in the bathroom.
Good video
Thanks mate helped loads
Please subscribe To my channel. Would mean alot 👍🏻
Thank you! It worked🎉
Im glad it did. Can you please hit the subscribe button. It will help grow the community and my channel. Than you 😊
Appreciate the vid man
You’re welcome . Please subscribe to the channel. Would mean alot 🙏🏻
@@fitnessEris have done pal 👍🏼
Thank you buddy 👍🏻
Amazing🔥😄Keep it up🔥 you got a Like from me...
Hi just watched your short clips on issues on the Vaillant boiler, my question is if you can kindly assist, that my boiler won't switch off at the thermostat which has just had new batteries in. It continues to run even when switched off from the boiler it self. Once turned on it again automatically runs the heating on. It's a pain as the boiler is not responding to my thermostat to turn off the heating and from the main switch off button either. What must it be?
Thank you for this useful video.
I hope you can help and advice me with my problems to have not warm water since yesterday if I took all the air of the radiators out. Before everything works perfect and I thought is time to take air out of the radiators. I also opened one of the radiators from one of my rooms on and after that the pressure from the warm water side is very very low and we don’t have warm water because of the low pressure. I also had to turn the heating off if I get warning sign and was scared to something happened. At the moment no heating and no warm water if the water pressure is very low from the heat side.
Please help and advise me what to to. I do have exactly the same Vaillant boiler as you show on this video.
Thank you
NZ
Pretty straight forward
Im glad it’s helped you. Would you mind subscribing please. It would help me massively 🙏🏻thank you
And thanks for this video😊
No problem glad to help. Can you please like share and subscribe video. Would mean the world to me and would spread out to help others in desperate need🙌🏻God bless
hi,great video thanks,what does the round button below the plus button do,its got a flame like symbol on it with a x going through it...
Hi, thanks for stopping by, that button is a restart button. You hold it dor 3seconds and it reignites the boiler. You usually do this if you have a fault showing on the screen. I hope this helps. Can I please ask that you hit the subscribe button fir me and share the link 🙏🏻 it would mean allot as Im trying to grow my UA-cam channel . Thanks again and let me know how you get on or have any issues 👍🏻
Good videos 👌
Thank you. Please subscribe 😁🙏🏻. Your support means allot
Hi, my heating is staying on during the night, even when timer is off and thermostat turned right down, is this anything to do with comfort zone?
Goode video
excellent
Please subscribe 🙏🏻
I have the Vaillant Eco Pro. Please could you explain how to switch it to summertime mode? I have subscribed. Many thanks in advance Gary
Thank you very much😅
Can I please ask that you hit the subscribe button. it would mean so much . All the best. God Bless :)
Why is it when I go away for 4 days (in summer) and switch off the hot water on my Danfuss timer, that my Vaillant boiler just wont work when I return (on a Friday night when I can't get an engineer until the following week meaning that I have to use the emersion heater which is now as expensive as a facelift ). Once upon a time I had an efficient boiler the size of a small Hifi speaker that never broke down, then it was replaced with a supposedly "more efficient boiler" that has an instruction book as thick as Radio Times - which spends its first pages telling you how wonderful it is - but which for a numbskull with mild dyslexia is as enthralling as a prostate examination. What ever happened to "ON" and "OFF". Is it a Government employment scheme???? Hopefully I will get the data here. Thank you for trying at least!
I have ecotec 637, pressure ws low so I builder pressure but the boiler does not heat up. Further more I do not have a tap sign on my boiler! Pls help
I need to know why my valliant boiler ignites, then cuts out. I would appreciate your advice please.
Hi I've got vaillant boiler, trying to get central heating working. Not heating up/temperature working. Water is working fine hot/cold both. Was working perfectly before just last 2 days. Its a ecoTEC pro 28. Thanks
thanks for the video but the honeywell wireless is not showing the heating flame symbol and the boiler is not heating the radiators any ideas please ?
I have got the same broiler, but the problem is uf I am putting traitors off, hot water also stop coming in taps. Please advise
...so I can put the heating off but hot water always on
Why do I have an egg timer flashing when I was trying to adjust the heating and water to winter setting?
very informative video but my issue is cant even here any pressure going anywhere while i was turning? it being absent for almost 3 days now.
