Mounting Vises / Simple Metal Workbench / Welding Table P2
Вставка
- Опубліковано 28 вер 2024
- Mounting Vises on the metal workbench / welding table. Built from steel from my backyard junk pile. Top is 48" x 48" x 3/8", Legs 2" Schedule 40 Galv. pipe,
Shelf Support 2" x 2" x 3/16" Angle, Under table support 3" x 3" x 3/8" Angle and 2" x 2" x 1/4" Angle.
Check out Building the table P1 : • Simple Metal Workbench...
Some of following links are Amazon Associate links.
As an Amazon Associate I earn from qualifying purchases.
4" Wilton combo Machinist / Pipe Vise: amzn.to/3GtskW2
6" Kanca Leg vise: www.blacksmith...
Ridgid Pipe vise 2" capacity: amzn.to/3t8CCrJ
Welder : Millermatic 211: amzn.to/46LEO64
Support the channel:
🎯Join this channel to get access to perks:
/ @rrintheshop
🎯Subscribe: www.youtube.co...
🎯Instagram: / rrintheshop
🎯Knocker info: Email To: Video Link: • Build a Dead Blow Hamm...
RRINTHESHOP@GMAIL.COM
#vise #welding #weldingtable
The permanent outdoor work table was one of the most useful additions to my shop. Couldn't live without it. Mine's not nearly as fancy, though, just an old cable spool I absconded years ago. See you got a receptacle close, very handy.
Yep for sure, I love having my outside bench back. Thanks, Merry Christmas.
A handy table became handier. Rail under the leg - good idea - spreads the load.
Thanks for the Christmas card.
Thanks Jere. This is sure working out great. Merry Christmas.
The only thing I would change is the mounting of the Wilton vise so that the jaws were at the same hieght as the post vise. I have a welding table with two vices (one on each end) and there have been many times that I wished I had done that. In fact that project just went on the list. Best of everything Randy.
I considered that, in is about 1 in. lower. I will see what I can find. Thank you Kim, Merry Christmas.
That should give you the right vise for any job and it is Randy Richard right. Thanks for the video keep on keeping on.
Can't have enough vise's. Thanks Harold, Merry Christmas to you and the Boss Lady.
I like it!!..Suggestion, add a swing out drawer on a hinge on a leg to store general tools that you would use, did one on my welder table, very handy
Thanks Chuck. I'll look at that. Merry Christmas.
Liking this outdoors bench a lot. Maybe add a BIG foot pad for that table leg that can catch the vise leg. Now you need a cover for those snow days. I recommend a garden tractor cover. I’m always accused of having too many tools. But I think everyone who is serious about fixing, maintaining, building stuff has, like me, drawers and cabinets full of seldom tools. It makes all the difference in the work you can take on or even attempt to take on. “When you need it you need it” absolutely. My own mag drill I have used 4 times. Twice on overhead I beams for 1-1/4” holes and there is simply no other way I could have done the job without it. For what they charge locally to rent one, using the internet you can now easily justify the cost of buying one.
For sure Sheph7, you can't have enough tools. thanks for stopping in, Merry Christmas.
The swiveling post vise is unexpected and very nice. Thanks for sharing that. I have a very similar set-up with fixed post vise on a by far uglier table. The previous owner had the leg secured with a little welded on bracket which I replaced when I re-mounted with a sort of receiver made from a short piece of 1 inch pipe, seems solid enough to pound on a bit. Anyhow, yet another great Randy in the Shop video. Keep 'em coming and Merry Christmas.
Thank you John. This is a nice vise and I am liking it alot. Merry Christmas.
very good job randy
Thanks Tr. Merry christmas.
@@RRINTHESHOP Merry christmas randy and family
Afternoon Randy 😅
Morning Craig. Merry Christmas.
Nice Randy are we going to be seeing a roof going up over that workbench someday?
Maybe and easyup during the summer. Thanks Jim. Merry Christmas.
Looks very functional.👍
Will you cover it during the winter or bringing in?
I built an outdoor work bench for outside of my shop this summer.
I bring it in, As there is no way, I'm working outside for 6 months here, Michigan anyways..😮
Have a Jesus filled day everyone Greg in Michigan
Thank you Greg, It will stay outside, no room inside. I will remove the leg vise when I am not using it. Stay warm up there, Merry Christmas.
@RRINTHESHOP
No room inside?
Is there another shop expansion series on the horizon? 😂😅
No plan right now. Thanks Greg.
That's going to be a very useful table Randy!
Thanks Greg. i am lovin it now. Merry Christmas.
Spray that with surface shield. Home depot has it. I put that sh** on everything.
Thank for the tip, I will look into that. Merry Christmas.
👍🏻👍🏻👍🏻👍🏻👍🏻👋
Thank you Gib, Merry Christmas.
@@RRINTHESHOP Merry Christmas to you as well!
That is really nice. Looks like good weather. I'm planning to do lots of work in my shop this winter. Well done Randy.
Thanks Randy, this is working out great. Merry Christmas.
Awe yes, Anchor Lube ( I am still hording my bottle Stan left on his and Phill's quick vist back in March :-). 1:48 in, my twin punch to yours has vanished in my shop after 30 + years ! Like good shepherd that lost one sheep of 99,,,I will not rest till it's found and back in it's place,,,hehe! A thought, for the protection from the elements, let ole Bear sew you up some water prof cover's?? Be glad to! Happy to see you are not standing in any snow yet (@@)! Bear
Anchor lube sure is handy when you don't want oil all over. No snow yet Bear. Merry Christmas, Thank you for stopping in.
Great show Randy!
Thank you Phil. Merry Christmas.
Nice outdoor work shop. That blue vice looks like it needs care how it's used. No large power bending of things, no hard bangings. Of course You know how and for what it can be used.
Thanks you Stefan, Merry Christmas.
Awesome, I'd really like an outdoor bench for dirty jobs.
I love having an outside bench. Well worth the effort to build one. Thank you for watching. HNY.
Nice combo Randythree . All three in easy reach, I'll be thinking about you next time I am stumped for an easy setup, cheers!
Thank you Howder, This is working out great, lots of options. Merry Christmas.
Ready for work. 👍
For sure Tom. Thank you for the Christmas Card, Merry Christmas, Sure good to see you back in your shop.
Thanks Randy and your welcome.@@RRINTHESHOP