Seems like you could if you have enough of the beads and a thermos of hot water. And maybe something to help with straight edges or the shaping of it. Happy Arting 🌹
Oh so smart! Thank you! I want to make squishies from my clay figures so this might be helpful to get there. I need to create very flexible, thin silicone molds of my figures and avoid the clunkyness of excess silicone that happens when you use a cup.
You didn’t state what you added to the silicone with the dropper at the 2:43 mark. I’m curious if it was an oil or just water. Thanks for the video and in advance for the answer. 🙂
This is a hardener (catalyst) for silicone. Liquid silicone for making molds consists of 2 elements, the silicone itself and the hardener. Silicone is always sold with the hardener in the kit.
I always make a secondary mold because silicone does have shelf life and molds get dull. I do this _immediately_ upon receiving the mold. I keep an original casting as well so I can remake the mold at any time. Of course, I have a functioning art studio with plenty of storage. The folks who do their art on their kitchen table (not a bad thing!) may not be so lucky, so I understand that. So, this is extremely good info.
Hahaha lol, I wish that would be PVA, coz the PVA is cheap but it's not, but it's very close to something like that. Anyway I tried my luck to make a Mold with PVA but it didn't work. Your work is awesome 👍🎉
Tenho um canal no UA-cam Desenvolvir bonecas de silicone apenas usando cola quente e fica original as do mercado, UAU !pra essa sua dica maravilhosa vai agregar muito valor aos meus projetos gratidão 🥰👏🏼
Problem with using thermoplastic like this (in pliable form) - it tends to pull back from a mold as it cools. Also, soft molds require pushing the plastic into finer details, which distorts the shape of the final piece. Obvious when you wrap an object with it, the cooled plastic will always be loose fitting. Thermoplastic is very useful, but has its limitations.
Materiales y herramientas: • Plástico caliente (polimorfo); • Vaso; • Agua caliente; • Modelo maestro y moldes; • Silicona para hacer moldes; • Yeso; • Tijeras y alicates.
Thank you! I had a favorite silicone mold split and wish I had a back up. This is perfect!
Yes!! Finally more thermoplastic ideas. Thanks :) I don't see a lot if videos using this awesome material.
Nunca lo oí nombrar. Es la primera vez que lo veo. Dónde se puede conseguir? para qué se lo usa?
So cool, so I could go to the old cemetery down the street and make a plastic mold of the carving on top and make plaster duplicates at home.
Seems like you could if you have enough of the beads and a thermos of hot water. And maybe something to help with straight edges or the shaping of it. Happy Arting 🌹
Bonjour.Super votre vidéo, mais cela aurait été bien d’avoir des liens pour pouvoir acheter le matériel de base!
Bonjour! Merci beaucoup! Je ne peux pas fournir de liens car j'achète le matériel dans un magasin local de ma ville.
@@DoasIDo1 C EST QUOI COMME PRODUIT POUR FAIRE LE MODELE AVANT DE PREPARER LE SILICONE MEERCI
Thanks! I’m in love with this idea.
Loved this. Thank you for sharing x ❤
Achei incrível. Tem algum video ensinando molde para vela palito?
Muito obrigado! Sim, há um vídeo: ua-cam.com/video/IoVhI9Hd5cw/v-deo.html
Love it thank you for sharing
Excellent hack! Thanks!
Genial! Gracias por compartir!
Gracias!
Фантастика!!!!!!!!Браво!!
Благодарю!
Que usa?
Thank you very much!
Oh so smart! Thank you! I want to make squishies from my clay figures so this might be helpful to get there. I need to create very flexible, thin silicone molds of my figures and avoid the clunkyness of excess silicone that happens when you use a cup.
Happy to help
Her yaptığının birbirinden güzel teşekür ederim
Lütfen!
Genial!!!!!❤❤❤❤❤👍 gracias por compartirlo!
¡Por favor!
Thank you 🤩❤️
Beautiful, The plastic comercial name please. Thanks
Thank you! POLYMORPHUSE or POLYCAPROLACTONE
Great content. A lot of love to you from the Beautiful Islands of Trinidad and Tobago 💞.
Thank you very much!
Superb!
Thank you!
Genial! Muy buen vídeo, y gran idea.
Tutorial sencillo, claro, conciso, no hace falta más! Me suscribo ^^
¡Muchas gracias!
Nice examples. Thanks.
You didn’t state what you added to the silicone with the dropper at the 2:43 mark. I’m curious if it was an oil or just water. Thanks for the video and in advance for the answer. 🙂
This is a hardener (catalyst) for silicone. Liquid silicone for making molds consists of 2 elements, the silicone itself and the hardener. Silicone is always sold with the hardener in the kit.
I like that. Thanks
Amazing ! Kisses from Brazil ! 👏🏻👏🏻👏🏻
Thank you very much!
Hola, cuánto tiempo se puede trabajar el plastico antes de que se endurezca de nuevo?
¡Hola! Puedes trabajar con él durante 7-10 minutos.
loved this idea/🙋♀
It was a great find !!! Thanks a lot
Que material es el que viene en forma granulado y le agregas Agua? Y queda transparente donde se puede conseguir?
aliexpress.ru/item/1005006981178029.html?sku_id=12000038927935070&spm=a2g2w.productlist.search_results.0.2d3b47f0FKsnu5
aliexpress.ru/item/1005006141117899.html?sku_id=12000035944074987&spm=a2g2w.productlist.search_results.1.2d3b47f0FKsnu5
Olá tudo bem? Onde acho para comprar, tem na Shopee?