If both valves are closed underneath (mains in and valve open) then would there be any other reason other than one or both are defective that is causing the pressure to elevate? he changed the expansion vessel - just wondering why it’s taking them 4-5 attempts?! thx 4 vids m8 btw! 😊👍
👍👍👍
Gd vid, how to pair rf neomitis with vaillant boiler and Siemens rwb 1007?
Hi - is there a way of turning on the heating without a wireless thermostat, so from the boiler itself manually? I used to have manual dials on my old boiler that I used to turn on my heating - how do I do that here?
I can't turn mine on to
Hi can I know how to turn off the radiator of Vaillant boiler?
My eco TEC plus 637 is showing
Flashing screen and saying low pressure.0.25bar
I managed to get the pressure up to 3.0 then shut the valve.
But it is still slowly climbing and got to 3.4!!!
I now have only radiators hot but not tap water.
Is this dangerous.
Great video. Please I need help. I had a power cut and after power restored, the heating stop working.
Hi, Im not sure about that to be honest. Have a look at my other boiler videos on my channel and see if they help. Follow it step by step. Please hit the subscribe and like button to support my channel aswell if that’s ok 🙏🏻
I subscribe
Ta bera subin ma kthe
Hi boiler flashing 04 how do I add water to system please ?
Hi thanks for the video! Might be a silly question but do you just leave your radiators on at 70-80 degrees during winter? With all my previous boilers I have been able to set a timer to choose when the heating turns on and off but I can't see a way to do that with the Valliant EcoTECH pro.
Hi, thanks for watching the vid, would you mind subscribing to the channel please and give me a thumbs up if the video has helped.
As per your question I usually control it on the thermostat but yes, I usually leave it at about 70 degrees on the boiler.
@@fitnessEris Hi thank you I have done! I've been looking a bit more into why my boiler isn't working properly. I have set the heating flow temperature to 70 degrees, however the heating only comes on very late at night and seemingly quite at random. I can't find a thermostat in the flat so am unsure how I am supposed to set the required heating flow temperature - there is no mention of this in the user manual for the boiler. Also, when I check the status of the boiler it says it is S.31 meaning it is in summer mode, but there is no icon on the display to indicate summer mode is on. The manual seems to suggest that to turn summer mode off you just have to increase the heating flow temperature, which I have already done. Do you have any advice?
Hi thanks for being so thoughtful in the current situation.I wonder if you could advise me on my valliant eco tec pro which has a separate thermostat its in the hall away from boiler in kitchen a child touched the settings I have it on manual the screen shows he1N above the word cylinder which is normal but im afraid to touch left dial- control as theres a whole menu and I dont want to loose heating Im quite worried as to what heIN means..Any advice would be welcome...!
Hi there. I honestly wouldn’t know if I can’t see it. But it might be worth switching it off at the mains “button on the wall near boiler” and back on. It sort of restarts it. I hope this helps. Can I please ask that you hit the subscribe button. Would mean so much for the community here and my channel reaching out to others with heating issues this winter 🙏🏻. Thank you -God bless
@@fitnessEris Hi Thankyou for your advice your response is welcome I did switched main off before to see if it reset itself Tried again even called Vaillant they sent a pdf it may as well be Chinese- it has everything apart from the answer to my question which is what word should be visible on thermostat above the word cylinder, im phased because when I turn setting knob It shows days, months, how long etc and as I said I have it on manual..Anyway thanks again..(subd)..x
Thank you buddy- Apologies I couldn’t be much help- I wish you all the best and hopefully Vaillant can sort something out. God bless 🙏🏻
@@fitnessEris Hi Thankyou for your kind message..🖐🖐
Hello my dear 3view
We just move to a new flat today and we have this broiler Im wondering what is the best temperature for heating?Thanks
Hi thank you for stopping by. I would recommend at about 75*C. Can I please ask that you hit the subscribe button 🙏🏻it would mean allot as I’m trying to grow my channel and help others as well with heating issues 🙏🏻thank you
@@fitnessEris thank you...done subscribing you...
One more question what water temperature should i set it?
