Very informative video.👌 Just a little hint for anyone who watches this.... To quickly access the 'Work Offset' page you simply press the F4 button to swap between 'Tool' and 'Work' offsets . Thanks Mr Fuller for this tutorial.
This is so easy. My shop teacher did some sort of counting x amount of ticks forward till it tips off, then x - 1 back to find the axis where it bumps off. His way still doesn’t even make sense to me. Thank you. I don’t know why he has to over complicate it so much
With the doors closed when touching the workpiece edges using the edge finder, can you see the finder bumping off its axis clearly and easily ? Is it possible to set the spindle speed to the safe 700 rpm and leave the doors open? Thanks.
so the x and y coordinates you set on the left side upper of material, some time set up x and y on the right side upper of material or lower left or right side of material.so can you explant how do we know to find which corner will set x,y coordinates for material ? please
Very informative video.👌
Just a little hint for anyone who watches this.... To quickly access the 'Work Offset' page you simply press the F4 button to swap between 'Tool' and 'Work' offsets .
Thanks Mr Fuller for this tutorial.
Great tip! 👍
The clearest tutorial I found so far big thanks!
I love how you explain every step. You are an amazing teacher. Thank you so much❤
Do girls do this job？
Yes, women do this job. There are no jobs that are just men jobs, just jobs that a person who has the capability and desire to do.
I think is the best video about of this topic. very clear and professional !
Thank you kindly for your efforts in setting up the X&, Y-axis, and for your time.
Glad I could help! Good luck!
Great video, great camera work. Really helped.
This is so easy. My shop teacher did some sort of counting x amount of ticks forward till it tips off, then x - 1 back to find the axis where it bumps off. His way still doesn’t even make sense to me. Thank you. I don’t know why he has to over complicate it so much
I really thank you for making this kind of tutorials. They are very informative. Please keep making more of these videos .
I don't do any cnc or any sort of machining, and I loved this video. Autistic engineer father sent me this, and I loved every second of it, haha
glad u enjoyed it!
Very clear tutorial Thank you
Good video John, thanks for posting it was helpful to me!
Glad to help, good luck!
Exceptional
Nicely Done.
nice and very clear tutorial.
I loved it. But... why didn't you subtract .100 from the G54 Xoffset before setting the edge in the control panel?
I did, go to 8:40
@@JohnFuller804 i trust you did. I missed it.
Thanks.👍
With the doors closed when touching the workpiece edges using the edge finder, can you see the finder bumping off its axis clearly and easily ?
Is it possible to set the spindle speed to the safe 700 rpm and leave the doors open? Thanks.
What i do is after touching off on axis I origin the axis than shift .100 than part set and do that for both x n y so u dont have to mess with offsets
This is very clearly explain working procsiss amazing👍 thank you
glad to help!
thanks, help me a lot to understand how I can meke work off set.
so the x and y coordinates you set on the left side upper of material, some time set up x and y on the right side upper of material or lower left or right side of material.so can you explant how do we know to find which corner will set x,y coordinates for material ? please
Thanks it works good
Nice content..
I have a question?
Is it require to minus the radius of edge finder.
Yes!
Thanks for the reply..
@@MM-hz7yx It is, otherwise your tooling will be off by half the diameter of the edge finder you used.
Спасибо Вам за урок. Супер.👍
is there a way i can find a written procedure on this on the internet. i am learning disabled and would like some material to read as well to learn it
James, check back with me in the fall 2021. I should have some typed up instructions available by then for my class.
Thank you!!!! 🙏🏿
❤❤❤ Yes yes
hi, do you have to zero the z axis also ?
Thanks sir
❤️❤️
You never run a edge finder more the 700 R.P.M.
guess it depends who you ask........
www.practicalmachinist.com/forum/threads/edge-finder-speed-question.376504/
That’s the minimum
Sar mujhe Hindi me batao