FMS has finally stepped UP their game! Over a year ago, servos were plastic gear, analog. NOW everything (that has been upgraded to the useless to ME, reflex v2), they upgraded their electronics! (I always yank the reflex's out. If u need a free reflex, LMK!😝). I've liked fms since my 1st plane, the super ez. 👍
Hi Rich - where are you going to show the flight of this? I just purchased everything to copy your setup so I am counting down the days until you post how it flys!
Yes it is sufficient. Sometimes testing something like this it's a good idea to have a separate power system for the receiver, in case something happens to the power system...
Rich I did find out what was causing the beeping on this ESC, there's 3 plugs on this ESC. Throttle, rev throttle and programme plug. I had to plug the yellow rev throttle cable into a spare port in the RX for the beeps to stop and have the motor work. However if u don't want Rev thrust you STILL NEED it plugged in. Means I need a 7 ch RX which is a bummer as I only have 1x 10ch. Did you need to also plug the rev thrust plug into a ch too? I couldnt see your RX close enough. Cheers
Aahahahahah! The Go Get Em Wire? Amount of times Ive spent shaking an Rattling for the Wires, Lol! Beauty Richardo. Only found out recent, Your a Pilot.
Hi Rich, Can you please show the location of the CG on scorpion in one of your videos? The manual is a bit confusing as it is not clear whether it is measured from where wings attach to the wing root (already part of the fuse) or is from the actual wing root where it meets the fuse. Really appreciate it. Hassan
So I just bought one and I took out the esc and it actually already has the upgrade 120 amp 8s esc. It also has a different motor in it, it’s a inrunner 3670. Any reason why this is?
@@eqrc7587 Cheaters can rob clean Flow, Backdraft, cavitation an Eddy suck? EQ, My Man, stay semi angry Mate. Cocks running the show down here are pure Evil.
Rich I'm not sure if you could help me on an issue with this 120A esc? I've installed it into my Eflite 90mm viper and all I'm getting is a beeping every 1 second. Their trouble shoot says it could be input voltage is too high but im using 2x4s lipos and I'm getting the 8 beeps at the beginning. After that it's just them beeps every second. All the control surfaces work just no power to the motor. Calibrations been done. Any help is appreciated. Cheers.
Tried lowering to -20, then calibrated the throttle again but still regular 1 second beeps. I tried a 6s lipo, 6 beeps then the same beeping as when I uses the 2x4s lipos.
Hey, Rich! I have been working on modifying a 70mm F16 from Freewing. I did not change the weight or distribution or CG or power system with my modifications. The only difference besides swapping nozzles, is a larger battery. I used to have a manageable 6:7 thrust to weigh ratio. Now it is 3:5 thrust to weight. The weight did change switching from 4000 mah to 4500 mah, but not much. The point is I need to lose weight in battery size or get more power. I'm using a FMS 3060 - KV 1900 in runner with their 12 blade fan assembly and 80A Predator ESC. It is getting me 2 lb 15 oz to 3 lb 1 oz of thrust. The plane weighs around 5 pounds with the 4500 mah pack. Do you know of any better performing power systems? I'd love a 4-5 minute max flight time. I was really pushing my 4000 packs with that time frame and lost some batteries (but luckily made it safe to the runway with no taxi power) that way. I could settle for lighter packs and just fly shorter flights, but there must be some other options right?
@@RCINFORMER yeah. I definitely understand that... I need some light batteries anyway for some more aggressive flight styles anyway. I was really hoping the 4500's weren't too heavy, but I guess that was a little ambitious.
Get your FMS 90mm SUPER SCORPION at Horizon Hobby Here NOW with V2.0 REFLEX stabilizer included!► bit.ly/3ghoCBR FMS 90MM 12-BLADE 8S PRO METAL FAN WITH 4075-KV1500 MOTOR► bit.ly/3GnkGtO FMS 120amp 3s to 8s ESC► bit.ly/3eqplPk APEX LIPO 400mm STRAPS & AMAS XT90 ANTI-SPARK connectors at my AMAZON store under electronics► www.amazon.com/shop/rcinformer
Too much Too much Too much.....is never enough!! 🤓🤣
Great video Rich.
AirHammer out!!
☃️ Hello 👋. Saving to watch later. Looked at this plane whin it came out. Still do not have a EDF.
FMS has finally stepped UP their game! Over a year ago, servos were plastic gear, analog. NOW everything (that has been upgraded to the useless to ME, reflex v2), they upgraded their electronics! (I always yank the reflex's out. If u need a free reflex, LMK!😝). I've liked fms since my 1st plane, the super ez. 👍
ROCKET 🚀 POWER
Been wanting to do this to the Viper 90mm as well… looking forward to the flight!
33, Raymondo Mate!
Hi Rich - where are you going to show the flight of this? I just purchased everything to copy your setup so I am counting down the days until you post how it flys!
Hi Rich, is the power increase noticeable? I'm on the edge to do the same thing with my super scorpion. Thank in advance for your reply.
Rich when you changed the esc to the 120A was there any need to add the additional BEC to it? Isn't the inbuilt one sufficient? Cheers
Yes it is sufficient. Sometimes testing something like this it's a good idea to have a separate power system for the receiver, in case something happens to the power system...
@@RCINFORMER thanks Rich. Are all additional BEC needing soldering into thr main wires or can they be plugged into an additional port?
