I see this. These panels and knuckles are fabulous looking. Unfortunately there was no such animal as Vitavon when I built this buggy. But FID is also top notch dbxl mtxl parts in my book. Thanks for checking out my buggy Bryan 👊🤘
Damn G! That thing is freakin beautiful! God I love carbon AND blue! I think you’re 100% right about some black washers! Man, it’s like groundhogs day over there brother… it was ten till twelve the entire video!
Thank you Todd! Arthur did such a killer job on these panels. Amazing craftsmanship. 😂 you noticed the clock🤣 !!! I took the battery out of it. Frigging tic tic tic tic got on my nerves with a swiftness lol
Right! Vitavon nailed these panels. Looks so much better in person too. Hard to see the carbon lines in video and pictures. Appreciate you stopping by 👊
Love that thing , a bit spendy , but so is Taylor stuff , I put castle creations in my dbxl , love that thing , but the new vesla beast I'd always taking everything's place these days , center cup is a must have on this truck for sure , very nice body thanx for the info , love the washers , maybe even white ones would look cool
Thank you so much man! It wasn't the cheapest body kit for sure. But man it looks fantastic. Hope it holds up cos it's getting used lol. Can't go wrong with Castle motors. I just barely put this one in at the same time as the Max4. Now of course HW has a 12S rated 800kv. I probably would have used that to try. White washer is a good thought. Would definitely stand out. Appreciate you stopping by 👊 🤘
What is up man! Thanks! The V1 dbxl-e body panels I still have. The two side panels have cracks up near the front wheels. I originally used shoo goo on them. Easily repairable. Up to you. Appreciate you stopping by 👊 🤘
Can you attach the old panel onto this so that you keep the design of the original? I mean using the fiber panels as reinforcement underneath the original panels? Thank you
Sup man! Not sure I really covered that tower to tower center brace. Yes I made it myself. Out of 1/2 inch 7075 aluminum solid rod. Cut to length. Drill and tap a hole in each end to bolt onto the shock towers. The front end needs a slight angle to it for tower fitnent. Then I drilled a hole in each aluminum tower to bolt the rod on. Really stiffens the chassis.
Thanks!!! The wheels and tires are Proline Badlands mx43 for the Xmaxx. I used a 3/4 inch step drill bit to make center hole big enough to fit 5th scale hexes. Appreciate you stopping by 👊 🤘
Hello. These panels are top notch. Look beautiful and fit perfectly. Very strong carbon fiber used. Very shiny smooth finish. Love the panels. Appreciate you stopping by 👊 🤘
I agree man! Absolutely love these panels. I actually got these panels to bash with. In grass I have rolled and crashed a few times. Doing well holding up great. On road or gravel it would be destroyed though. Really appreciate you stopping by 👊 🤘
Why does the nose look like it’s bent or misshaped? Thats not good for 350.00. Outside of that it looks absolutely gorgeous I have the red one on order.
@mikeguzmansr hello. I didn't notice the bend. It is a 7 year old RC that has been used and used. Maybe the cage is tweeked a little? I don't know. I can tell you that it went together super easy. I didn't have to pry to get screws in. I am not a big Vitavon fan either. Too expensive for what you get. FID is half the price and same quality. Hope you like your body panels bro. I love mine. Thanks for stopping by 👊🤘
Like a kid in a candy store! 🤣 Dude my FID front hubs broke. The little wing that the steering links connect to broke off and no parts available. I still need a motor also. Both my cars are down and out. Sad clown of life!
Well that sucks! Can you use stock steering knuckles till you get aluminum? I am just now putting thise Vitavon knuckles on. Years of plastic with no real issues. I have a Dynamite 800 kv motor brand new for sale. Lemme know.
Sweet man. 👍🏼👍🏼 Arthur and his gang make some very nice stuff.
I see this. These panels and knuckles are fabulous looking. Unfortunately there was no such animal as Vitavon when I built this buggy. But FID is also top notch dbxl mtxl parts in my book. Thanks for checking out my buggy Bryan 👊🤘
She’s looking really nice 👍🏼! That’s a great upgrade!!
Heck yeah! Thanks brother! I absolutely love this body.
@@SteelCityRC yea it’s definitely gorgeous
That's a gorgeous rig you put together there my friend. Thanks for sharing G-Man 👊😎👍🔥
Right on! Thanks man! She ie an old girl. But taken care of well. Loves 12S power lol. Thing is insane to drive.
Damn G! That thing is freakin beautiful! God I love carbon AND blue! I think you’re 100% right about some black washers! Man, it’s like groundhogs day over there brother… it was ten till twelve the entire video!
