Це відео не доступне.
Перепрошуємо.

How to Set ALH Injection Pump Timing and IQ

Поділитися
Вставка
  • Опубліковано 28 лют 2020
  • How to Set ALH Injection Pump Timing and IQ
    quick video sorry about the shaky camera

КОМЕНТАРІ • 43

  • @tracystamatakis
    @tracystamatakis 3 місяці тому +2

    Please remake this video where you focus on the computer screen.

  • @1ggssxxrr
    @1ggssxxrr Рік тому

    this is one of the most important things to know ...thanks for the video

  • @BenYokumFarzet
    @BenYokumFarzet 7 місяців тому +1

    Can changin the values somehow damage the engine/injectors?

  • @1975Kombi1
    @1975Kombi1 Рік тому +1

    If I have a stock ALH, stage 1 EGR delete. And IQ should be 3-5. Where would be the best for a stage 1 tune. Closer to 3 or closer to 5?

  • @bernardobranco2611
    @bernardobranco2611 4 роки тому +2

    Hello i have a alh engine on a golf 4. How i incress the power whit iq and timing ajustment ? Stock ecu map.
    Tanks from Portugal

    • @ERAutomotive
      @ERAutomotive  4 роки тому +2

      hi you would get a remap to accomplish what your asking for

    • @bernardobranco2611
      @bernardobranco2611 4 роки тому +1

      @@ERAutomotive i have a kess v2 but i dont get conectec whit my car

    • @ERAutomotive
      @ERAutomotive  4 роки тому +1

      For alh I use mpps. I’m not sure about kess. Check compatibility with kess and your ecu

  • @andreamonastra6622
    @andreamonastra6622 2 роки тому +2

    Hi I have an alh tdi and have tried adjusting the timing. The problem is that the timing is too advance and I can't delay it because the regulation pulley stroke is finished . The car runs decent but the timing is out of the pattern . Could this be a problem or can I keep driving like this? The timing is 5.7 btdc (2 btdc is the maximum timing specification). Sorry for my bad English

    • @ERAutomotive
      @ERAutomotive  2 роки тому +2

      You want to look at the timing graph not just measuring blocks

    • @andreamonastra6622
      @andreamonastra6622 2 роки тому

      Is out of the graph. Too advanced right there

    • @ERAutomotive
      @ERAutomotive  2 роки тому

      Personally I would get it in spec
      Might have to re lock everything and start there

    • @andreamonastra6622
      @andreamonastra6622 2 роки тому

      Ok thanks a lot 👍🏼

    • @colemauck9858
      @colemauck9858 Рік тому

      @@ERAutomotivewhy put the timing near the green instead of the middle?

  • @cokula97
    @cokula97 2 роки тому +1

    Mate please i need help, so my car is stuttering at idle, soudns exactly like your car before you open the tdi timeing chart. My best guess is that i should advance the timeing belt a few degrees, do you have any suggestions. Its a 06 BLT out of a vrs fabia

    • @ERAutomotive
      @ERAutomotive  2 роки тому +1

      You’ll need to look in vcds and see where your at and adjust accordingly
      But isn’t that a pd engine not a ve engine
      Not sure we don’t have blt here

    • @cokula97
      @cokula97 2 роки тому +1

      @@ERAutomotive Im pretty sure its the slow down shudder thing its exactly like that, so im going to drive it now until it occurs then il check and adjust iq

    • @ERAutomotive
      @ERAutomotive  2 роки тому +1

      Ok yeah if it is slow down shudder check iq and adjust as needed
      Would be a great start

    • @cokula97
      @cokula97 2 роки тому

      @@ERAutomotive Well i checked its not the iq its sitting at around 6,5 even when it starts to stutter never goes to 0.
      Does that mean its related to the timeing belt not the iq?

    • @ERAutomotive
      @ERAutomotive  2 роки тому +1

      That’s not spec for iq on the engines I know here
      It
      Should be a stable number not a changing number

  • @julian8615
    @julian8615 6 місяців тому

    Hello! I have a 1.9 tdi agr 90 hp stock, the IQ is 2.8 / 3.0 MG with a temperature of 92 ° at idle and with everything off, are these values ​​correct? If I increase the IQ more (close to 3.6 / 3.8 MG) I will to achieve better performance? thank you so much

    • @ERAutomotive
      @ERAutomotive  6 місяців тому +1

      That’s no far off of ideal
      If I remember between 3-5 is factory spec range
      As long as your in there your good
      Personally I go 3.5-4 area

    • @julian8615
      @julian8615 6 місяців тому

      ​@@ERAutomotiveThanks for responding! If the value is lower, will it consume less or the same but with possible vibrations at idle?

    • @julian8615
      @julian8615 5 місяців тому

      Finally I adjusted the IQ to 3.2/3.0 MG at 92° and although it lost very little in performance it gained more smoothness at idle and even sounds a little better, excellent videos! thank you so much!

  • @j.c.m5168
    @j.c.m5168 3 роки тому +14

    This was the least informative video on earth. You were shooting the keyboard half the time. Hahaha

    • @nikamota
      @nikamota 3 роки тому +6

      I learned absolutely feck all from watching this video either.

    • @davidmelville8018
      @davidmelville8018 2 роки тому +4

      My thoughts exactly the filming was very poor.

  • @yohanroy4315
    @yohanroy4315 Рік тому

    Hi i have a stage 2 alh .260 injector pd150intake and a bew turbo, i blew the turbo , put a brand new one i have 20 psi but i dont have the sa power that i had after 2300rpm its just smoking whith no power, what should i look?

  • @rickshultz8995
    @rickshultz8995 2 роки тому

    how did you getr the popcorn tune on the ve motor

  • @norriscarey9822
    @norriscarey9822 3 роки тому

    In the intro, the rev limiter on the car, how did you go about that? thanks

    • @ERAutomotive
      @ERAutomotive  3 роки тому +2

      I have video for hard cut on alh
      Check it out it’s part of a tune

    • @norriscarey9822
      @norriscarey9822 3 роки тому +1

      @@ERAutomotive where did you buy your tunes? I’m new to my TDI. I have VCDS, is that just for diagnosis or can be used to tune? Thanks

    • @ERAutomotive
      @ERAutomotive  3 роки тому +1

      Vcds is just for diagnosis

    • @thresholdose336
      @thresholdose336 3 роки тому

      @@norriscarey9822 mppsv13

  • @KenPaisley
    @KenPaisley 3 роки тому +2

    Don't disrespect a Beetle like that!

  • @austinreeves4093
    @austinreeves4093 5 місяців тому

    Can’t hear you when the car is running

  • @johanverster5638
    @johanverster5638 11 місяців тому

    You don't tell how you set it on the pump pocket. I know how, but many people dont