Creative Woodworking: Building a TV Stand with Built-in Speakers from Pallet Wood
Вставка
- Опубліковано 6 лют 2024
- ★ Contact Me:manhthanhha2@gmail.com
Join us on a woodworking adventure as we combine functionality and creativity to craft a unique TV stand with integrated speakers using pallet wood. Follow along as we demonstrate step-by-step instructions, turning reclaimed materials into a stylish and convenient home entertainment solution. From design to assembly, discover the beauty of DIY craftsmanship while adding a touch of innovation to your living space. Get inspired and learn how to elevate your home decor with this DIY project
Do you have an idea, a project to work on or a proposal? Please leave a comment below. We will do it for you.
★Thank for watching!
★Please like, share, and subscribe our Channel here : bit.ly/2RtjjlT
#WoodworkingSkill - Навчання та стиль
As a technician and audio system lover, I was prepared to write every bad thing in a long paragraph. but because I saw the name of this channel I deleted everything... Nice woodworking mate!
Прикольно, напоминает приемники из Союза.Молодец!!!
С точки зрения построения акустики сделано не верно, с точки зрения красоты да респект за работу.
с любой точки это полная шляпа)
Well, the box isn't damped either, and I don't see a crossover for the speakers, and there isn't even a rubber under the bass and it isn't even hermetically sealed... It's nice, but NOT GOOD !!!
It's nice, but NOT GOOD
Yup, I've been thinking about the most appropriate sentence and you've said it.
Good job, considering the starting timber. You didn't spray underneath the cabinet during the video, perhaps you did it later. And you should give the inside/underneath the same number of coats as the outside/top. This lessens the chance of uneven moisture absorption with atmospheric change. If it's always going to be in air-conditioned premises, less consideration of this is needed..
Greetings from Mexico.
AWESOME PROJECT!!
Sensacional meu amigo, belo trabalho, vai Corinthians
Só esqueceu de deixa um buraco pra saída do som de dentro da caixa 🙆🏻♂️
Terima kasih sudah berbagi ilmunya 👍👍👍👍 semoga sukses selalu. Di tunggu kehadirannya kak
As a custom built piece of furniture, outstanding job.
As a device for audio reproduction?
Mistakes are a vital part of learning.
So your next endevor will certainly employ some of the things you leanred from this creation.
Awesome Job!! Great Craftsmanship! Excellent Detailed Video. I Liked The Recycled Pallet Wood. 👍👌👏👏 I Would Of Used Some Foam in The Speaker Box and Applied Caulking Inside Joints. Other Than That Loved Your Project! ❤💡👏👏
Excelent Job...Congratulations.😊
You're incredibly resilient and strong.
It is a bad idea to install the tweeters on the sides, it can never sound good. The sound box is also out of proportion to the woofers.
❤😮😮❤
You can see that he doesn't understand the construction of sound boxes, and those boxes are small, and he could have put the tweeters in the front corners, up left and right...
cadevocemenina
Хорошее паралитическое оружие против злых соседей создал! Спасибо за видео. Мой лайк!
Very best results and I am very proud of your work,
Always success for hard workers like you,👍
Если бы я так щиты склеиват, то такую подзатрещину бы от отца получил😂
Treble ko để phía trước mà để bên hong 😂😂😂
And it should have been made of mediapan, not wood, and I think the bass reflex tube for such a bass is also missing...
Wood is fine. Most of your high end sub enclosures and pa speakers are made of wood. Mdf is also fine it's all about wood density.. as for the tube it doesn't need it for the application all it would do I make the bass sloppy. Having it enclosed will keep it tight and neat.. those tweeters need to be moved though. Sound damping the box will force the sound forward
Although there is many mistakes .. but generally it is a very good job ... thanks
I guess for something that is intended to be cheap it's ok.
The things that triggered me:
1. Splotchy runny application of the poly.
2. Pencil marks not sanded away.
3. No speaker batt installed.
4. No vent hole in the speaker to improve bass range.
5. (I may be mistaken on this one) It looked like the speakers were wired in opposition, which will seriously affect quality of sound.
6. The back isn't removable, you nailed it in.
7. No ventilation to allow the heat from the amp to escape.
8. The power cord was wired in, and isn't detachable.
9. Antenna connection should have been externalized out the back..
10. No externalized rear facing inputs/outputs, all connections are front facing.
11. Even after the poly, the damn thing was a splinter factory, should have spent time filling holes, and more time planning cuts to avoid any forward, top, or side surfaces from having chewed up wood (I'm ok with back and bottom sides being ignored, I won't normally be putting my hands, brushing up against those particular sides).
