Creality Scan Raptor - Scanning Tips #3 Erasable Target Marker
Вставка
- Опубліковано 31 тра 2024
- I made this target markers mainly for scanning bended steel pipe and find their radius with CR Scan Otter, saving time on removing the markers sticker. The target is raised from object surface so it can be erased by using lasso tool in Creality Scan software.
Here's the link to my markers collection.
Magnetic Erasable Target Marker
skfb.ly/oVCZR
Over object feature
skfb.ly/oV7vV
Marker Tower
skfb.ly/oUKzC
Marker 30 deg
skfb.ly/oUNEO
Marker 60 deg
skfb.ly/oUNFx
Maker long distance target
skfb.ly/oURvQ
#creality #3dscanner #markers #target #raptor #otter
Music: bensound.com
License code: G6DFSGIST7RRJG5G
Genius! More, more, more!
Markers glued to magnetic tape also works :)
I made hundreds of them with magnetic paper. Just put them on the paper, then use a hole punch tool that has the same size as the marker. Fast to make. I use a bigger magnet to remove them from the scan object afterwards. Works like a charm.
That's a good idea, removing with another magnet. What kind of magnetic paper are you using? The one I have is like 2mm thick and too hard to cut.
When I scan steel pipe, I need to put some angle to the surface, flat markers will lose visual with an angle over 20-30 degree. But car body should work fine with flat marker.
@@Payo-TensileCreator I've found 0,7 mm "paper" in A4 format. I've tried 1,5 mm thick tape but as you said, it is quite hard to cut.
I can not post links here, without getting deleted. Google "Locheisen". You just punch them and get a perfect cut marker. It's super fast. Marker confetti 🎊
Any printable magnetic paper will be fine.
Wow! This magnetic markers are excellent. Another great video!
Even more great tips! Thank you.
shot in the dark but can you scan the otter with the raptor? I"m looking to make an ergonomic grip for it but dont want to spray it lol
I can do that, what kind of file output do you want? STL ?
@@Payo-TensileCreator that works perfect so i can print and mold around it :)
@@digital0785where will the grip be available?
Hey Payo! I have received my Raptor today but unfortunately connection to my PC is not working because it's only detected as USB2 device even if port is USB3 capable. I am using Cr-Scan 3.1.40 and FW 1.2.1. Many other people reporting same issue. Do you have faced similar problem with your Raptor? Any solution for this?
I have that sometime when it detects. What I did was just pull the USB cable out and put it back in again then it will show USB 3 speed. Sometime if I have many USB peripherals connect in many ports it also doesn't work in USB 3, I had to remove some of the connected cables.
Many thanks for your answer. With .30 version it does not detect the Raptor at all. Wirh .40 sw version it mostly only detecs as usb2. Sometimes with usb3 but only for few minutes then ir disconnects while scanning and detects only as usb2. Issue reproducable on 2x different PCs. Zero such issues when connecting usb3 high speed industrial cameras to my pc. Really very bad user experience on my side.
Do you think a laptop with i5-11400H and RTX 3060 will work with Raptor?
I think it should work, but I can't tell if you will get full 50-60 FPS or not. You can try if you already have it. I think anything above 30 FPS should give you a good scanning experience.
Mr. Payo, could you share or make available for purchase the models for your markers?
I've put the download links in the video description.
@Payo-TensileCreator thank you! I'm printing them now. I ordered a Raptor on a flash sale from Amazon yesterday. I see a lot your videos you imply the otter does a better job. Should I cancel my order and get an Otter?
@@AutismusPrime69 What kind of object would you mostly scan?
magnetic 5mm?
No, it's 6mm diameter and 3mm height.
🦾🦾🦾🦾
I got a raptor and really like it so far, I did my first scan the other night. The .ply mesh will not display in solidworks though. I am not sure why, do you have any experience importing these files into solidworks?
ua-cam.com/video/ct1ZPAmGm6U/v-deo.html
Usually, I only use point cloud in CAD. It should be able to import OBJ, most CAD software does. But I can't tell for sure because I mostly use Inventor.
@@Payo-TensileCreator I didn't mesh it before I exported it
They should make a new model with ultrasound scanning so it can scan any type of surface like transparent glass
When I scan Raptor on glass (Back of the phone) I'll get bumpy surface from high reflection. I need to use spray and wash it off later.
This is for you @makingformotorsport