Thank you Todd! Arthur did such a killer job on these panels. Amazing craftsmanship. 😂 you noticed the clock🤣 !!! I took the battery out of it. Frigging tic tic tic tic got on my nerves with a swiftness lol
Man Gorley love it blue carbon fiber ❤🔥🔥🔥🔥😍😍🤩👍👊🏻
Absolutely! Me too brother! Thanks 👊🤘
Sup G'man 👊
What is up Robert!!!! 👊🤘
That body for the dbxl is top notch bro
Right! Vitavon nailed these panels. Looks so much better in person too. Hard to see the carbon lines in video and pictures. Appreciate you stopping by 👊
It looks very nice my friend 👍
Thanks for stopping by to check out my buggy 👊🤘
What a blessed DB, I don’t what mine to watch this video and leave for someone that can buy her nice things like this lol
😁😂 you got me dying!! Good one bro! Really appreciate you stopping by to check out my buggy 👊🤘
Love that thing , a bit spendy , but so is Taylor stuff , I put castle creations in my dbxl , love that thing , but the new vesla beast I'd always taking everything's place these days , center cup is a must have on this truck for sure , very nice body thanx for the info , love the washers , maybe even white ones would look cool
Thank you so much man! It wasn't the cheapest body kit for sure. But man it looks fantastic. Hope it holds up cos it's getting used lol. Can't go wrong with Castle motors. I just barely put this one in at the same time as the Max4. Now of course HW has a 12S rated 800kv. I probably would have used that to try. White washer is a good thought. Would definitely stand out. Appreciate you stopping by 👊 🤘
Sweet truck 👊👍
Thank you so much!! One of my all time favs. Appreciate you stopping by 👊 🤘
very nice. are the old shells up for sale?
What is up man! Thanks! The V1 dbxl-e body panels I still have. The two side panels have cracks up near the front wheels. I originally used shoo goo on them. Easily repairable. Up to you. Appreciate you stopping by 👊 🤘
Can you attach the old panel onto this so that you keep the design of the original? I mean using the fiber panels as reinforcement underneath the original panels? Thank you
@@jcamacho12000 hello. I'm sure with longer screws it can be done. But the front body posts may not be long enough for a clip. Thanks for watching 👊 🤘
Bro, what video do you go over that Center brace you added?
How's it holding up?
Assuming it's custom?
Sup man! Not sure I really covered that tower to tower center brace. Yes I made it myself. Out of 1/2 inch 7075 aluminum solid rod. Cut to length. Drill and tap a hole in each end to bolt onto the shock towers. The front end needs a slight angle to it for tower fitnent. Then I drilled a hole in each aluminum tower to bolt the rod on. Really stiffens the chassis.
Nice whip brother! Hey umm, what type of set tires are those?
Thanks!!! The wheels and tires are Proline Badlands mx43 for the Xmaxx. I used a 3/4 inch step drill bit to make center hole big enough to fit 5th scale hexes. Appreciate you stopping by 👊 🤘
@SteelCityRC oh ok cool thanks for the information Sir.
Hi, are these panels good?
Hello. These panels are top notch. Look beautiful and fit perfectly. Very strong carbon fiber used. Very shiny smooth finish. Love the panels. Appreciate you stopping by 👊 🤘
Very nice 👌 👍 💥💥💥
Heck yeah! Thanks man! Loving the carbon 👊🤘
👍🇨🇦🤠
Yo! Thank you so much 👊🤘
Bro the blue is sexy. I want to get the red for my dbxl-e but they are sooo expensive and im a hard basher.
I agree man! Absolutely love these panels. I actually got these panels to bash with. In grass I have rolled and crashed a few times. Doing well holding up great. On road or gravel it would be destroyed though. Really appreciate you stopping by 👊 🤘
Why does the nose look like it’s bent or misshaped? Thats not good for 350.00. Outside of that it looks absolutely gorgeous I have the red one on order.
@mikeguzmansr hello. I didn't notice the bend. It is a 7 year old RC that has been used and used. Maybe the cage is tweeked a little? I don't know. I can tell you that it went together super easy. I didn't have to pry to get screws in. I am not a big Vitavon fan either. Too expensive for what you get. FID is half the price and same quality. Hope you like your body panels bro. I love mine. Thanks for stopping by 👊🤘
👍💯
Thanks Dave 👊🤘
Like a kid in a candy store! 🤣 Dude my FID front hubs broke. The little wing that the steering links connect to broke off and no parts available. I still need a motor also. Both my cars are down and out. Sad clown of life!
Well that sucks! Can you use stock steering knuckles till you get aluminum? I am just now putting thise Vitavon knuckles on. Years of plastic with no real issues. I have a Dynamite 800 kv motor brand new for sale. Lemme know.
@@SteelCityRC Can't use the plastic unless I revert the whole front end back to stock. FID parts are not interchangable with stock parts.
👍💪🙏✊️💯
Thanks man! 👊🤘