13. The construction of the non-removable panel guarantees rattle at certain frequencies.
you forget the air hole broo
Mantap saya salut dan kagum kreatif anda
Nice idea, but as said before tweeters at the sides are a poor design, and also the large woofers would benefit from being ported in their enclosures, forward facing, or rear to the wall, otherwise it looks very nice
Como carpintero eres genial ,pero como electronico de sonido , mmmmm, te falta mucho..saludos..😊
Insonorizante dentro!!!
Parabéns show muito criativo. Brasil
Exquisite, I love it when you build things with pallet wood!! It looks amazing, the craftsmanship from what I can see is awesome. Are you going to make a cd/dvd case from pallet wood to match? ❤😊❤, Dona USA
how this fella still has is all his fingers is beyond me
Tôi đã sem từ đầu đến cuối những có hai điều tôi sin góp ý là nên bôi keo vào khi lắp đằng sau và nên có hai lỗ thông hơi ở đằng sau
Bagus. Pingin.❤
haha good style! great !
Salam knal
Dari palembang 🙏🏾🙏🏾
Muy buen trabajo, pero se podría mejorar, los cables podrían haber sido más largos y estar recogidos , pegados al fondo del mueble y haber hecho que se pudiera habrir el fondo para cualquier reparación.
Holzarbeit, sehr Cool, Verkabelung, Dämmung, ect: Typisch Made in China außen Hui innen Pfui aber Tolles Projekt.
Все норм, но задняя стенка очень тонкая, герметик нужен, и наполнитель типа синтепон, почуть
atrás la tapa debió ser un solo cuerpo y desempotrable con tornillos y no grapas
Это видео о том как плотник решил себе колонку замутить????
Os drivers na lateral ficou muito esquisito pra o som foi o único erro do projeto aí no mais focou muito bom
Hi, where I can find this audio amplifier? pls link
красота, было бы неплохо, если бы ссылки прилогались на оборудование
love it 👍👍
Тема интересная , но звук как из унитаза , вч драйверы в бока это полный бред , задняя стенка набор деревяшек .
Te faltó publicar medidas
Link for the amplifier?
Good job🤝👍
No networking, no soundproofing?
3f0f300003000300000000v
joli meuble super bravo
Só faltou o dulto de ar mais ficou muito bom
Vous ne donnez pas les mesures exactes mais c'est très intéressant beau travail
It is a very bad idea to point the tweeters to the side.
(Write Turned s hanger for pining with tesl. a)
Повезло тебе. У тебя новые пальцы быстро вырастают, когда их пилой случайно отпилил. У остальных не так(((
nice
Пишалки в стороны направил. На этом можно заканчивать просмотр видео.
Красиво, но к звуку ни какого отношения эта тумбочка не имеет
Я бы сказал чисто дачный вариант на второй этаж бани поставить норм
@@dedinside9 язык не поворачивается этот набор палок назвать красиво )))
@@Kosenko_Yaroslav ты видел как он провода внутри распихал)))) куда красивше то!
where is the soundproofing?
Высокочастотным динамикам по бокам делать нечего. Они должны быть в переди.
Ну зачем же длинную доску с короткой склеивать?!!
Задумка неплохая, реализация фуфло. Зачем твитеры с боков? Вы бы их еще сзади приделали или в низ😂
Нужно спереди, либо широкополосные динамики использовать. А это баловство, только радио включать для фонового звука
Проклеивают корпус перед сборкой , а не на гвозди колотят
Минусы всем очевидны, но фишка в том, что можно сделать симпотную весчь из старых поддонов за пару часов не отходя от дома..
а еще вы забыли напомнить , что давно придуманы фазоинверторы, очень полезная "дырка" в аудио ящиках.....
@@user-cb8mv9rt8j
А ещё забыли вспомнить "музыкальную ель" как обязательный атрибут акустики...
Человек явно не в ладах со звуком, но за работу с деревом однозначный лайк
@@akhromov63
У него цель не hi end, a дизайн и он её достиг...
Se nota que no sabe mucho de sonido
Solo hiso el trabajo para mostrar las herramientas
Se puede hacer con menos cosas
Trabajo excelente...pero sonido.......
