@@JoshuaBardwell got it all figured out, brother. Thanks. I actually watched all your videos. Just missed something small when binding he RX. I didn’t have the model match number correct. Could have sworn I had it right. Oh well. Thanks for all you’ve taught me. 🙏🏻
My xbox is mostly mode2 at least in the pitch. I always invert and have forever. I have a hard time going back to play Fallout 4 after flying a while, and it still gets me once in a while wanting to yaw with the roll. I just need to remap my xbox again.
Been a little over a year and I have never done that to my throttle..... I will though.😅. I do for my rx though which is probably higher and why I always could arm.
FPV drones have me feeling completely inept, though I know I’m not. Been building and flying RC helis for years, but here it goes. Well, I followed all your guidance as well as I could. For some reason, when I get into Betaflight, my transmitter inputs are not registering at all on the Receiver page. My transmitter and receiver are bound. The light is steady on the receiver. I made sure soldering is TX to RX / RX to TX. I’m at a loss.
I had a similar issue when i binded my radio. It would bind, but not register input. For some reason, my radio was set to slave out of the box. I changed mine to master and it started seeing all my inputs.
About the mode 2 mapping versus us youngins who play first person shooter games... I know in video games swapping controls is super easy, to accommodate "southpaw" players or other schema. If possible, wouldnt it be better to have a switch or dial or whatever on the remote simply switch between different modes? That would eliminate the issue all together; people could fly whatever mode they want and when sharing at a field others could just flip a switch to put it in their desired mode. If not possible, why not?
In acro or air mode during a dive mostly my drone will jerk to the lot for a split second by it's self forcing me to correct and I do t know why it does this please help it's brand new btw
i'm building your quad. problem dji controller bound goggles2 bound to air03 have video betaflight does not see my system . can't assign buttons .what am i missing?
need a little help so I must have done something wrong somewhere cause when i raise the throttle the motors throttle up fine then when i throttle down they start going faster on there own have you had this issue before and can you help me figure out what i did wrong! thanks in advance really would appreiciate the help want to fly so BAD....
@joshua is this a newer way of setting the endpoints? You had an older video that was a littl different. ua-cam.com/video/1azl1f8qJ84/v-deo.html tks JB!
Why? It’s better to learn the mode you want (preferably mode 2). I’m left handed and had no issues with learning mode 2. As with most things if you just learn the way as everyone else there’s no reason for left/right handed modes
Buy the DIY build kit at:
* Analog video version - bit.ly/3QtWKOd
* Digital HD video version - bit.ly/45AUklt
@@JoshuaBardwell got it all figured out, brother. Thanks. I actually watched all your videos. Just missed something small when binding he RX. I didn’t have the model match number correct. Could have sworn I had it right. Oh well.
Thanks for all you’ve taught me. 🙏🏻
THE most awesome way to set endpoints!
such helpful, nothing was working with my fpv drone until I found this videos, tank u for that
All videos in this series are in this playlist: ua-cam.com/play/PLwoDb7WF6c8l24IM83wIS94XzhuMVC2gx.html
Thanks a bunch for another excellent tutorial, Joshua! 😊
Stay safe there with your family! 🖖😊
My xbox is mostly mode2 at least in the pitch. I always invert and have forever. I have a hard time going back to play Fallout 4 after flying a while, and it still gets me once in a while wanting to yaw with the roll. I just need to remap my xbox again.
Been a little over a year and I have never done that to my throttle..... I will though.😅. I do for my rx though which is probably higher and why I always could arm.
FPV drones have me feeling completely inept, though I know I’m not. Been building and flying RC helis for years, but here it goes. Well, I followed all your guidance as well as I could. For some reason, when I get into Betaflight, my transmitter inputs are not registering at all on the Receiver page. My transmitter and receiver are bound. The light is steady on the receiver. I made sure soldering is TX to RX / RX to TX. I’m at a loss.
I'm having the same issue did u ever resolve it
I had a similar issue when i binded my radio. It would bind, but not register input. For some reason, my radio was set to slave out of the box. I changed mine to master and it started seeing all my inputs.
About the mode 2 mapping versus us youngins who play first person shooter games...
I know in video games swapping controls is super easy, to accommodate "southpaw" players or other schema.
If possible, wouldnt it be better to have a switch or dial or whatever on the remote simply switch between different modes? That would eliminate the issue all together; people could fly whatever mode they want and when sharing at a field others could just flip a switch to put it in their desired mode.
If not possible, why not?
The throttle is not spring loaded and does not move to 0 automatically, but otherwise its all software and can be done
In acro or air mode during a dive mostly my drone will jerk to the lot for a split second by it's self forcing me to correct and I do t know why it does this please help it's brand new btw
Hi Joshua! What to to if there is no movement on Betaflight when you move your joysticks? thank you
I'm having the same issue ,did u ever resolve it
i'm building your quad. problem dji controller bound goggles2 bound to air03 have video betaflight does not see my system . can't assign buttons .what am i missing?
need a little help so I must have done something wrong somewhere cause when i raise the throttle the motors throttle up fine then when i throttle down they start going faster on there own have you had this issue before and can you help me figure out what i did wrong! thanks in advance really would appreiciate the help want to fly so BAD....
Nothing is broken. Here's why it happens: ua-cam.com/video/xBaefeQtA1c/v-deo.html
can a gps module without scl,sda pin do position holding (im using a tbs m8 gps module)
Do I need beta flight for dji os?
Beta flight is pretty much for carbon fiber drones, only which can have the Dji VTX. Drones that are 100% Dji you don't need beta flight
I swapped yaw and roll and inverted my pitch 😎 feels just like an FPS game. sorry not sorry bardwell.
Heresy! Burn the witch!
@joshua is this a newer way of setting the endpoints? You had an older video that was a littl different. ua-cam.com/video/1azl1f8qJ84/v-deo.html tks JB!
You are left handed and its not hard to change the mode, left handed people should be mode 3 and right handed mode 2
Why? It’s better to learn the mode you want (preferably mode 2). I’m left handed and had no issues with learning mode 2. As with most things if you just learn the way as everyone else there’s no reason for left/right handed modes
@@Gurklukt because the pitch and roll should be used by your best hand