✨ Bosch Dishwasher - Drain Pump - Easy Replacement ✨
Вставка
- Опубліковано 3 жов 2024
- ✨ Bosch Dishwasher - Drain Pump - Easy Replacement ✨
Easy to replace the drain pump from the front of the dishwasher.
Click here to order a new Bosch Drain Pump: amzn.to/3XHTEXD
QUICK AND EASY APPLIANCE DIY REPAIR VIDEOS - SAVE BIG $$$ BY FIXING IT YOURSELF✅
✨ If the video was helpful, remember to give it a Thumbs Up 👍 and consider Subscribing. New videos every Saturday ✨
-Subscribe Here: / @scottthefixitguychannel
🛠- Do You Need Any Additional Help? Become A Member of Our Channel Today and Get LIVE HELP from Scott With Your Appliance Repair. Pick #1 FIX-IT FAN for Just $4.99 and get Text, Zoom, Email or FaceTime Live Help. Non-Members pay $45.00 for Live Help. Just $4.99 for Channel Members. Click Here to Join Today: / @scottthefixitguychannel
-Facebook: / scottthefixitguy
-Twitter: / scottthefixitgy
-Instagram: / scottthefixitguy
-UA-cam Channel: / scottthefixitguychannel
-If My Advice Has Helped You…
Please Click Here To Donate: www.paypal.com...
Donate with Venmo - Click Here:venmo/u/Scott-Flint-1
-GREAT PLACE TO ORDER O.E.M. Genuine Parts for Your Appliance - Click Here: fix.pxf.io/MmrxYY
-Need Expert Appliance Repair Help Today? Click Here:asqme.com/@sco...
-Good Place to Buy Parts: bit.ly/3wD4L5W
-List of Tools used by Scottthefixitguy: • ✨ Scott The Fix-It Guy...
-Need More Expert Help with Your Repair? Click Here To Schedule a 15 Minute Meeting with Me Using Zoom 💻 : calendly.com/s...
Disclaimer:
Because factors beyond the control of Scottthefixitguy, I cannot guarantee against improper use or unauthorized modifications of this information. Scottthefixitguy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Scottthefixitguy recommends safe practices when working on appliances and vehicles and or with tools seen or implied in this video. Due to factors beyond the control of Scottthefixitguy, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Scottthefixitguy.
Thank you 😊
PLEASE HELP TO KEEP THIS SERVICE GOING - THANKS SO MUCH😀
www.paypal.com...
Donate with Venmo - Click Here:venmo/u/Scott-Flint-1
CLICK HERE FOR GREAT DEALS ON APPLIANCE PARTS: bit.ly/3wD4L5W
USE THIS CODE TO GET 10% OFF : M5PV3CLC2X
Please CLICK Here To SUBSCRIBE: / @scottthefixitguychannel
Join Our Channel To Get Access To Perks:😊
/ @scottthefixitguychannel
Check Out Scott’s over 600 Appliance Repair Videos At Our 2nd CHANNEL:
/ @quickandeasy5minuteap...
CHECK OUT OUR NEWEST APPLIANCE REPAIR CHANNEL BY CLICKING HERE: / @fastfreefixes
CLICK HERE TO SEE OUR NEW TESLA 🚘⚡️ CHANNEL:
/ @teslamodel3newowners
NEED MORE EXPERT HELP WITH YOUR REPAIR? CLICK HERE TO SCHEDULE A 30 MINUTE MEETING WITH ME USING FaceTime📲 OR Phone Call☎️ OR Zoom💻 Meeting: calendly.com/s... .
.
CLICK HERE FOR GREAT DEALS ON APPLIANCE PARTS: bit.ly/3wD4L5W
USE THIS CODE TO GET 10% OFF : M5PV3CLC2X .
.
DISCLAIMER: This video or description may contain Amazon affiliate links, which means that if you click on one of the product links and buy the product, I’ll receive a small commission. Thank you for supporting this channel.