Rich I did find out what was causing the beeping on this ESC, there's 3 plugs on this ESC. Throttle, rev throttle and programme plug. I had to plug the yellow rev throttle cable into a spare port in the RX for the beeps to stop and have the motor work. However if u don't want Rev thrust you STILL NEED it plugged in. Means I need a 7 ch RX which is a bummer as I only have 1x 10ch. Did you need to also plug the rev thrust plug into a ch too? I couldnt see your RX close enough. Cheers
Hi Rich
Where is the 8s Flight of the Scorpion Have you done it yet Cheers
Aahahahahah!
The Go Get Em Wire?
Amount of times Ive spent shaking an Rattling for the Wires, Lol!
Beauty Richardo. Only found out recent, Your a Pilot.
I'm really considering this as a possible next jet.
It is sweet! check out the other videos I made, it is excellent on 6s & the link I added has the new REFLEX stabilizer included!
My wife said "Dude, it's a total sti in there". 😁🤣😁
It's a controlled chaos! almost like meatball surgery however a lot of stuff gets done in my shop... sometimes there's no time to clean up
@@RCINFORMER I know I love it.
Phenomenal video -- super informative. Greatly appreciated. 👍🤠
Hi Rich, Can you please show the location of the CG on scorpion in one of your videos? The manual is a bit confusing as it is not clear whether it is measured from where wings attach to the wing root (already part of the fuse) or is from the actual wing root where it meets the fuse. Really appreciate it. Hassan
Ok,will do during the flight:)
Can I get a link to the flight
So I just bought one and I took out the esc and it actually already has the upgrade 120 amp 8s esc. It also has a different motor in it, it’s a inrunner 3670. Any reason why this is?
Not sure, what is the motor kv
@@RCINFORMER 1950
@@Rcguy2591 probably to high for 8s. However, you would only need to change the fan now to go 8s :)
Great job Rich !!! She should be a beast👍🏻✌🏻🖖🏻
Hey Eric! We'll find out this weekend:)
You think maybe a cheater vent might be in future if it seems to need it.
Good idea! I was thinking about possibly adding that.
@@eqrc7587 Cheaters can rob clean Flow, Backdraft, cavitation an Eddy suck?
EQ, My Man, stay semi angry Mate. Cocks running the show down here are pure Evil.
Rich I'm not sure if you could help me on an issue with this 120A esc? I've installed it into my Eflite 90mm viper and all I'm getting is a beeping every 1 second. Their trouble shoot says it could be input voltage is too high but im using 2x4s lipos and I'm getting the 8 beeps at the beginning. After that it's just them beeps every second. All the control surfaces work just no power to the motor. Calibrations been done. Any help is appreciated. Cheers.
Try lowering your throttle TRIM, then recalibrate and see if expanding the throttle range makes it boot. which radio are you using?
@@RCINFORMER using the NX10. How much would you say I should lower the throttle trim by?
Tried lowering to -20, then calibrated the throttle again but still regular 1 second beeps. I tried a 6s lipo, 6 beeps then the same beeping as when I uses the 2x4s lipos.
what was the top speed you reached??
I hit 134:)
You can also change your amp to an 160amp esc castle creation and you'll be able to run 9 and 10s aswell with that fms 1500kv 💪
I'm surprised there's not rats breeding in there. 🤣😜🤣
Hey, Rich! I have been working on modifying a 70mm F16 from Freewing. I did not change the weight or distribution or CG or power system with my modifications. The only difference besides swapping nozzles, is a larger battery. I used to have a manageable 6:7 thrust to weigh ratio. Now it is 3:5 thrust to weight. The weight did change switching from 4000 mah to 4500 mah, but not much. The point is I need to lose weight in battery size or get more power. I'm using a FMS 3060 - KV 1900 in runner with their 12 blade fan assembly and 80A Predator ESC. It is getting me 2 lb 15 oz to 3 lb 1 oz of thrust. The plane weighs around 5 pounds with the 4500 mah pack. Do you know of any better performing power systems? I'd love a 4-5 minute max flight time. I was really pushing my 4000 packs with that time frame and lost some batteries (but luckily made it safe to the runway with no taxi power) that way. I could settle for lighter packs and just fly shorter flights, but there must be some other options right?
Mostly just modulate you throttle. It's hard to get more than a few minutes out of any EDF.
@@RCINFORMER yeah. I definitely understand that... I need some light batteries anyway for some more aggressive flight styles anyway. I was really hoping the 4500's weren't too heavy, but I guess that was a little ambitious.
@@cwwisk
Danny with SMC has some nice lighter packs that perform better than some other brands that weigh more.
@@trullmann thanks a bunch! I'll look into those!
@@trullmann yeah get some of his HV packs if your plane can take it. Those rock.
👏👏👏
Get your FMS 90mm SUPER SCORPION at Horizon Hobby Here NOW with V2.0 REFLEX stabilizer included!► bit.ly/3ghoCBR
FMS 90MM 12-BLADE 8S PRO METAL FAN WITH 4075-KV1500 MOTOR► bit.ly/3GnkGtO
FMS 120amp 3s to 8s ESC► bit.ly/3eqplPk
APEX LIPO 400mm STRAPS & AMAS XT90 ANTI-SPARK connectors at my AMAZON store under electronics► www.amazon.com/shop/rcinformer
yehaw
Vrooooooooommmmmmmm!!!!!