Honestly man, most helpful Jeep Cherokee guy on the internet! Super easy to follow and I’ve watched a lot of your videos to help fix and replace parts on mine I’m trying to rebuild to new. Dont stop making content 🙌🔥
On the clutch fan shroud, it's is better to clearance the bottom to clear the fan clutch so you don't have to remove the upper support and move the radiator to get the shroud installed. you can do the clearance trim with the shroud in place. You only need to trim about a half inch of material maybe 6-7 inch wide to clear the clutch. Once this is done, the shroud will lift out from the top without any problem and you don't have to worry about nicking the radiator. Hope this helps. God bless, stay well and Happy New Year.
Fucked my brothers jeep pretty badly similar to this I hit a pole after power sliding lost control Long story short I didn’t bend the chassis , no that was to easy , I split it in half torn it apart Found this video really helpful thanks🖤
How much snow have you gotten so far this winter Austin? Supposed to get 6-12” in the next couple of days here near Lacrosse. I thank God we have our XJs to get to work 👍 You and your family have a blessed week In Jesus Name brother!
Great video Austin ! I'm so impressed with your knowledge and how you are a great speaker on the install process . Your XJ is looking so good and I'm looking forward to your next video. I own a TJ and have put a ton of hours and money into it . I have a large automotive back ground so its pretty easy for me to do almost anything . I also do fabricating and have a degree in small engine repair. I have a neighbor that has a XJ just sitting in his driveway that hasn't run in years . I have offered to buy it many times but he just wont sell it. I want to add a XJ to my fleet of TJ's and JK's . Take care and catch you on your next video .
Great video Austin! Glad to see your workarounds and fabrications when components don’t fit exact and your sage advice not using zip ties for cooler ac condenser and radiator the fins are paper thin zip ties + vibration would spell redo keep up great videos
Nice job Austin.I hope that camshaft holds up for you.I have heard about people getting bad flat tappet camshafts recently.It doesn't seem to matter what brand you get either.I hope your's works out buddy...🤞👍
@@OutJeeping dang I’ve been looking for one but I can’t find any for the new model XJ only the old style for the older body style so was hoping you knew a good source that wasn’t just eBay for one
Always awesome to see people fix things instead of getting rid of it. Love my xj.
Honestly man, most helpful Jeep Cherokee guy on the internet! Super easy to follow and I’ve watched a lot of your videos to help fix and replace parts on mine I’m trying to rebuild to new. Dont stop making content 🙌🔥
On the clutch fan shroud, it's is better to clearance the bottom to clear the fan clutch so you don't have to remove the upper support and move the radiator to get the shroud installed. you can do the clearance trim with the shroud in place. You only need to trim about a half inch of material maybe 6-7 inch wide to clear the clutch. Once this is done, the shroud will lift out from the top without any problem and you don't have to worry about nicking the radiator. Hope this helps. God bless, stay well and Happy New Year.
Great tip!
Fucked my brothers jeep pretty badly similar to this
I hit a pole after power sliding lost control
Long story short I didn’t bend the chassis , no that was to easy , I split it in half torn it apart
Found this video really helpful thanks🖤
Sooo did it ever run ? Did you have more power with the new cam ? Am I crazy but doesn't it make sense to do a follow up video showing it running ?
@ROBMCKISSOCK Must have not watched the whole video.
How much snow have you gotten so far this winter Austin? Supposed to get 6-12” in the next couple of days here near Lacrosse. I thank God we have our XJs to get to work 👍 You and your family have a blessed week In Jesus Name brother!
Yup we got dumped on the last week. I good 18" from the past few storms!
those power steering line are a pain when everything is in the way.
Hey, Austin... if you dont mind me asking, where in WI are you? I'm in SE WI... both of my xjs have had the typical WI issues.
Same here, in SE WI
Thank you so much for all your instructional videos! Also, where is your Exhaust Downpipe from? Thank you! ~ 99 Cherokee SE
Mine is a Walker replacement pipe but that will be getting swapped out for something else soon as it is junk!
Tru Cool 47391 trans cooler. I'm just saying.
To each their own on brands
Doing great Austin
Great video Austin ! I'm so impressed with your knowledge and how you are a great speaker on the install process . Your XJ is looking so good and I'm looking forward to your next video. I own a TJ and have put a ton of hours and money into it . I have a large automotive back ground so its pretty easy for me to do almost anything . I also do fabricating and have a degree in small engine repair. I have a neighbor that has a XJ just sitting in his driveway that hasn't run in years . I have offered to buy it many times but he just wont sell it. I want to add a XJ to my fleet of TJ's and JK's . Take care and catch you on your next video .
You should list where you got the new parts like radiators
Description is now updated, sorry for the delay.
Where did you get the "Straight 6 Empire" hoodie??
I think they sell it on teespring.com if you search for it.
Great video Austin! Glad to see your workarounds and fabrications when components don’t fit exact and your sage advice not using zip ties for cooler ac condenser and radiator the fins are paper thin zip ties + vibration would spell redo keep up great videos
Great video, had to redo my front end to my 99 jeep Cherokee xj several years ago due to a deer accident.
Nice job Austin.I hope that camshaft holds up for you.I have heard about people getting bad flat tappet camshafts recently.It doesn't seem to matter what brand you get either.I hope your's works out buddy...🤞👍
Hope mine keeps working good.
We’re did you get a new vacuum ball
I was able to reuse my original one.
@@OutJeeping dang I’ve been looking for one but I can’t find any for the new model XJ only the old style for the older body style so was hoping you knew a good source that wasn’t just eBay for one
@@Anthony_AdventuresI have a ball style vacuum resivor up for sale if you want it
Love the video content but, stop and take a breath. Way toooooo much talking.
I appreciate the talking because when it comes to me working on my XJ the extra info usually helps me get an idea what im doing.