Scott The Fix-It Guy *
*
🐔 Check Out Our New Channel Dedicated To Showing How To Raise Your Own Backyard Chickens: / @raisingbackyardchickens ***
***
Scott The Fix-It Guy - Appliance Repair Videos Do you need More Appliance Repair Direct Help from Me? Visit me at:AsqMe.com@ScottTheFixItGu and I'll help you get your appliance working again quickly.
![[UA] NAVI проти G2 Esports | Blast Premier Fall Final](http://i.ytimg.com/vi/QWlIm4FGESQ/mqdefault.jpg)
Thank you Scott! I used this video and part to replace the drain pump on a Bosch Super Silence Plus 42 DBA that was throwing up an E63-02 error code. Getting the unit disassembled was quite easy, but putting it back together was hard. I had a hard time fitting the new pump in. I had to use plenty of dish soap on the unit itself, rather than the pump, and push quite firmly. I wish I'd taken a video of how I disassembled the unit so it would have been easier to put back together. I followed other commenters advice and used towels to clean up the excess water before disassembling the unit, so very little spilled out.
The local appliance guy wanted $500 to do this. I'm saving this video and next time I'm going to book a facetime with you.
That is excellent News😊😊😊
Thanks Scott. My Bosch dishwasher required that all the screws be removed, in order to remove the door panel, because it's one piece (not two like the one you were working on) but everything else was the same and it was a quick fix. I'm so happy I didn't have to call a Bosch repair person. Thanks again!
Thanks Maggie❤️😊
Great video. Replaced mine in < 1 hr. Make sure to seat the new pump securely. I suggest to give rock it a little after you think you've got it on. When I wiggled mine after I thought it was on I found the back of the motor moved and had to twist and push at the same time to seat the back of it. Should barely move at all if it's on correctly.
Great advice, thank you😊
Very helpful! In my case a piece of glass had gotten through all the filters and was blocking the impeller. Had to take the assembly off to find it. Never would have figured out how to disassemble without the video. Thanks!
Very good,
Thank you😊
Omg thank you so much for this video. Husband has b en out of work and I found myself having to choose between fixing the dishwasher or xmas. Scott. You saved xmas! I'm so grateful to people like you who post these videos.
Thanks so much Paula😊
I kept getting the "E-24" error code, and was always able to fix it by cleaning out the sump. Until two days ago, when I couldn't get it to reset after a good cleaning. So I called the appliance repair guy, and he said that he could come in two weeks. So I found your video, and you explained the pump replacement so well that I ordered a pump. It came today, and an hour later my dishwasher is working again. Thanks for the great video!
You saved me! After watching your video I knew exactly how to get the drain pump out. I had a piece of glass that was jaming the impeller. Removing it then putting the pump back in place was all that it took. For my model it was easier getting to the pump as I did not need to remove the front panel. Thank You very much.
Great Job,
Thank you
Guess what I’m doing this weekend? Woohoo! Thanks for the step by step! Here’s to hoping I can just remove whatever is stuck and replace everything in the right place.
You’ll do fine Terra, good luck😊👍
This saved me a ton of money. Thank you very much. My problem was that a piece of steel wool got tangled in the impeller causing other hair etc to get in there and it was stuck. I removed it, spent about 45 minutes digging out the tangled mess and it works perfectly. I was able to do this without moving the front door, btw. Thanks again.
Nice job Brian👍👍👍
Your The Man Brian👍👍 I Hope That You Can Become A Member of Our Channel😊👍
Here’s a Membership Link: ua-cam.com/channels/7fBqy8806u1r0NpPv_fQ2w.htmljoin
Thanks! My pump def had gone bad (saw rust inside after taking it apart). Your video showed exactly what had to be done. Ordered the part and replaced it myself - feeling very accomplished.
Very cool😎
Thank you😊👍
Exactly as shown. Fixed my bosch clasixx dishwasher. After pump removal, discovered a peice of glass stalling pump. Many thanks
Nice job Chris😊
Thanks so much! Your video gave me the confidence and knowledge needed to pull off the pump, remove a small debris item that was causing the impeller from spinning. I put it back together, and it works perfectly now. Blessings and much appreciation.
