I'm glad you changed the base for the engine it looked messy with all the leads showing the only thing I'd change would be USB charging for the batteries still excellent little project
I'll bet that unit would be a treat in a house with tall ceilings and still air! That's a nice alternative for those without the space nor funds to keep the full sized engines.
It's a beautiful engine, the base mod is perfect. I replaced all the pipes with copper pipe, and propper brass fittings to get rid of the ugly blue Pne fittings. The engine as supplied is great, but modification is the fun of the engine. Great Video AJ :)
Really ought to re-do the connections to the switch - without the wires being looped through the hole in the tabs, the vibration from the engine will likely cause the solder joint to eventually break.
Absolutely beautiful. I don't know why, but the Chinese have a nasty habit of fitting things the wrong way round! In this case the engines Flywheel. If you look at the curved spokes of Any stationary engine, like the Blackstones for example- the curved spokes of the flywheel ALWAYS are fitted so the spokes chop into the air the opposite way round!
@AJRestoration Yes, I had to look around to find one, and it did take a long time, but it was well worth the wait, especially for that price, I dropped lucky I was a bit miffed about two years ago when I found out that one of my neighbours had taken 3 stationery engine's to the scrap yard just a few day's before I had spoke to him and all of them were in working order what a great shame
Drop a proper pulley on it and drive a lineshaft of pulleys, to power Wilesco stationery mechanical candy. Sawing wood mobile, pumping well water mechanical all minds of fun stuff. Wilesco model steam.
Vackert men en del finns att förbättra,❤ men jag behöver inga miniatyrmotorer, jag har riktiga äkta stora flera stycken tändkulemoterer ca 12-15 st men den här lilla är frän👍
Seems to run pretty good but I would never accept a cast wheel that is crooked and wobbling like that. Totally unacceptable. Looks like whoever milled it was drunk as a skunk
unboxing vids are such garbage, If you want to show off a model; the contents of the box, JUST GET ON WITH IT!! Who really cares about the way something is packaged and unpackaged.
I'm glad you changed the base for the engine it looked messy with all the leads showing the only thing I'd change would be USB charging for the batteries still excellent little project
I agree its much better with all the wires tucked away.
Neat little machine! Nice job on the box to hide all the components, it looks great!
I'm glad you like it!
I'll bet that unit would be a treat in a house with tall ceilings and still air! That's a nice alternative for those without the space nor funds to keep the full sized engines.
Yes and these mill engines are really hard to find, and transport.
But it cant do a single job of work.
@@thra5herxb12snobody uses engines for work anyway, the electric motor is far superior, but we enjoy looking at these engines
@@thra5herxb12s It's a model!
It's a beautiful engine, the base mod is perfect. I replaced all the pipes with copper pipe, and propper brass fittings to get rid of the ugly blue Pne fittings. The engine as supplied is great, but modification is the fun of the engine. Great Video AJ :)
Nice little engine. I really like the box you made to keep all the ignition parts in order.
Glad you like it, the box does look better.
Nice little project kit. 👍
It sure is, I had a bunch of fun with it!
Very nice engine.. Thx for sharing A.J.
Thanks for watching!
@AJRestoration, I'm interested in buying this engine! What is the diameter of this engine flywheel? Thanks.
Ill get back to you, sorry I missed your comment.
Really ought to re-do the connections to the switch - without the wires being looped through the hole in the tabs, the vibration from the engine will likely cause the solder joint to eventually break.
Absolutely beautiful.
I don't know why, but the Chinese have a nasty habit of fitting things the wrong way round!
In this case the engines Flywheel.
If you look at the curved spokes of Any stationary engine, like the Blackstones for example- the curved spokes of the flywheel ALWAYS are fitted so the spokes chop into the air the opposite way round!
Congrats on 100k brother, amazing!!!
Thank you so much buddy, was a lot of work haha 😀
One ice cube keeps her cool for a while 😂
A really long while haha.
Great engine and great sound , almost like a Lanz Bulldog !
Where can I even get one of those?
Get the engine here
-14% Discount code: AJ14
- RETROL Engine ► bit.ly/3OBI0eF
- More Engine in Stirlingkit ►bit.ly/3Ozo1gx
That's cool!
Firing order of a small block engine
Hi love the little engine. Where did you find it .thanks
►Get the engine here
-14% Discount code: AJ14
- RETROL Engine ► bit.ly/3OBI0eF
- More Engine in Stirlingkit ►bit.ly/3Ozo1gx
Very nice
Thanks buddy!
