Toyota Tazz 1 3 - Basic Service
Вставка
- Опубліковано 5 сер 2024
- website:- www.vehiclemaintenanceandrepa...
To service a Toyota Tazz is very simple, check it out here, subscribe, click the bell icon to be notified of all newly released videos, I would like to hear from you here in the comments section below,
Until the next video, Safe Motoring.
Gary - Авто та транспорт
Even tough i do have some experience on the "basic service", as I have prevouisly serviced my 1995 180i GSE Corolla and also my 1996 2.8D Hilux a lot, I am happy that I have watched your video today as I learned about the heat transfer pipe.
Most of the tazz cars that I saw, does not have that pipe anymore.
I bought a 2005 Tazz 130 two months ago. The car had a smoke far more than this one, but I went on to buy it because of the body interior and exterior that is in a really good condition.
I had a very good mechanic that sort it out for me.
He replaced the valve stem seals and piston rings, obviously quite a few other parts as well, clutch kit, timing belt snd pulleys, etc.
But guys it was worthwile as my car sound even better at the exhaust now, no smoke at all.. and this was done now on 150 000km.
I can't wait to play around with an exhaust system.. 😃
Stay blessed ToyBoys!!
Tnx Garry. I'm happy to see local content. I like your simplicity. Please keep the vids coming.
Great video. Really informative. Please do some vids on tazz. Keep up the good work. Thanks Gary
Thank you for supporting my channel with your visit Justin, I will post more Tazz videos in the future. Gary
Nice sir
this brings back good memories i rebuilt that same motor for my dad from top to bottom back in 1991 but it was a sedan one my dad run the car with no oil and blow no 4 piston through the sump lol big love your cannel
Thanks for supporting my channel with your visit John, thanks for sharing your experience, wishing you an awesome 2021. Gary
Thanks you for the very informative video. Made servicing my taz seem so simple. Love watching your videos..
Thanks for your support Shahied it is great to see my efforts being appreciated.
@@vehiclemaintenanceandrepai3790 sir, may I ask where you're based I'm in Claremont I need coils on my tazz replaced
Mr, you are doing the Lord's work here.
Thank you very much for that comment Matthew I try my best to help others.
Thanks for the video i have learned a lot this is very helpful i have the same car and will service it myself.
That is what my channel is all about to learn and save Bucks, thanks for the support "Eagle".
Another great video thx Gary. Great little cars...
Thanks for supporting my channel with your visit Nico, yes the Tazz are still great cars, reliable and economical, and easy to work on.
Still have my 130 sport bought in 1997. About 225 00km. Will be doing my own service from now on. Thanks for the tutorial
Thank You for supporting my channel with your visit and interaction, I am pleased this video was helpful to you.
Please feel free to check out the rest of my channel by clicking PLAYLISTS www.youtube.com/@vehiclemaintenanceandrepai3790/playlists for more helpful service and repair videos on most makes of cars available here in SOUTH AFRICA,
It is FREE.
Dropping gems here brother, thank you.
Thanks for supporting the channel Abubakar.
...you don't disappoint madala, you're the best.
Thank You for supporting my channel with your visit and interaction, I am pleased this video was helpful to you.
Please feel free to check out the rest of my channel by clicking PLAYLISTS www.youtube.com/@vehiclemaintenanceandrepai3790/playlists for more helpful service and repair videos on most makes of cars available here in SOUTH AFRICA,
It is FREE.
Love the content please keep it coming.
Thanks for the support , Ethan. Gary
Thank you for this video, i m driving the same tazz and please upload some more video s on the tazz👍
Yes, Maynard, I am about to release one on the Tazz with a blown head gasket, coming up.
Awesome video very informative Sir
👏👍Very informative content, I'm definitely subscribing. In the near future please upload more videos on toyota tazz/conquest 130.
Thanks for supporting my channel with your visit and subscription, Zuzumuzi, it is highly appreciated and yes I will do more Tazz videos. Gary
Thanks for the informative video. Definitely value for my time. Just became a new subscriber 🙏
Thanks for the support, Mduduzi, I am glad the video was of help to you.
Great video Gary , thanks
A great pleasure and thank you for your supporting my channel with your visit Wayne.
Thank u it really help will get a tazz asap.
Thanks for supporting my channel Christo, the Tazz is an awesome basic car to own and cheap to maintain.
Good video.will save me a lot of money. Please do more videos on this car. Brade pads change etc
Thanks for the support Handy Dave, will certainly do so in the future.
This is a good lesson, thank you. Wish to see more lessons on this car...