Thank you for the support, I would suggest set it at the same temp as the heaters first and open the hot water tap and see if your happy with that set of temperature. If not than you could decide from there whether you want it higher or lower. I hope this helps. Let me know if you need anymore help. I have a few more boiler vids on my channel, they might help. Good luck 😊
do you know why the heating sign shows permanently on my boiler
Hi hot water on but can't get heating on the hard controller showing fire sing but it dose come on
COOOLLLLL
Just turned heating on, all looks good, hot water working but radiators are not tuning on. Any advice thanks.
Oh ok. It might be that they have been off for too long and need blidding. Its a special key that it requires to that. You can purchase it online. Please hit the Subscribe button to support to suppothe channel and the community 😁🙏🏻
Hi there, I have Vaillant boiler with same control panel (but is an ECOtec plus 637) I get no response from the left hand button and no image of the tap comes up. (Central heating control is all working fine) - nothing in the manual trouble shooting section. Any ideas?
There might be something wrong with the digital side of it to be honest if you’re not getting a response
Hi can I turn on my radiators from this control panel as I need my heating on and it only comes on sometimes.
@stuartramplin9265 - from here you can turn the temperature from low to high depending how hot you want them to get and then control your heaters from the thermostat or individually at the knob next to the heater. If they don’t come on, the heaters might need bleeding. Could i plesse ask if you can hit the subscribe button Sir- I would really appreciate it and it would mean so much. God bless and all the best 🙌🏻
Hi mate!My question is,if I have 2.7 bar on my boiler is ok ,or is to much ?I try to reduce at 2.2 bar but without success!Thank you !
Hi there.
Thanks for getting in touch-2.7 should be fine and shouldn’t have any issues.
Can I please ask that you hit the subscribe button and give it a thumbs up to support my channel- this would help others who is struggling with the same issues especially with winter around the corner 🙏🏻. All the best and thank you in advance.
How do I switch it back on?
I wanted to know how to switch only the hot water on. Not with the radiators at the same time. Can you help? Thank you very much.
Where the tap symbol is you need to increase the temp of the water and also check the pipes under the boiler if there is enough water flow going through. Please please hit the subscribe button. Would mean so much and thumbs up 😅. Thank you for watching and good luck
My heaters are not coming on, I have ecoTecpro28 ,valiant boiler
Hi, I’ve got a vaillant ecoTec pro and for the past week I haven’t had any heating. I replaced the boiler control screen but it won’t start up and it’s saying communication fault and it’s frozen on that. Please could you help!
Thank you for your comment. It looks like it might be a manufacturer fault. Try switching it off on the mains ( usually a button next to boiler on the wall) and turn on after 5 minutes.Meanwhile would you mind showing your support by hitting the subscribe button, it would mean allot and also check out the other boiler videos i have on my channel and let me know if its any help. Good luck 👍🏻
@@fitnessEris sure why not. It’s been like this for the past week with no hot water or heating, and I have already tried turning it off from the mains. After replacing the screen it kept coming up with a connection fault and now all of a sudden it started up and is heating but the fault is still on the screen and won’t let me change the temperature on the boiler.
@@haseebali3932 it might be a manufacturer issue. Maybe find their number online and give them a call and see what they say. Let me know how it goes if you do. Good luck 🤞🏻
@@fitnessEris Thank you for the help. I’ll call the manufacturer and see what they can do and I’ll be sure to let you know.
Mime doesnt show the tap icon (water ) so I cant adjust my water temperature . Does that mean that its faulty, Ive got exactly same boiler as in this video.
It might be, or it maybe a different version. I wouldn’t be able to advise if im not there unfortunately 😔
My boiler is not heating the radiators any ideas??
Ta bona sub
Might sound dumb but how do you actually switch the heating on/off
Please press the subscribe button it would help me alot 🙏🏻 to switch the boiler on and off, there shout be a switch on the wall next to it. If its just the heating you want off, you can do it from your thermostat.
@@fitnessEris thanks
Why does your boiler temperature stay on low 40s? Shouldn't it be running at a higher temperature... thanks for the vid
Thanks for watching Dan Gashi, may I ask you if you could kindly support my channel by hitting the subscribe button. Regarding the temperature I think the low 40s is enough to warm up the heaters and water as I have a small flat and also under 50 its energy efficient. I hope I have answered your question but please don’t hesitate to comment again if you have more questions and Ill be happy to assist. Happy new year 🥂🎉
@@fitnessEris
Thanks. I have subscribed!
