How to cut aluminum profiles at home

If you need to cut some aluminum profile at home, and you don't want to damage any table, this is how to cut the aluminium just using an arc saw, a shelf board and a cheap miter box. This way I get a nice crosscut every time I cut. And I don't damage any table. Good for any DIY task if you need to cut aluminum or any wooden strip.

[@jandroid1962]

This video was perfect! I have to cut metal transition strips. I have a hack saw. I knew I needed a miter box and blade that will cut metal. Best part of your video was how to keep the miter box from moving. Simple tasks can be frustrating if you have never done them before. This will be a snap. Thank you!

[@beingveganandwokeisnojoke374]

Yeeeesssssss!!! You may have just saved my project from going to shambles. Thank you :-)

[@Hedgy327]

Very simple, very clever. Thank you

[@goldbunny1973]

Several good tips there and the best FFWD Ive seen in ages : )

[@essopdmoosa2001]

always good tips here for new diyers.keep it up.

[@tmst2199]

I ended up cutting a few the hard way, but still it helped seeing it done correctly.

[@breannestahlman5953]

Super, exactly what I needed, Thank You ! !!

[@H4rtK0r]

Very good tips! Thx

[@kristi7626]

That was brilliant idea 👍🏻😊

[@rubenpazos1800]

disculpe mi ignorancia ya que no conocía que tuviera los mismos videos en castellano, gracias por contestar mi reclamo y siga adelante con su blog. atentamente Rubén Pazos desde Argentina, ciudad de San Justo pcia. de Buenos Aires.

[@pritam144]

Clever engineer 👏🌹🙏

[@a_gg]

Thanks! What do you use for sanding?

[@SaraFJones]

Man that’s a neat idea!

[@WoodworkingwithDIYtools]

Thank you very much Susie :D. I think it is a quite clean way to cut aluminium at home :D

[@broccolihart1]

Genius !!

[@deltadawn2409]

So helpful!
Will I be able to cut half centimeters off of strips that are too long using this method?
Or is it harder to cut short pieces off?
Any suggestions would be helpful.

[@tinashemukota1431]

Simple but genius

[@12vLife]

Is that 1/4 inch aluminum? I have an engineering questions. If I lay (3) 48x4x.25 strips of aluminum 6 inches apart and screw them in deep and well on 1 inch overhangs on each end will that support 500lbs? It's okay (actually preferred) if they bend a little .

[@avinashbhoir4433]

*Very good*

[@Agatocles1]

Just a suggestion: use oil to reduce friction, WD40 will do. Besides of reducing effort it will reduce emission of particles because they remain in the oil.
En Castellano: si se usa aceite para lubricar, por ejemplo WD40, se reduce la fricción y la emisión de partículas que quedan pegadas en el aceite.

[@jashmota5054]

hi, where to use the oil? should i pour it on the hacksaw blade? noob here

[@MM-oh3zs]

@@jashmota5054 Just drink the oil, it does reduce reductions in your muscles.

[@272attwell]

This video came 6 hours too late for me today...but very helpful for the next time!

[@hansdegroot8549]

We are thankful to you that you take the effort to translate everything to English.

[@deemdoubleu]

Good idea ;-)

[@sairamganesh88]

i wish i had seen this video before i messed up cutting my 2020 aluminum extrusion...

[@nathanmciver6496]

Hmmmmm

[@santhoshkodakara7026]

Good idea

[@r_ramendump9681]

This helped

[@scubalex9145]

The idea to screw a piece of wood at the base of the mitre box ist quite ok but why don't you put this piece of wood in a vice ? In the vice it would be much more confortable and you could make longer strokes and get a nicer cut with less energy.

[@wolfe1970]

And ideally you want to use a blade that is 32 tpi for a clean easier cut

[@mit1346]

My mitre box is not perfectly snug with the saw blade. It has a few mm in the gap that makes a slight angle on the cut. I'm wanting to cut a fly screen door frame to fit but I don't know how to make it perfectly square without a drop saw..

[@WoodworkingwithDIYtools]

Maybe you can clamp some pieces of wood in the front and in the back of the mitre box to avoid the gap and help guide the saw vertically

[@omkarsalunkhe7432]

Where i will get meter box

[@tmst2199]

Nice. You're a real Russian hacker (hack-sawyer). :-)

[@tmst2199]

Oops. I guess I need to work on my accents! I'm American in case you didn't know :-)

[@okije]

Niceeee 👍

[@gwav1a]

Why not use a chop saw?

[@SanthoshSanthosh-qh7jd]

Tq

[@rubenpazos1800]

señor acuña padin, con todo respeto me dirijo a usted yo que soy su seguidor de mucho tiempo para expresarle mi disconformidad por sus videos hablados en ingles. yo veo videos en ingles y que tengo que aplicarle el traductor y dichas personas no se preocupan por por los que no hablan ingles. desde siempre me gusto su pagina tanto por los contenidos como porque estan comentados en mi mismo idioma. considero injusto que haga viedeos en ingles pero entiendo que economicamente debe ser importante, de todas maneras le digo que siempre me gustaron mas en castellano. atte. Ruben Pazos desde argentina e hijo de Gallegos.

[@jtbmetaldesigns]

If your saw blade is getting stuck then rub a couple drops of 3 in 1 oil on it:

[@FPChris]

Get a small mitre saw and and Diablo blade.

[@tombaker3794]

👍👍

[@karimbouzelif3831]

Tu coupe de l'aluminium ou du plastique la 🤔

[@chessguru900]

Just use a vice and make your life easy.

[@miguelsalami]

Nice METER BOX I hope you have Low Electric bill🤓

[@radiationsnowman]

you vill do as vee say, and you vill like it! (LOL)

[@wstibbs1]

Frank Catanzaro that’s rude