I had the black screen issue but my dash clock under the mfd worked fine still. I found out from my manual that there were two micro fuses that correspond to the mfd (under parking brake like you show). I replaced the 7.5a micro fuse and still had the black screen and then I replaced the 15a micro fuse and that did the trick! My power widows were also on this circuit (according to the manual) and they had been working fine so I was skeptical that this would have been the problem. Upon examining the fuse visually, it was not broken. However, replacing the 15a mirco fuse fixed my digitizer screen! All in all a $6 fix, since I bought a multi pack of micro fuses!
The manual says the fuse controls the power windows, power steering and the touch screen. If only the touch screen isn't working should I assume it's not the fuse?
I think the fuse box is different but the same concept applies, there should be a fuse that goes to that display but you might have to research the fuse diagram for 2017.
Looking at the fuse map here… the fuse you replaced it is responsible for what? The only 7,5a fuses on that fuse box are a no circuit one and an onboard diagnosis system…. Nothing is related to audio
I don't remember but here is the website www.justanswer.com/toyota/4x8b1-toyota-prius-radio-2005-prius-does-not-work-fuse.html cabin fuse is 7.5 amp under hood fuse is 15 amp, I had to replace the 7.5 under the dash.
Any idea how to fix the speedometer?? Radio display works. Turn signals. Passenger airbag and of course check engine all work. It's just the speedometer. Not the cluster I believe. It'll sometimes turn on after unplugging and replugging the battery once we turn it off speedometer is gone. Any idea
it may be a fuse or it might be a loose connection. take it to your mechanic and have them look at it, it could be either issue hopefully it's a fuse though.
Wondering if there is a way to repair the gen 3's with the display symptoms shown in the YT video "Toyota Prius Touchscreen Dying !!" ? I haven't made a video of mine doing that yet... though seems to be a 2013 issue primarily from reading online. I've only seen one other comment wasn't and theirs was reported as a 2014.
unfortunately I have not worked with a gen 3 Prius that has this issue :( best of luck and I really hope you figure it out!! I've never heard of a gen 3 display going out before..
pull it with pliers or pull it up carefully with a butter knife WITH CAR OFF. Or they can usually do it for you. Sorry, i am not very active here! hope you found a solution. All fuses are unfortunately different labels depending where you got it or the quality but it's in that same spot regardless. if you still having issues then put a comment on my new videos and I'll help you
What if only some of the things on the display wprks and others dont? Like my Bluetooth doesn't work, back up camera doesn't but radio does????? What coukd be the problem
My display is working but sometimes it jutst reboots and/or lockdown. The screen is working in high temperature, but malfuncs in low temp (like below 30 degree Celsius). Do not know how to fix it.
30 degrees C is still pretty hot? do you mean when it's below freezing? older electronic devices have problems with cold anyways it's to be expected just from the old capacitors and chips and such reacting to the temp change i think
@@arlenemayer5966good question! my 06 is doing the same. radio works but doesn't light up never has and MFD works intermittently...took apart dash everything tight wire wise. replaced new 12v battery, was due maybe battery from 2014. No idea why MFD is so randomly working...when it works its perfect but that is now only 15% of the time..
Might be a bad connection somewhere in the screen yeah:( unless you have a voltage tester and can micro solder, you best bet is to call junk yards or hit eBay for a new used one. New displays are ridiculously expensive.
@@itznayem8441 sorry:( sometimes the display is really and truly dead, because of a problem on the inside of the unit. you might have to get a new one, you can find a used working one on eBay for around $100
Huge help. This is what happened to my car and all it cost was $4 to replace the fuse at autozone. Thanks man
yay!
@@Hubcaps219is that display available for sale... My display works but the previous owner crack many of the buttons
I had the black screen issue but my dash clock under the mfd worked fine still. I found out from my manual that there were two micro fuses that correspond to the mfd (under parking brake like you show). I replaced the 7.5a micro fuse and still had the black screen and then I replaced the 15a micro fuse and that did the trick! My power widows were also on this circuit (according to the manual) and they had been working fine so I was skeptical that this would have been the problem. Upon examining the fuse visually, it was not broken. However, replacing the 15a mirco fuse fixed my digitizer screen! All in all a $6 fix, since I bought a multi pack of micro fuses!
Thank you for your comment. It was very useful.
Do you know which one is the second one?
going through the same type issue, my radio works but lcd digitiser touch doesnt work.
Made me the Hero! Thank you!
Thank you…. It works… I was expecting the worst… thanks again….👍🏿👍👍🏿👍👍🏿👍
Worked for me! Thanks!
The manual says the fuse controls the power windows, power steering and the touch screen. If only the touch screen isn't working should I assume it's not the fuse?
Thank You, Very Fast
Thanks bro. Big help
Thank you so much i will try this 🤞
@@RhesaPhillips hope it helps!💯
Thanks mate 😮
Thanks buddy!
THANK YOU!!!!!!!!!
Just wondering if this would apply to a Prius V 2017 since you're talking about Gen II.