Что бы не городить.такую
Тумбу можно к колонкам такую же коробку касетник тюнер усилок сверху вертушку слава богу додумались делать их плоскими ну об двди как то отпало само собой хотя как то коль все так все..удачи всем думаю многие думали но вот современные производители мебели как то хотя новая мебель не знаю чья она Томская что-ли позволяет втулить все это .
우와 ㅋ
Как мебель норм, как стереосистема ноль, хотя и как мебель не очень аккуратно, можно было лучше сделать
👏👏👏
Faltou ventilação no grave...
12.2
Hino quality
4.10
12.2.4/10
Gum dril screw fixed Kingston current pole
Made in Vietnam .
Клеймы где фазо инвеотора нет
Верните мне мои 47 минут
И стоило столько махаться? Из фанеры быстрее.
👍
Корпус?
👏👏👏🇧🇷🇧🇷
Pang halo halo
Вот ты же не по своей парадигме идешь, а по моей, раз я сиотрю, т скрываешь, тех, кем гордишься, но раз сиоьрю, значит ты под мою дудку рляшешь, ьебе это надо, значит я же не обижаюсь, значтт вы обиженые с козырями, радуетесь там в обиде❤
Комод с динамиками.
So a XXXL Boombox..
Корпус из толстых досок,а заднюю стенку из тонюсенькие,и вч динамики в бок ,кто так делает,колхозник одним словом
Так себе звук.Ни низких ,ни высоких частот .Среднее что то молотит.И ради такого стоило заморачиваться ?
Столько труда , чтобы в итоге это не звучало как надо , это конечно дорогого стоит ! А звучать эта конструкция точно не будет ! Понимания ,что такое акустика у парня нет ,от слова совсем . Все неправильно от А до Я ! Лайк за труды его !
Третий сорт не брак
Сделано на тяп ляп
так все криво, щели ппц, внутри ватин не положил, звук наверно как в ведре
Dia tukang kayu bukan tukang sound system
Конечно красиво, но звук лютое говно...... Вообще без расчетов без демпфирования. Похер. А мебель хорошая получилась....😅
wood 5:12
🌹🌹🌹🌹🌹❤️
🤣🤣 ТАКОЙ ХЛАМ
Cr 2:23
You are not thorough enough. Don't you need Soldering or sound absorbing material, I think these are need.
Just right!!!!
Now the sound have much armonikes,and is hard😢
😊😊
👍👍👍👍👍👍👍👍👍👍
37:12 та пищалки на боку це взагалі - жах
普通だ オレのほうがうまい
🤣
🏃 Promo sm
One word: CRAP
❤😂etafeRDR
Очень сомнительно всё во первых нахрена делать моноблок таких размеров? Носить его не представится возможным учитывая что питание будет только от сети . Можно было на этих компонентах собрать вполне не плохую стационарную систему . А во вторых сделать высокочастотную составляющую по бокам это верх идиотизма так как из-за такой компоновки высоких частот не будет слышно от слова совсем! Их будут забивать низкочастотные динамики расположенные на фронте. Чела который делал этот шлак считаю не компетентным в этом деле потому что он абсолютно не понимает как должна звучать нормальная техника стерео формата 👎👎👎
Это саундбар под телевизор
@@akhromov63 я понимаю что саундбар но на этих компонентах во первых останешься без ушей во вторых для таких динамиков корпус явно мал да и в третьих расположение динамиков явно перепутал автор вч должны смотреть и играть непосредственно в перед а не куда то там не понятно куда
@@user-wg4vz7yb8m почему без ушей - не ясно.
Как вы определили, что корпус маловат?
По поводу твитеров, согласен. Человек далёк от звука.
@@akhromov63 почему без ушей? Динамики явно по мощности больше 200 ватт а так как это саунд бар то далеко не осядешь чтобы без последствий слушать в формате стерео а раз автор поставил именно их то не думаю что он влупил безумно мощные динамики чтобы слушать их тихо и именно поэтому же и корпус для таких мощных динамиков мал
nul, zéro, minable ! ça doit sonner comme un tonneau...
Tweeter sidil ano vekkunnath pottaa 😂😂😂
Хороший плотник, но не аккустик. Очень много вопросов. Надо было бы хорошую литературу почитать по изготовлению и настройке аккустическиз систем. Никогда не помешает учиться.