Це відео не доступне.
Перепрошуємо.
BMW 2002 Roundie: Installing a new tail panel on my $800 1970 BMW 2002 E10.
Вставка
- Опубліковано 4 кві 2020
- Hey everyone! Join me as I introduce my latest car project and also cover my installation of a new rear tail panel on this vintage BMW!
When I purchased this 1970 BMW 2002 about two years ago, it had the wrong style rear tail panel with the rectangular style brake lights instead of the round ones. Either the car had a fender bender and this was all they could find at the time, or maybe someone actually thought the rectangular style of the later models was an "upgrade". While I actually really like the later model rear end cars, for this 1970 model, I had to go back to the "roundie" rear tail panel.
So about a year and a half ago, I cut off the old year end and purchased a brand new rear "roundie" style panel. The car mainly just sat in my garage ever since. In this video, I attempt to install the new rear panel in just three evenings of work. My goal was to get it ready for the upcoming BMW Cars and Coffee event here in the Portland, Oregon area. Do I success in my endeavors? Watch the video to find out!
Links for products used in this video:
** Hobart 500559 Handler 140 MIG Welder 115V
-- Short Amazon.com Link: amzn.to/2wbcTBo
** Small cart for welder listed above.
-- Short Amazon.com Link: amzn.to/2JHmp2y
** Weld Thru Primer
-- Short Amazon.com Link: amzn.to/2Xb29hu
** 2K Epoxy Primer (the good stuff)
-- Short Amazon.com Link: amzn.to/34axna5
** Three Step POR 15 Rust Stop & Prevention Kit
-- Short Amazon.com Link: amzn.to/2JBBbb0
** Black Hawk Strip Discs for Paint, Bondo, and Rust Removal (These things work great!)
-- Short Amazon.com Link: amzn.to/34dqW5X
** 3" Wire Cup Cone Brush Grinder Attachment (Great for removing paint and rust on un-even surfaces!)
-- Short Amazon.com Link: amzn.to/39IJpsr
** For my grinder, I really recommend my Harbor Freight HERCULES
Corded 4-1/2 In. 11 Amp Professional Paddle Switch Angle Grinder. This thing is awesome and has tons of power. With grinders, it's the amps that matter. Don't mess around with the little 5 or 6 amp grinders, get something with a manly amount of torque. As far as what you can easily buy on Amazon, I would recommend the Dewalt DWE402 11-Amp Angle Grinder. It's build to last and has great reviews.
-- Short Amazon.com Link: amzn.to/2xRldXq
The ultimate driving machine!!
I like your solutions!
I am impressed, that you converted the 1972 BMW,2002 from square tail lights to the round,ones that is quite impressive,👍👍👍👍👍
Thanks man! It was actually a 1970 BMW 2002. I was originally a roundie that someone else had converted to square brake lights at some point.... I think in the '80s.
Wow this is amazing!
Hi Hakan here from Sweden, like your project and i wish you good luck with everything.
I have 3 02: cars and a few other old Beamers.
Im sure there are some good supliers of the metsl parts you need.
I bye most of my stuf directly from germany, deasent pricing.
The web store is called
Wallot Nesch bmw parts.
They have a lot of the hard to find parts.
Id put a link to a UA-cam vid of a few of my o2:s
Hakan
ua-cam.com/video/l7x-2IJ0IhU/v-deo.html
Hey I'm restoring a 1973 2002tii Agave green and looking for nice sun visors Do you know of a source? I needed a nose, one door and new trunk panel Pre galvanized cars can be sooooo rusty!!!
Thanks Man!
Congrats 😍
Always love seeing other channels do 2002 stuff. Subscribed!
Thanks man!
Nice job, though the trunk floor is going to need attention at the rear edge. Always liked 2002s since our neighbor got one back in 1970 over so.
Well done man! Had no idea you were filming the whole process
Thanks Man!!!!
great find! pretty insane that you got an early model with the sunroof for only 800 bucks
Thanks! I know right?!?
Awesome project!
Thanks Miguel!
Good job mate! Looking forward to see it progress.
Thank you!!!!
Another solid video. Well done.
Much appreciated!
Awesome video! I live in Seattle and have a 76 I’m slowly reviving... wondering if you would be interested in parting with those square taillights? Let me know and keep up the good work!
Any thoughts on those tail lights?
@@zaeos Hello! I've sold some of my square style rear tail lights already. I still have one pair that I am holding on to for the moment. Thanks! If I ever list them, I will put it on my Instagram story. Follow me at @LowKeyBuilds
Hello! I've sold some of my square style rear tail lights already. I still have one pair that I am holding on to for the moment. Thanks! If I ever list them, I will put it on my Instagram story. Follow me at @LowKeyBuilds
Is that 2002,alphine White, it would look nice all white the other colors I was thinking that blue that you have or even an orange,
Hi, I would like to do the same but I can’t find the rear panel. Could you let me know where it can be found please ? Thanks
I was able to order it directly from BMW. Not sure if they are still available or not.
those shope light diffuser in the back? gotta a name or a link?
Thanks for the inspiration, I just got a 74 tii in decent shape. So you found that flapper disc better than any other disc for grinding and stripping? tia NMDerek
Rad!!!
Thanks Ben!!!
Where can I buy this rear round panel?
I bought mine directly from BMW.
Where get rear tail panel
I ordered it directly from BMW.
This is the video I needed to see! I am in the process of converting mine to a roundie. my roundie is a goner but the tail panel is going to get used on my square tail. Don't judge! Did you cut directly in the indent mark on the tail? This will be my first time cutting and welding but I am going to practice on some scrap parts. By the way, you got a sub from me! Thanks for this video.
Also, it looks like you cut the whole panel out. The part you cut out that protrudes, is that where the panel meets the trunk floor? Any tips and/or suggestions when doing this? I will be cutting my roundie and square tail for this swap.
@@stevenandchey6172 Hey Steven! Correct. I cut the entire panel out. At first, I only cut out the top section, but I ended up cutting out the entire panel later. For the sides, I cut about 2 inches from the actual seam. Then I went back and carefully trimmed, with the side of the grinder... feathering the metal until to leave enough to weld back on. It's still not perfect. Stay tuned for my next video where I'm going to be finishing it!
1970???? How can a 70 have square taillights?
I think someone converted it to square back end sometime in the 1980's. They did some crazy stuff back then. I put it back to a roundie.... like it should have been.
Verry rusty indeed these floor panels good luck in your project to!
Thanks man!!!!