My top display suddenly went black today.
I think the fuse box is different but the same concept applies, there should be a fuse that goes to that display but you might have to research the fuse diagram for 2017.
Looking at the fuse map here… the fuse you replaced it is responsible for what? The only 7,5a fuses on that fuse box are a no circuit one and an onboard diagnosis system…. Nothing is related to audio
I don't remember but here is the website
www.justanswer.com/toyota/4x8b1-toyota-prius-radio-2005-prius-does-not-work-fuse.html
cabin fuse is 7.5 amp under hood fuse is 15 amp, I had to replace the 7.5 under the dash.
You’re a TOP G! 💯
Any idea how to fix the speedometer?? Radio display works. Turn signals. Passenger airbag and of course check engine all work. It's just the speedometer. Not the cluster I believe. It'll sometimes turn on after unplugging and replugging the battery once we turn it off speedometer is gone. Any idea
it may be a fuse or it might be a loose connection. take it to your mechanic and have them look at it, it could be either issue hopefully it's a fuse though.
Wondering if there is a way to repair the gen 3's with the display symptoms shown in the YT video "Toyota Prius Touchscreen Dying !!" ? I haven't made a video of mine doing that yet... though seems to be a 2013 issue primarily from reading online. I've only seen one other comment wasn't and theirs was reported as a 2014.
unfortunately I have not worked with a gen 3 Prius that has this issue :( best of luck and I really hope you figure it out!! I've never heard of a gen 3 display going out before..
I don’t have that blue wire, so you happen to know what that wire does?
Install the blue fuse
Which one did you replace? The one labeled panel? Only my screen isn’t working so wondering which one to try thank you
Also how do you take a fuse off?
pull it with pliers or pull it up carefully with a butter knife WITH CAR OFF. Or they can usually do it for you. Sorry, i am not very active here! hope you found a solution. All fuses are unfortunately different labels depending where you got it or the quality but it's in that same spot regardless. if you still having issues then put a comment on my new videos and I'll help you
What if only some of the things on the display wprks and others dont? Like my Bluetooth doesn't work, back up camera doesn't but radio does????? What coukd be the problem
@@nikicarrie4071 not sure:( you'd have to ask Reddit or a Toyota mechanic
prius display nit working ? Fuse
Thanks
My display is working but sometimes it jutst reboots and/or lockdown. The screen is working in high temperature, but malfuncs in low temp (like below 30 degree Celsius). Do not know how to fix it.
30 degrees C is still pretty hot? do you mean when it's below freezing? older electronic devices have problems with cold anyways it's to be expected just from the old capacitors and chips and such reacting to the temp change i think
I tied to attach it but there is no wire hanging down. I’m a 72 year old female trying to figure this out!! Any help would be appreciated
You fix it yet?
@@Hubcaps219 no. I have been driving my other car
prius display nit working ?
this work with 2009 one?
Looks like, 2009 is a gen 2 Prius unless there are some 2009 gen 3's I'm not aware of.
@@jafinch78 Yes it works to 2009 assuming it is the same issue and praying that the display itself is not dead
Is my display dead on Prius 2011 if I can hear the radio
@@arlenemayer5966good question! my 06 is doing the same. radio works but doesn't light up never has and MFD works intermittently...took apart dash everything tight wire wise. replaced new 12v battery, was due maybe battery from 2014.
No idea why MFD is so randomly working...when it works its perfect but that is now only 15% of the time..
Hey, my screen just started cutting out. But, It looks like the clock is still there. Do you think this might be a symptom of the fuse going bad?
Yes
@@Hubcaps219I tried it out. Sadly it didn’t work. I think the screen is dying off
Might be a bad connection somewhere in the screen yeah:( unless you have a voltage tester and can micro solder, you best bet is to call junk yards or hit eBay for a new used one. New displays are ridiculously expensive.
What if my clock works and CD buttons and the only synptom is a black screen? Is it just bad?
had the same issue like you described. I had to go for a replacement mfd unit, plug and play it worked. Did cost me around 300 USD.
Bad screen
How do you know they are good??
Put a multimeter on it or just buy a new one and replace it!
this is the correct answer. fuses are cheap anyways, just replace it if you don't have a voltage tester and hopefully it'll work.
the fuse is #6 and shares with the power windows ... the windows are working but the screen is dark. What to do?
Year?
My MFD has the same issue.
might be a 12 volt battery issue try jumping the car and leaving it running for a little while
But mine turn on and off and the clock and the radio works even when the screen is not
Bad wire plug connection. get a friend who knows about wiring and have him/her look at it
I watched the video but my fuse panel looks different
Reddit
Thi won't work on 2010 pruis n up its a different
Спасибо брат!
Что он сделал?
У меня не работает так же
@@Высшийразум-б9бПоставил предохранитель и монитор заработал у меня.
без проблем
Didn’t work
@@itznayem8441 sorry:( sometimes the display is really and truly dead, because of a problem on the inside of the unit. you might have to get a new one, you can find a used working one on eBay for around $100