The yacht rock music makes the video but it was the content that saved me…
Thanks so Much 👍
Anybody notice the mouse or its just me 😂😂😂😂3:14 seconds
That is the reflection of light off the camera, but it did look like a mouse popped their head up :p
I saw it!! OMG! Crazy! 😂Definitely not a reflection!
Thanks, my Bosch throws the E25 code constantly and the drain pump has gotten quite noisy. Looks like $40 and 40 minutes later, I’ll have it fixed!
Really helpful, Pump removal a doddle after watching this video.👍👍
Awesome,
Thank you 😊
This saved me during lockdown, not sure I would have guessed at how do remove this myself, surprised how easy it was to remove it having seen your video. Many thanks!
Thank you. Just replaced a drain pump with the help of this video
Great video. Replaced mine in short order
Nice 👍
Thanks. You save me a new dishwasher :D.
Glad I could help!👍😊
Thanks for this. I pulled out the pump, and discovered a small round piece of plastic that was clearly stopping the impellers from turning. Looked like seal from a bottle lid. Not sure how it got there, but now it’s gone the machine seems to work great again!
Thanks so much Phil😊👍
Hi please help. The impeller is spinning but it's not draining. The pipes seem clear. Is the pump dead?
Very helpful, thank you.
You’re welcome😊
Thanks, I’m going to give this a try. I already did the basic troubleshooting and it still isn’t draining.
Please let us know how it goes👍
Nice two tone sub there Scott! Thanks for the help btw...
You’re very welcome 👍
Thanks for your video. My problem (which I was able to fix) was that my Bosch out of the blue wasn't draining and the water pooled in the bottom of the dishwasher. I took out all the water with a shop vac and reset it and tried again. The Bosch then wasn't able to start I assume because it starts by draining any old water which it wasn't able to do The suggestion here to first check the drain hose where it connects to the sink drain pipe is a good one. It's easy to remove (though awkward as hell to get at) and I found a few pieces of debris where the drain hose meets the drain pipe. People should start there to see if that is the easier solution before taking out the drain pump.
If you remove 2 screws you can pull the whole thing out and lay it on it's side, right?
Sometimes if a thick flooring was installed after the dw was there, it's really hard to get the unit out, and maybe this way is better.
I hope it works😊
Very helpful thanks
You’re welcome😊👍
Hey Scott, could this be the issue if its not draining and I’m getting an E19 error well?
Yep, they’re connected.
Something is blocking the drain tube.
Thanks.
How to tell if its the pump or the drain when water not draining inside the dishwasher?
Hey David, it’s usually something clogging the drain hose where it connects to the air-gap or where it connects to the garbage disposal.
Well I disconected the drain tube from the disposal and got no water coming through. Used an hvac to clear water from the base of the dishwasher and got it to run for couple minutes longer. Only thing is when install guys were installing drain hookup they had trouble getting it to screw on the threads. Thanks.
for a Bosch drainage problem (no garbage disposal), after making sure the sump and all the hoses from the dishwasher to the junction with the sink drain were clear, including the tee where it joins, I was about to order a new drainage pump, when I decided to check the p-trap. There was a pair of chopsticks in the p-trap covered in goo. Problem solved. In retrospect the sink drained slowly too.
This video is a helpful tool for anyone wishing to take on this specific task regardless of their level of experience with DIY projects or their familiarity with appliance repairs. We provide quality Bosch dishwasher drain pumps and other Bosch dishwasher spare parts
Thank you
This was the video that gave me confidence to tackle this job on my Bosch SHE65P********. Great video and explanation helped everything go as described. Tested old pump and had 25.5 ohm's resistance and it ran fine on the bench though opaque plastic housing looked very dirty inside. New pump had 27.0 ohm's and opaque plastic housing looked very clean (white inside). Took old pump apart and about 5 -10 drops of stinky water was inside. I'm guessing the rubber seals on the old pump gave out after 9 years allowing water in the sealed magnet area causing torque loss as pump tried to push water up to the counter mounted air gap. Would be nice if they made a seal kit and you could save most of the $100 cost of a new pump. Thanks for your help!