Look at the wobble on that thing @ 12:01
I've just looked at the price of these models, and that's expensive it only cost me £180.00 for a real one that's roughly 240 us dollars
Where I am from the real thing roughly costs 2600 US dollars. Its really damn expensive, that is IF you can find one for sale.
@AJRestoration Yes, I had to look around to find one, and it did take a long time, but it was well worth the wait, especially for that price, I dropped lucky I was a bit miffed about two years ago when I found out that one of my neighbours had taken 3 stationery engine's to the scrap yard just a few day's before I had spoke to him and all of them were in working order what a great shame
Drop a proper pulley on it and drive a lineshaft of pulleys, to power Wilesco stationery mechanical candy. Sawing wood mobile, pumping well water mechanical all minds of fun stuff.
Wilesco model steam.
Your videos integrate ASMR into them. Enjoy it.
That's the plan! Glad you enjoy it!
Looks like the flywheel has a little runout. Otherwise nice.
What component is actually doing the loud clacking noise?
That is the cam actuating on the small roller bearings on the valve rockers, the cam has a agressive pitch causing the clacking noise.
deserves to be rebuilt tho. Some of the factory workers were actually really in lack of attention. even those pipings aren't lined up
Does it have enough power to drive a mini pump jack?
Is the piston water cooled. Is that what the metal hose on the bottom is for and the top one feeds back to the water holder at the back?
Yes the piston is water cooled. It has a small water pump for the coolant
Too beautiful really....
Thank you very much!
Amazing little invention. I'm not sure how you could put it to use but it does make pretty smoke rings! 😂
It seems you can make a little generator from it, other that that its purely a toy. I love the smoke rings haha.
Vackert men en del finns att förbättra,❤ men jag behöver inga miniatyrmotorer, jag har riktiga äkta stora flera stycken tändkulemoterer ca 12-15 st men den här lilla är frän👍
Spend $650 and get a wobbly flywheel and agressive cams that make a horrible noise - I don't think so!
Lots of room for improvement that flywheel would be on my lathe immediately and some work on the wiring layout and coolant lines.
If I had a lathe I would also give it some love.
Great 👍👍
Thank you 👍
Loveee it 😊😊😊😊😊❤❤❤
Looks a stylish and interesting engine at first glance, but the cross axis gears are out of line and the flywheel is either loose or poorly machined.
Where can I get one in kit form?. Brian.
Sadly they dot sell it in kit form yet but here is the link to pre built.
-14% Discount code: AJ14
- RETROL Mini Mill Engine ► bit.ly/3OBI0eF
Looks like the contents of the shipping box settled. Kinda like potato chips. For the minor assembly required, it could hardly be called a kit.
Cute, but $700??!!
Seems to run pretty good but I would never accept a cast wheel that is crooked and wobbling like that. Totally unacceptable. Looks like whoever milled it was drunk as a skunk
Firing order of a V8
O ja! Dat is handig als de elektriciteit in jou land kapot is
Absoluut!
were can i buy one
Pragtag AJ
Baie dankie Jan!
So how does it work?
Seriously. I don't see a source of heat as you would for, say, a classic Wilesco steam engine. But it seems to be putting out steam.
Its just an engine. Works like any other engine
@@dietznutz1 So it is an internal combustion engine running on what? Gasoline? Alcohol?
@frederickwilt5541 petrol with two stroke oil, it's just a different shape than other more conventional engines
Lot of mechanical noise, is it the water pump ?
❤
❤
Sorry, but some one tried to copy ny engine design Regards Finds Motor Denmark
Watch your fingers
Doesn’t look like it needs restoration.
Boleh kirim mesinnya ke sini mister. Pengen punya juga saya.
Sounds like it's running pretty good but what's causing the the big wheel wobble is it a bad casting or is it a bent crankshaft
The flywheel is not perfectly balanced.
@@AJRestorationc'est pas une question d'équilibrage ! 😅
Seriously!@@AJRestoration
Кайф ASMR👍🏻
Shame to that gasoline and not diesel
Batteries? No!
Too much aluminum.
unboxing vids are such garbage, If you want to show off a model; the contents of the box, JUST GET ON WITH IT!! Who really cares about the way something is packaged and unpackaged.
It is a way of showing people what to expect when buying this model. It is part of the experience.
Is anyone else tired of seeing these unboxings
Nope
then dont watch them
@@lucadoemarExactly
Nope
Rumor has it there are other UA-cam channels.
👍👍👍