Thanks for supporting my channel Olebongeng, more videos to follow.
I got a job for I got work for morning my friends got it to your teachers Toyota razz please can you send me your phone
The cars waterfall new jokes
Wiring
Thanks for the video bro very helpful i did it on my tazz and shes performing well on the road but one question what could be the problem if theys no heater only blows cold air?
So I did not make any mistake to my Toyota tazz 1.3 and would like to see more of your videos
Great stuff, I will make more on the Tazz soon.
dankie my bru wow ek gaandie service nou self doen exactly die sameste car, thanx man I did pickup all the little hints in between
Dit is a groot plesier.
Great Video!
Nice and helpful
Good Job!!!
If it is worn rings take a look at a product called compression stabilizer. Has absolutely worked wonders for me on my 2e
I used it in the past, a temporary solution, if rings are worn it needs to be replaced, common sense dictates. Thanks for your input well appreciated. Gary
Nice video for toyota tazz couse i also have one
Thanks for supporting my channel with your visit Jeffrey, I am glad you liked the video.
Good day
I would like to know how I can clean the carburetor without disassembling. While driving, the car chokes, and in my understanding it's probably a little clogged up or something that chokes from time to time.
I've already changed candles, air filters, oils and gasoline
You did that vid on my birthday.. please help me with my tazz too its just not the same anymore
hi can u help pls ,,,,, my tazz heater not blowing hot air it works juast blowing cold air how to fix or do u have some remedies i can try
Nice video ! , I need to get that heat transfer pipe , concertina pipe ?...Please advise ?
Thanks for the informative video it helped me alot, just wanna ask one question how often should I change that heat transfer pipe ?
When it gets damaged to a point it no longer does its job efficiently
Thank You for supporting my channel with your visit and interaction, I am pleased this video was helpful to you.
Please feel free to check out the rest of my channel by clicking PLAYLISTS www.youtube.com/@vehiclemaintenanceandrepai3790/playlists for more helpful service and repair videos on most makes of cars available here in SOUTH AFRICA,
It is FREE.
Good video Sir
Thanks for supporting the channel Turin, it is much appreciated. Gary
Nice videos
Thanks for supporting my channel with your visit, Based, wishing you an awesome 2021. Gary
Lovely vehicles those, just needs the headlights polished a little and the brake fluid changed, and it will be a new vehicle. Biggest problem is that coil, as it is a very expensive item. Had the distributor stolen off a Venture, parked right outside the door, and that was over R12k as parts brand new from Toyota, but luckily I was able to find one from a rolled vehicle at a scrapyard for R1000, and put it in. IIRC R6500 for the body, R4500 for the cap with coil, and R2000 for the rotor, and they did not have them in stock, nor did they have the clamp and the bolt either. Scrapyard came complete with plug leads, clamp and bolt, plus all the hoses, just had to take a 10mm spanner and pliers with to do the removal.
Thanks for you visit and interaction Sean, wishing you an awesome 2021. Gary
Hi my tazz leaks on the plugs and discharge black smoke what could be the problem
DO YOU HAVE A MAJOR SERVICE TOYOTA TAZZ VIDEO OR AT LEAST A PARTS LIST?
Good day Sir my mom asked are you perhaps Gary De La Cruz from Square hill?
Please help me, my Toyota tazz suddenly cuts off after putting petrol in, what could be the cause of this???
No thank you sir you video was very helpful
I am happy the video has value to you Michael, thanks for your support man.
Do you do wiring ?
Any advice on how to change a steering rack on a Citi golf and what are the symptoms of a failing steering rack??
Hello thanks for supporting my channel with your visit, subscribe if you have not yet already, it depends on whether you have power-assisted steering or just a normal one the latter is easier to replace, I do not have a video on my channel yet but do a google search I am sure you will find one there, symptoms are normally hard steering, too much play when moving the steering wheel from side to side and knocking sounds on the suspension due to a badly worn rack or rack ends and excessive tyre wear. I hope this helps wishing you an awesome 2021. Gary
Bro my speedometer stopped working on my toyota conquest 1.3 2e, but all other gusuges work, fuel and heat Guage, please advise to what to look for
The speedo is activated by a cable that connects to the gearbox, it has 2 parts that screw into each other, it is normally the second half that screws into the gearbox that snaps, remove that half, and check, good luck.
Hi, what you advise for when gears is struggling to shift on tazz 1300
If the clutch pedal has no feel until halfway down it could be a clutch master or slave cylinder issue, if not it is in all probability the pressure plate.