Excellent diagnosis😊👍
yea boy, these pumps ain't cheap
Same dishwasher but need to replace sump gasket. Looks like I need to take the bottom of the dishwasher off but don’t see how. Any help ?
Thanks. You may have saved me some face, and some time. Not to mention cash! I have a newer model, but I'm betting they haven't changed the access much
Scott. Water isn't draining completely after the cycle. It will drain if I do the the drain/cancel procedure. Any idea what that would be? Thank you.
Hi Dan,
There’s a partial obstruction of the drain line.
Most likely near the air gap located near the kitchen faucet.
I have a question: Does the impeller having no resistance when turning mean the Bosch drain pump is bad?
The modern ones have almost no resistance.
@@ScottTheFixItGuyChannel First of all, thank you for your reply. I’m troubleshooting and Ascenta SHE6AF02UC/05 and have cleared the drain hose, p trap, and even removed the drain pump and inspected the check valve. All are good.
When I lift the flood dome at the bottom of the dishwasher, the pump activates and turns. I can momentarily see a whirlpool forming at the base of the unit but then it stops. If initiating the drain by canceling the cycle while the door is closed, it throws E25 code.
The motor itself makes a high pitch whine noise (not really loud) while spinning and then stops. I’m thinking some water got onto the motor and made it weak or faulty. Do you have any suggestions or do you think it’s a bad motor I’m dealing with.
Replaced the pump only to find out that the dishwasher stops right before the drain cycle. I turn it off start new cycle/hold reset and 0:01 remaining😂
Great Question👍 Click Here to Get Live Expert Help From Me For Just $5.00: ua-cam.com/channels/7fBqy8806u1r0NpPv_fQ2w.htmljoin
Scott, helpful video, thank you. Question: our Bosch SHX5AVF5UC dishwasher has been having trouble draining for about a year. First thought it was the drainage hose which I cleared and the dishwasher drained well for about a year. Now, having problems draining again. When I disconnect drain hose, water seems to flow unimpeded, indicating no blockage in the hose as before. When I pull up on the float inside the dishwhasher, the pump runs for a couple cycles, about 10 seconds (and drains water) but then stops. If I wait a few mins, and pull up on the float, it will again drain for about 10 secs. The impeller runs freely; there does not seem to be anything impeding its function. Since the pump only works for a few seconds when I start it by pulling up on the float, do you think this means the drain pump is bad?
Read the comment that I’m supposed to always have 2 cups of water at the bottom, but it is reddish and smelly so I’m assuming something is stuck. My setup underneath looks different. There is a beige plastic piece across the bottom and a tube in front of the drain. Guessing that the wires are in that. Any ideas how to get past that? And do I pull the dishwasher out to get to the drainage hose? Can I just pull or is it attached to something in the back? Thx in advance for your help!
Hi Sherry,
Can you send a few pictures of what your dealing with to scottthefixitguy@yahoo.com
I got a Bosch that looks almost like this one. I bought it New at Lowe's $550. The first week it worked great. Then it started sounding like a motor boat when it went into the drain cycle. I get this E 24, or E25 error. I use a shop vac and clean it out. But it did not help. In the first month I called the repair guys out 3 times. The third repairman said he put a new drain pump in. So we ran a test and it worked but still sounded like a motor boat in the drain cycle. He leaves and I run a load of dishes I get the error codes again. Over the next 3 years I called the repair guys out 9 times. And it has never worked right. I found a work around. I took my shop vac and hooked it to the drain hose under the sink. When it went into the drain cycle I flip the switch and let the shop vac suck out the water. It is a pain in the backside to do it this way. So the other night I took it apart and pulled the drain pump off. The propeller had 3, not sure what you call them fins or arms left on it . 6 of them were broken off. This is why it sounded like a motor boat. Number 3 repairman Never changed the drain pump out. I took the man at his word. And this is why I could not figure out what was wrong. While it was under warranty, I did not want to work on it, afraid that would might void the warranty. One would think that one of the other 6 repairman that came out would have been able to fix it. All of them told me to wash the dishes before I put them into the dishwasher. I was already doing this. So I got to thinking about the roller for the baskets. I had trouble with them popping off. At the time this did not seem like no big deal. I could just pop them back on. But when I got a close look at some of them, I noticed that where they snap back on the basket, the little tabs that hold them in place were broken off. I can not say for sure if this is what broke the fins on the propeller off. But it is my best guess. So I replaced the drain pump. Now I am on my third load of dishes. First one did fine. Second one I got the error codes. Cleaned it out and ran it again and it worked. Third load just finished and worked fine. And it is quite, it does Not sound like a motor boat. I am NOT impressed with the repairman. Just saying IF you have to call one to come out, watch them like a hawk.
