@@LearnYourCNC Sweet. I will probably sign up in Jan. Holidays will be done and my wife is due so i will be home for a while. Be a good class to take. I love vcarve and your channel already.
GREAT explanation, a little bit more than I needed, but I was searching for a way to set the thickness as a variable, and not need to get into each toolpath and change the cut of depth when the material changes. This was the EXACT answer I needed! Thanks!!
Your videos are a step above my friend. Your ability to communicate and teach are amazing. Are you affiliated with Vactric? I get the impression you are just an end user that has a superior grasp of the software. I would suggest Vectric take a look at you to teach people their products. Well thank you for the videos they are awesome I am learning all sorts of things watching your videos.
I often use the variables that you shared but don't know all of them. So appreciate you sending me the sheet - I followed your link. One tip that you gave that I have been frustrated with is how often the variable for thickness disappears and the actual thickness gets put in. i will use your trick of using the variable and then adding "0".
Can a single tool path be used on varying thickness materials? e.g. I want a pocket that always has a .25" bottom thickness but my material might be 1" or 3/4" or 1.2 inches.
This is great when working with sheets. Is there a way of making a default template for just a profile cut without working with sheets? e.g. Start depth 0.0mm Cut - Depth 19.20mm / Tool 1/8 EM / Machine Vectors = Outside / Do Separate last pass 0.20mm / Add ramps Smooth distant 20mm
VCarve Pro does not accept a formula for Tab Thickness, which severely limits the usefulness of variables. Sure, I can automatically update the cut depth but all my tabs will be wrong.
Want to become a PRO at Vectric software? Check out my Vectric Master Training Course >>> go.learnyourcnc.com/3eEP2QS
When it says "Access to future Content" does that mean any future classes you do will be available to use forever?
@@Golfexpertbelieveme that is correct! Any time I add new lessons to the Master Course, all enrolled students get access to it for life.🙌
@@LearnYourCNC Sweet. I will probably sign up in Jan. Holidays will be done and my wife is due so i will be home for a while. Be a good class to take. I love vcarve and your channel already.
GREAT explanation, a little bit more than I needed, but I was searching for a way to set the thickness as a variable, and not need to get into each toolpath and change the cut of depth when the material changes. This was the EXACT answer I needed! Thanks!!
I didn't realize about the t/# without the equal. And I never paid attention to the numbers at the bottom. Thanks a ton for more awesome tips!
You have taught me shortcuts and methods no one else has in the last three years. Outstanding videos.
The z+0 was genius! This will make some jobs that vary in thickness very easy to recalculate just by changing the sheet parameter! Thanks!
Your videos are a step above my friend. Your ability to communicate and teach are amazing. Are you affiliated with Vactric? I get the impression you are just an end user that has a superior grasp of the software. I would suggest Vectric take a look at you to teach people their products. Well thank you for the videos they are awesome I am learning all sorts of things watching your videos.
Thanks, Kyle. This is something I will use. That is a great deal of information in a short period of time. Excellent!!!
I often use the variables that you shared but don't know all of them. So appreciate you sending me the sheet - I followed your link. One tip that you gave that I have been frustrated with is how often the variable for thickness disappears and the actual thickness gets put in. i will use your trick of using the variable and then adding "0".
How did I not know about this!?!? Amazing! Thanks!
So is this type of information in covered in the Masters class or are these topics covered in the live training course?
Can a single tool path be used on varying thickness materials? e.g. I want a pocket that always has a .25" bottom thickness but my material might be 1" or 3/4" or 1.2 inches.
Wow, that is a GREAT tip! I love it.
Can you set up the templates to do z- for all depths?
This is great when working with sheets. Is there a way of making a default template for just a profile cut without working with sheets? e.g. Start depth 0.0mm Cut - Depth 19.20mm / Tool 1/8 EM / Machine Vectors = Outside / Do Separate last pass 0.20mm / Add ramps Smooth distant 20mm
VCarve Pro does not accept a formula for Tab Thickness, which severely limits the usefulness of variables. Sure, I can automatically update the cut depth but all my tabs will be wrong.
Can you use this example in non-pro versions of Vetric?
In non-pro versions, you will not be able to save the toolpaths as a template but everything else will work just as I showed it.
Thanks so much
You're welcome!
Rocking!
Click click click, is it just me or are those the loudest mouse clicks on UA-cam?