Good morning sir. I'm about to pachase a Tazz 1.3, can you please highlight me what are the main things to look at
Hi Thabang, thanks for your continued support, main things are, check for any accident damage, like the gaps between the doors boot and bonnet, it should be even, loose body panels, ensure all lights works. Before start-up, check the oil and water levels, if it is low there could be engine problems, listen for funny noises, also check out this article I wrote on my website.
www.vehiclemaintenanceandrepairs.com/buying-a-car-101/
What does one do when petrol seems not to be getting to the right place, does one replace a petrol pump or is there another problem ?
Hi Lawrence thanks for supporting the channel with your visit, your question is not a simple one, there are many components used in the efficient delivery of fuel, depending on whether it is a fuel injection or carb system. Things like fuel pump could be faulty- not delivering the correct fuel pressure, fuel filter could be blocked, carb could have blocked jets, fuel pressure regulator could be faulty by not allowing the correct quantity of fuel to the system, choke/cold start system may be faulty, fuel lines can be kinked or damaged, fuel injectors could be partially blocked or faulty it must systematically be assessed starting at the most common known causes. I hope this puts you in a more enlightened position. Gary
Good day, Any advice on why My Toyota tazz won’t engage gears, it sometimes struggles to engage gears. I have seen oil leaking from the gearbox, do you think my gearbox probably needs oil ?
Also,
My clutch pedal feels a bit different. It starts to move the car at a very low level before i could lift my foot until a certain point to feel the biting point.
It could be a low oil level, but then it will also have a rumbling noise while driving, it could also be clutch-related, does the pedal travel feel normal or short.
The smoke at the back was darker what does that mean and how to fix it? nice video by the way.
Dark smoke is usually excess fuel burning, carb related, maybe it is flooding.
Hi I have a tazz and there is a loose pipe in front of the radiator. Right hand side, and it seems to go into a filter of some sort that is mounted to the radiator. What is this?
it can only be the overflow pipe, check to see if your overflow is not broken from the radiator filler neck, this happens sometimes.
Hi Gary our tazz has issues at idling, engine cuts out and when the car has run for a while and is obviously hot it wont start again. then after a while it will start, what can i look for ? regards
Hi Philip, the carburettor could be flooding, therefore not idling, too much fuel, then it would not start immediately because the intake is full of unburnt fuel. Leaving it for a while allows the excess fuel to evaporate, allowing the car to then be started.
My carburetor choke died, I've been traying to buy a new one but i only find the one without automatic choke, can you help me get one with automatic choke please.
Sorry, Cecil, these carb cars are redundant and are hard to find, use Google and search there.
Hi my tazz indicators and hazard stopped working
I got a toyota conquest and my rear park lights and dash lights just went off and I have checked the fuse but it just blown and I think it has a wire that is touching the body ..Can you Pease help if I must check the wiring running down driver side to the back if I must do that
Normally I would take it to an auto electrician as I am not one, Edwin.
Thank you sir
i want to do an oil service on my ee100 corolla 2e but not change spark plugs, the reason for that is a mechanic cross thread my nr 2 plug and im afraid the new one wont set if I remove the old one
Best not to remove that plug Len, unless you are prepared to put an insert into that cylinder,
An insert is a short metal tube with the inside thread of a spark plug and an outer thread slightly bigger, the idea is to tap the damaged plug hole to the outer thread of the insert with a special threading tap then the insert is simply screwed in and serves as a permanent fix, as now you can remove the spark plug whenever you need to as locktite is used to permanently hold the outer thread of the insert once screwed in.
I performed this procedure many times over the years but recently I could not find the inserts for sale anymore.
@@vehiclemaintenanceandrepai3790 thats what also thought, but I think I should take the head to a machine shop when I have the money. I also saw that the front crank seal is leaking and I previously saw on facebook of other people with the same problem said not to go aftermarket with those seals
I agree a good quality seal is needed.
Would you ever show how to set co at idle?
Sure, one day.
Hello. Thanks for the informative video. I noticed in my tazz, there is a red sensor/switch right under the upper radiator hose, and a smaller sensor next to it. I replaced the smaller one cos my fan wasn't kicking in. That one was also quite old. I was wondering what that red switch/sensor is? Is that the temp sending unit?
Yes it is
@@vehiclemaintenanceandrepai3790 thanks
Pleasure
@@vehiclemaintenanceandrepai3790 I managed to fix the car, it was a faulty temperature sensor causing the fan to not switch on
I am glad you resolved the issue. THANKS FOR THE FEEDBACK.
Hi , Oil on plugs same engine. any suggestion how to resolve.?