That is a sad tale with a Happy Ending😊
Ok. I followed your instructions and pulled the pump out. I found an rubber band wrapped around the impeller and removed it. Put it all back together and ran a 29 min cycle for washing glasses to test if the machine would drain. The water drained just fine so that problem is fixed by then I got an E11 code. Did I disturb some wires somewhere?
I think you just need to turn on the water again under the sink.
@@ScottTheFixItGuyChannel thanks. Actually, I never turned the water off. I just pressed all the connections in that I could see and it has gone through 2 cycles without any problems. Oddly enough, the screws for the panel were mixed. Some were longer than others.
I dont believe how easily you got the replacement pump in place. Taking the pump out is hard enough, but fitting the new pump in there is freaking impossible!
It was difficult but I was able to get her done.
After removing the old pump, is there a way to confirm that it’s gone bad? I either have a bad pump or I’m struggling to find best loop position for the drain hose under my sink.
Hi Jamie,
I would remove the drain hose from under the sink and put it in a bucket and then set it to drain. If it does drain then you know the drain pump this good if it doesn’t drain you have a bad drain pump.
Scottthefixitguy superb idea. Will try that if error code returns. Repositioned drain hose and so far so good. Thanks for the quick reply!
Mine is partially draining. I always have water down in the filter area. Always smells horrible. I have made sure the drain line runs above where it attaches to the disposal and still have the same problem. Do you think its the pump?
Thanks Barry,
There’s always supposed about two cups of water under the filter.
@@ScottTheFixItGuyChannel Hi Scott, we do not use our Bosch often, so the two cups of water under the filter stink after a couple of weeks. Is there any solution other than me having to remove the two cups of water? Does removing the water cause any harm? Thank you, Mike
My ascenta only works if i take all the pumps off, put it all back together, and run a normal wash setting with a cleaning bottle inside , as soon as i put any thing it to actually wash, theres water in the bottom and if i lift the float at the bottom, it sound like the pump is trying to run but doesnt. There are no food scraps or anything going in the dish washer. Any ideas?
I wonder if the airgap near the faucet is clogged?
@@ScottTheFixItGuyChannel there doesnt seem to an airgap. From what i can see the drain pipe goes straight into the drain for the faucet.
Ive just tried to test it again, and when i pull the float up the pump runs, stops, and then runs again, nd then stops again. I can see a whirlpool in the water and i stuck my finger down and felt the pump move and stop. Could my drain pipe be routed in a bad way and thats whats causing this?
thanks for the video, but man I cant see anything you are doing!!!!
Scottthefixitguy I have a Bosch dishwasher that isn't draining. I have read there is a diagnostic code that I can run to tell me what the issue is. What is the procedure to run the diagnostic code?
The chances that you have a bad pump 5%. The chances that you have a clog in the drain line 95%
I check the filters at least 1x/week. And I even remove the spray arms & check those after each wash. How do I check for a drain clog?
It was the drain pump. What a pain to put back together.
I replaced the drain pump but I still get a e25 error and no draining on a bosch 800 plus. Any ideas?
Can you send me an email to Scottthefixitguy@Yahoo.com with that same question
I have some ideas that should help