Saeco Pico Baristo Repair: Installing 2-Way Valve, Water Pump Replacement, and Grinder Cleaning

In this comprehensive video, we take you through the process of installing a new 2-way valve in the Saeco Pico Baristo espresso machine. Along the way, we provide insights into various components of the machine, including replacing the water pump and performing a thorough cleaning of the grinder. Watch as we carefully disassemble the machine, remove the old 2-way valve, and install the new one. We demonstrate step-by-step instructions and share valuable tips for a successful installation. With the water pump replaced and the grinder cleaned, the machine is now ready for optimal performance. Join us on this journey of espresso machine repair and maintenance with De Luca Espresso Repair! Don't forget to like, subscribe, and leave a comment to let us know your thoughts. Get your #SaecoPicoBaristo back in action! ☕️🔧
#EspressoMachineRepair #SaecoPicoBaristo #2WayValveReplacement #WaterPumpReplacement #GrinderCleaning #CoffeeMachineMaintenance #CoffeeLovers #HomeBarista #DeLucaEspressoRepair

[@denys-y6k]

hi, could you please write what were the symptoms, so you knew you need to change 2 way valve?

[@profightfit1750]

Thanks for the video and process, recently my Saeco Picobaristo constantly primes and when descaled and cleaned it will only dispense hot water through the Aux. spout, I triple checked all screws and have gotten to the point to remove the top of the unit as a whole, seems as though there is a plastic clip or hook that will not allow the top to be removed or budged, any help or any other place there is a screw or catch? Any tips on what it may be that is clogged? Thank you!

[@brianbenavidez4277]

Thanks for these videos! Are you familiar with how the machine detects whether it's grinding enough coffee? I have an issue with my Pico Baristo where it is constantly saying that I need to add coffee despite the hopper being full and I observe ground coffee coming out of the grounds spout by looking down the pre ground coffee compartment. I figure there is some sort of sensor that determines if enough grounds are present and that sensor must be blocked or dysfunctional. Your expertise is really appreciated!

[@justincaranfa3995]

Hello, thx for the video. Water is coming out of the hot water spout just fine but not the coffee dispenser. I replaced the water pump but still no coffee coming out. Grinding fine, and brew group unit seems to be moving properly and dropping ground coffee where it should go. Any other thoughts on how to get the water to come through the coffee?

[@veronicaholmes3706]

You mentioned in above video that the internal waterspouts get clogged. However, did not show how to clean the spouts. I am having the problem that the hot waterspout is working just fine but not dispensing coffee. Before I replace 2-way valve I want to see if that will solve my problem. Thank you for your help.

[@MrLinker13]

Hello thank you for the video

[@antonbee3724]

Thank you for your videos. Can you please advise on what to do with an Error code 5 ? Thank you

[@ydyd2207]

My picobaristo is leaking some water out of the hot water nozzle. What can be the problem and how can I fix this. Thank you