The only reason I asked is because my boiler was running at 75 degrees and since I had my boiler service (yday) it has been sitting on around 53....
@@danarsenal5440 thank you 🙏🏻. That should be fine, as long as it doesn’t go in the high 50s and above
Urgent: How to turn on the heating manully on the boiler please? Mobile app is not working hence need a way to turn on the heating. Thanks.
Hi , Im not sure if you have but please subscribe and hit the bell. You will then see I have 2 more videos on my channel that might help with your heating issue. If you still experience problems. Please write back to me and let me know. Good luck and happy new year 🥂😊
i got hot water but no heating first time trying use it purchased a house had some new rads fitted boiling tap water no heating any clue?
Hi, Im not sure why that is. If you go to my channel. I have a few more videos on the same subject. Have a look and hopefully it will get resolved. Please don’t forget to hit the subscribe button, it would mean alot 🙏🏻
Can All please Subscribe to my channel for the support👍🏻✅
Does anyone know why a radiator flashes on the screen and a egg timer. I've had to turn the whole thing off as the pump was making a racket. Any ideas would be great. Thank you 🙂
Hi Lindy,
Have you tried doing a restart?
There should be a mains button on the wall. Switch it off and wait for 2 min than turn it on again.
Hope this helps.
Can I please ask for a big favour, that you subscribe to the video please 🙏🏻 thank you and good luck 🤞🏻
Thank you for your reply. That did work for a while then it packed up completely. Turned out to be the pump. That's the 3rd one 🥴 Have definitely subscribed 👍🏻🙂👍🏻
It’s the pump over run it does that so the boiler looses its heat into the heating system before going into standby, and if pump valve s noisy check the system pressure 1.5 cold system to rise up to 2-2.5 at hot running temps hope that helps
@@lindylou3050 If you have had three pumps the system water may be contaminated. There should be a magnetic filter on the return pipe to the boiler. If not one should be fitted plus system flush and inhibitor fluid installed. I hope that helps. A lot of “plumbers” do not service boilers as recommended. 🙃
I'm doing everything you've mentioned and I still can't seem to get any hot water
Hi there. Can I please ask that you hit the subscribe button it would support my channel so much 🙏🏻. Regarding the hot water, have you checked out my other videos as there might be a fault the boiler which you might need to alter.
How do you turn the heating on I can't figure it out hel me
Have you tried the procedure on my video? If you go on my channel there are a few other videos explaining the process. If not working- try switching it off at the mains and back on again- please subscribe 🙏🏻 would mean alot . Best of luck 🤞🏻
We don't have the radiator sign but we have the hot water
Hello
There is a hot water but no heating..
Thanks
For the heating side of it what should the bar be?
Should I just leave the bar alone?
Hi there. The bar should be just in the middle or just below the middle. Not at the top end as you may need to release pressure from the radiators with a special key. Hope this helps. Please if I could ask to hit the subscribe button on my page i would really appreciate it as it will help my channel reach others who are in desperate need aswell 🙏🏻God Bless
What ever happened to on & off hot & cold ?
Unfortunately they don’t make them as simple as that now( wish it was) . Hopefully the video has helped in some way. Can I please ask for your support by hitting the subscribe button and like. It would mean so much for the channel and community who might be experiencing the same issues🙏🏻. All the best 😊
My water starts off a little warm but then goes cold. The flame bar on the left whilst the water is on stays at level one. And the water stays ice cold.
How did u corrected it
Am also facing similar issues
Wery usefull for mentaly impared heating instalers !
Thank you so much. I really appreciate the positive feedback. Can i ask that you please hit the subscribe button, it would mean so much for my channel and the community that follow me🙏🏻. God Bless
URGENT: I just went to stick my heating on. Nothing.
The boiler is flashing a SPANNER symbol and that BAR symbol (at lowest point). I phoned Vaillant - something to do with pressure in the pipes?
(guy the phone said the braided metal pipe sat on floor of boiler cupboard should be FIXED to something).