Olá! Acho difícil responder sua pergunta
تجده عند تيمو
Thanks for this tutorial, this stuff is awesome!😀
You are welcome!
Best video ever, thank you
And thank you very much!
What was in the dropper that you put into the silicone?
Catalyst for silicone to start it hardening.
So mold a mold of a mold that was already molded ? Well molded, I mean noted.
I always make a secondary mold because silicone does have shelf life and molds get dull. I do this _immediately_ upon receiving the mold. I keep an original casting as well so I can remake the mold at any time. Of course, I have a functioning art studio with plenty of storage. The folks who do their art on their kitchen table (not a bad thing!) may not be so lucky, so I understand that. So, this is extremely good info.
also you can make 2 at one time too !
Cuz silicone mold is expensive, and for business you need more than 1 mold with same shape to make more products at same time
Therma was not melting in water ehy
Where to buy the hot plastic?
It is definitely on the Aliexpress marketplace
Instead of thermoplastic you can just use a gluegun with hot melt glue.
Wow 😮 that is amazing and I have subscribed to your channel today! Thank you for sharing! 😊
Thank you very much for subscribing!
Que material é feito essa peças ?
aliexpress.ru/item/1005006981178029.html?sku_id=12000038927935070&spm=a2g2w.productlist.search_results.1.2d3b47f05NP3LV
Hi, this is great 👍. Is this Polyvinyl Alcohol?
Hi, thank you! Honestly I don't know
Hahaha lol, I wish that would be PVA, coz the PVA is cheap but it's not, but it's very close to something like that. Anyway I tried my luck to make a Mold with PVA but it didn't work. Your work is awesome 👍🎉
Can you please tell us the curing time, how long did you unmold those?
@@IamAli89 unmolding as soon as it cools (turns white. You can run cold water on it to make it cool faster). So minutes, rather than hours
@@denicegirardeau7110 thanks :)
Tenho um canal no UA-cam Desenvolvir bonecas de silicone apenas usando cola quente e fica original as do mercado, UAU !pra essa sua dica maravilhosa vai agregar muito valor aos meus projetos gratidão 🥰👏🏼
Estou feliz por ter ajudado você!
La verdad es que está genial, pero al no estar explicando en latino o español cuesta entender. Gracias!!
¡Muchas gracias! Por favor activa los subtítulos, hay una traducción al español.
How and where thermoplastic can be obtain?
Amazon
Temu
You can find it on the Internet. Type in Google search "Buy thermoplastic and your city"
@@DoasIDo1 ok
Excellent!😊
Thank you!
Need to see how original mold was made.
What is the material that hot water is placed on?
Wow
ما اسم الماده التي خلطتها معه الماء الحار رجا ء المصطلح العلمي او التاري
بوليمورفوس أو بولي كابرولاكتون
@@DoasIDo1 شكرا وتحياتي
Gratidão ❤ , você me ajudou muito ❤
Fico contente em ajudar!
What were the beads made of ?
I don't know the correct name. Polymorphus or superplastic
Genial😍
Thank you!
Problem with using thermoplastic like this (in pliable form) - it tends to pull back from a mold as it cools. Also, soft molds require pushing the plastic into finer details, which distorts the shape of the final piece. Obvious when you wrap an object with it, the cooled plastic will always be loose fitting. Thermoplastic is very useful, but has its limitations.
It might have helped to follow if the thermoplastic mold was a different color then the silicon mold of the mold of the mold. All white hurt my brain!
There are color (beads) that can be mixed into the polybeads (when warm) to create different colors.
Magnifique
Thank you very much!
Ameiiiiii🥰
What is she mix with
With nothing. Just plastic and hot water.
ماهي المواد المستخدمه من فضلك
اللدائن الحرارية. بولي بلاستيك ... منه انواع ابحث علي جوجل و هتلاقيه
1. اللدائن الحرارية (البلاستيك الفائق أو متعدد الأشكال)
2. السيليكون السائل لصنع القوالب
3. الجص
Diga porfavor los materiales
Materiales y herramientas:
• Plástico caliente (polimorfo);
• Vaso;
• Agua caliente;
• Modelo maestro y moldes;
• Silicona para hacer moldes;
• Yeso;
• Tijeras y alicates.
если я не ошибаюсь, то это вещество называется ПОЛИМОРФУС или ПОЛИКАПРОЛАКТОН. Производитель-Китай
Да, все верно
Nunca vi. NEM existe aqui esse tal d termoplásticos.
Seu outro nome é Polymorphus
Who told you this was a hack or secret?
For many, this is a secret and a hack. You are not the only one watching the channel.
@ 🤣 not knowing about something especially something that is a known use of a product doesn’t make it a secret, it’s also a use not a hack.
Bitte in Deutsch
Untertitel einschalten
Thermoplastic costs more than the mold itself
100 grams of thermoplastic can be bought for 3-5 US dollars, you can find it even cheaper. This amount is enough to make 5-7 small molds.
and it is reusable