Worn oil rings or valve stem seals.
Sorry did you say rear wheel drive
Hi Sir, really hope you good. I'm having problems with my tazz conquest, its leaking oil a lot, which is causing a knock in the engine. this is going to either break my brearings or block of the engine, what would you suggest I do?
Hi Clayton, if the engine already has a knock (the damage is already done) then it must be overhauled, done correctly this will sort the leaks at the same time.
@@vehiclemaintenanceandrepai3790 thank you so much , will keep you up to date, I need to save up might only do it end of the month.
Thanks, Clayton I cannot wait to see the outcome.
My tazz 1.3 leaking plugs 2 and 4. What is the problem
Worn plug threads as the car is a bit old and it is probably burning oil too.
Hi Gary. How much do you charge for a basic service on the toyota tazz?
Hi Aslam, Approx. R1800 including all service parts, 3 filters, oil, flush and 4 spark plugs.
M driving Toyota Tazz 2E
Oil keeps on spraying from the seal. Different mechanics fitted new seals but still, it leaks. What could be the problem?
Hi Kgothatso, thanks for supporting my channel with your visit, it sounds like there may be too much crankcase pressure causing the seal to blow, it could be caused by a blocked PCV valve or too much sump compression caused by worn pistons. I wish you luck with solving your issue.
Gary
@@vehiclemaintenanceandrepai3790
Thanks for the feedback. I appreciate!.
Anytime, Kgothatso.
❤
Thanks for supporting my channel with your visit, feel free to check out the rest of the channel by clicking PLAYLISTS www.youtube.com/@vehiclemaintenanceandrepai3790/playlists for more useful videos.
Please do a lesson about fixing a Tazz cluster,
If one comes in I will do it, Tshimologo.
hi iam joseph i was sealing cam shaft oil seal my car refuse to start now
Maybe you put the cam belt on wrong, check all the marks line up correctly, Joseph.
i'm talking engine 2e 1.3 tazz
Good day Sir, my conquest 1.3 is stalling when enging is hot, & when i pull over and let it cool down for 5 minutes it moves well until i drive at high speed @140kms p\h, kindly advise what could be the problem
Sounds like the coil, it is situated under the distributor cap, I had a few cases when this happened and replacing the coil sorted the problem.
@@vehiclemaintenanceandrepai3790 ...THANK YOU FOR PROMPT RESPONSE... WILL CHECK
@@Ndzila-pl6qw All good let me know what you found
@@vehiclemaintenanceandrepai3790 ....may i ask do you have a video posted for this (electrical distributor) issue?
@@Ndzila-pl6qw Sorry no.
Can I work with this car as taxi
Hi Gabriel, I cannot see why not, they use it here in Houtbay as taxis all the time, tough reliable engine and economical to run. Gary
But why did you say its a rear wheel drive Sir?
A slip of the tongue Danny, thanks for supporting my channel with your visit/s
Does the fan on this car have different speeds?
No, Kresan not the ones I worked on.
@@vehiclemaintenanceandrepai3790 thanks, so there's only one speed on these fans.
Sorry I'm referring to the radiator fan
Yes, the radiator fan only has 1 speed.
@@vehiclemaintenanceandrepai3790 howsit gents, can u assist me with this same car, 2E motor.
My odometer and speedometer stopped working, please advise if there's an fuse for this or what could be the reason for this
No fuses, it works with a speedo cable, but it could be broken in the casing.
I need engine new
Eish, bad news hey.
Thank You for supporting my channel with your visit and interaction, I am pleased this video was helpful to you.
Please feel free to check out the rest of my channel by clicking PLAYLISTS www.youtube.com/@vehiclemaintenanceandrepai3790/playlists for more helpful service and repair videos on most makes of cars available here in SOUTH AFRICA,
It is FREE.
From vivian
Thank You
its not a rear wheel drive
Front wheel drive not rear
You correct Joe fwd.
Hy
Thank You for supporting my channel with your visit and interaction, I am pleased this video was helpful to you.
Please feel free to check out the rest of my channel by clicking PLAYLISTS www.youtube.com/@vehiclemaintenanceandrepai3790/playlists for more helpful service and repair videos on most makes of cars available here in SOUTH AFRICA,
It is FREE.
Did this man just say that a tazz is rear wheel drive???? 😩🤣
Front wheels buddy, you should know this.
A slip of the tongue buddy with 14 subscribers, big deal
Anyone who has owned or worked on this car will know its a front wheel drive. This can only be a slip of the tongue. Nice video!!! Thanks.