Have text landlord, but does anybody know anything I can do? arrrrgh 😩
You might need to release the pressure , its a special key called bleeding key. Would you mind hitting the subscribe button for me please 🙏🏻
Just turn one of the keys in the pipes til u hear water start going into the pipes
Hi, I can't hot water but when click menu I can only see the radiator sign, plz can you help
Hi, was this sorted? What was the issue?
Same problem here!
Can anyone explain to me how to turn the heating ON I'm lost on this
You figured out now? 😂
It's not bringing up the menu option for me on hot water .. as I just had a new boiler installed monday but now have no hot water
In that case, they may need to come back as the menu for both hot water and heating should show up. Please subscribe and like 🙏🏻. Means alot. Best of luck and let me know how you get on👍🏻
My plus and minus buttons dont work when i am in the hot water or radiator screen
Hi there. Switch it off at the main button on the wall and leave it for 2 minutes. Than switch it back on. That should re-set the boiler. Hope ot helps. Can I please ask that you hit the subscribe button on my channel. It would mean so much to the community and people who are trying to solve the same problem this cold winter 🙏🏻. Good luck and God bless.
Hot to switch the heating off
Please subscribe 🙏🏻
Hi
Mine has no flame icon on the screen what do I do
Have you tried switching the boiler off at the main switch, leave it for 5 min and turn it on again? Can I please ask that you hot the subscribe button to my channel. Would mean so much 🙏🏻. Best of luck. God Bless
I’ve done all this but the radiators still aren’t warming up there’s no heat coming from there
Thanks for commenting. Have you tried bleeding your radiators? You would need a special tool for it! Can I please ask if you could subscribe and share if you found this helpful. Would mean so much for my channel 🙏🏻. Best of luck and God Bless.🙏🏻
Done your turn
The radiator cymbal is still flashing
Hard to see display on this video
Harry Styalea
Hi there’s no hot water but the boiler temp is fine
Have you checked the mains if they are open? Please subscribe 🙏🏻
Valient do not recommend a flow temp of 75° this is not at all a working efficiency for most combi boilers.
Bro just show us how to turn the hot water on if its not working
Its all there. Please see my other related videos which might help. Please don’t forget to subscribe 🙏🏻. Best of luck
It does not work, I just got mine today, I have no radiator and I have no gas signals on my screen. I have tap and radiator on the menu but that is all. So you are showing no one anything to be honest.
does anyone know how to actually turn the heating ON not just change the temp? i keep watching vids just telling me how to change temp but not actually to turn it on?
Can someone answer
Hi Laura, The heating should be turned on at the thermostat, if you don’t have one, check the knobs at each end of the heater and turn towards the plus sign. Can I please ask for a huge favour and hit the subscribe button. Would mean alot 🙏🏻. Good luck 😊
Hi, I replied to the question about how you turn the heating on, is this what you are referring to? Please subscribe to my channel it would mean alot 🙏🏻. Any questions please let me know and i will answer asap. Good luck 😊
I don’t have the tap cymbal so cannot adjust tap water temperature we have same boiler. Tap water far too hot engineer won’t tell us how to do it,
I would sugest rebooting the system by holding the round button under the screen with the flame button on it. If it still not showing, turn the boiler off at the mains and turn on again after a minute. Let me know if that restores it. Please also CAN YOU SUBSCRIBE TO MY CHANNEL AS IT WOULD SUPPORT ME ALLOT TO GROW ON UA-cam 🙏🏻🙏🏻🙏🏻 thank you and best of luck
@@fitnessEris I wish that had fixed it, still no tap cymbal?
@@Lostoldman That is really strange to be honest. Ill do some research and get back to you asap. I will also try and do another video on your issue so please subscribe and press the bell next to it to save my channel so you get the reminder soon as I upload the video 👍🏻
@@fitnessEris ok subscribed. Thank you very much.
@@fitnessEris i just been told its a vailant combi boiler. And the tap cimbal thing wont be on that model. Engineer adjusted tap water temperature near to the emersian heater just next to it inside the same flap.
I have F24 error
Brother y it is showing ( ! F 75)😅
Please subscribe. Your support Would mean alot🙏🏻
Can't see a thing
'no hot water' and you talked about 'readiators'
Hot water is fixed the same way. Please have a look into my channel. I have other videos that may help resolve your issue. Please subscribe. Would mean alot for my channel to grow. Best of luck 🙏🏻