Stuff like this is why I chose Lowrance. By far the easiest units on market and still very capable in today's competitive field. Excellent video and excellent teaching
Here's something I think would be an AWESOME addition to your fish finders that have maps/charts, because I don't think you can do this, and they only show you a lake or place, where your boat is - and if I am mistaken, I apologize. So here it is: Suppose you're at home, and you're planning a fishing trip, to a given lake. Wouldn't it be cool, if you could go out in your boat, and fire up your fish finder and had an option to "review water body", where you could enter a body of water into the fish finder, and it would bring that body of water's map up on the screen, so you could look over the depths, structure, lake shape etc., and better plan your fishing trip? Anyway - just an idea.
I have had one of these Hook 7, with the factory transducer for 12 months. I have a problem where the transduce stops registering a signal (knots and terrain etc once we exceed about 10 knots. The, once we stop the boat it takes ages, like 5 minutes to start reading anything at all. It's very frustrating, any ideas?
I have the hook reveal 5 s which has 6 frequencies, 200, 83, 50 and high, med, and low chirp. Can you tell me the cone angle for each frequency? Thank you.
Great video. I've been stressing about what fish finder to get. I currently have the Hummingbird Helix 5 DI and its ok but not what I'm looking for. Its down to Hook Reveal 7 triple shot and Hummingbird Helix 7 Mega DI. I'm totally going to get the Hook Reveal triple shot. Thank you for all the info.. I want to see the fish not the tree's.. lol
I have returned 2 of these Hook 7 Reveal. The units would not turn on, even though wiring was correct and 12.35V were being supplied thru the power cable to the unit. This was checked with a voltage meter. Talked to customer service & technical support, ran thru testing unit buttons attempting a reset of the unit. It still would not turn on. BTW: both customer service and tech reps are located in Manila Phillippines!! Both had very little knowledge and it felt I was educating THEM on voltage supply, requirements and wiring. What has happened to Lowrance. I have been loyal customer, 7 units over the past 30 years.....NO LONGER will be a customer!!!
@@lowrance I was finally able to contact Lowrance USA/Oklahoma office. Over the phone test walk thru and my voltage meter check, it was determined the 2nd unit is also defective. I returned it to the vendor purchased from.
one video says cant use sonar to prepare out of water, u say can do in garage , mine goes to stop screen when when i try in garage, and cant do anything.
Have you plugged the cmap or Navionics card into your computer, downloaded the latest maps, then put the card in you lowrance and adjusted the settings? I think that's the way to more detailed maps. There is a tutorial on UA-cam
I have a 18ft Ranger bass boat. Purchased Hook reveal 9TS. sonar cable needs to longer, for what it cost you think they would make it longer. Cant imagine what guys with 20- 22 boats do
Can someone help me understand what setting I need to access, to get my SOG to register? This was working fine, but now for some reason no matter what setting I get in to, it won't show the SOG. I thought it was my transducer setting, but no effect, no matter what I try. Thanks
It would be nice to see a monitor output port... we could then put a larger monitor in and us old dogs could see them better... control would still be done on the smaller unit. But that would be awesome!!
I just replaced my hook2 Splitshot with the Hook reveal Split shot and figured I could just leave the Hook 2 splitshot transducer on the boat and It should work perfectly with the reveal Splitshot. Am I thinking correctly. I also couldn't get a sonar reading first day on the water. It said Stopped. I went in and selected Splitshot transducer on the menu option and haven't had a chance to try it on the water yet. Is that the correct move.
I actually have a similar question. I just got my hook reveal split shot transducer included and found out the deep is not much accurate. Since I use my boat a lot for scuba diving and I need to know how deep I am so I was wondering if I can use a better transducer of course form lowrance to get more accurate results
I have a new Hook Reveal 7. Have added Navionics East card. I cannot get any map, Navionics or Genesis Live to come up. All connections are solid, see that it is hitting Sats, and when I bring up the Menu I do not see Chart on the left side. Ideas?
I’m getting the reveal 7 for my boat and I mostly only fish ocean and big rivers. How good will this give me a down image of ocean bottom at 350 ft. Can I pick out sturgeon on SI in 90 feet deep on a tidal water rover?
Good webinar but I still don’t understand the size of the bottom area I am actually seeing. Granted it varies by depth, but isn’t the beam angle fixed at a specific degrees? What is the angle on a hook reveal 5 splitshot?
I bought the Hook 2 TripleShot 7" a couple years ago. COVID has kept me off the water, so not much use. Technology moves on... I see how fabulous the Reveal feature works. Is it possible to upgrade my Hook2 so as to have the Reveal feature?
Follow the link to view a Battery Life Chart to have an idea of the usage. www.lowrance.com/help-and-support/?contentTitle=KayakSmall-Boat-battery-life-comparison-chart-for-Lowrance-units&contentId=023_007-169
Hi, I've just bought a hook 5 reveal splitshot, can you tell me what transducer I should choose in the menu for splitshot HDI transducer provided with the unit , Cheers..
One question. If a page is created with 3 parts, how do you adjust the size of both borders? When I selected the adjust split I can adjust the first border but not the second border. It shows the adjustment tab but can’t get it to toggle to the second border
use my 9 inc triple shot hook today but found it a litttle hard to follow im trying to orient top up but can find any orientation settings can you help
I read somewhere that the tripleshot sonar cone is wider than the splitshot cone. And that the splitshot is a bit better in clarity for deeper water in regards to separation targets due to it's slightly narrower cone. Is this true?
That is true. On hook2 2d aka traditional sonar was the weakest part on all transducers and in hook reveal series 2d transducer 83/200 was updated (now the same as with higher level lowrance units). Also 50/200 for deeper waters (bigger ceramic emmiter and more narrow cone than in 83/200) was introduced into hook series. Tripleshot remains unchanged. So for traditional sonar splitshot will work better than tripleshot. Quite good article here: teamcolibri.blogspot.com/2020/03/lowrance-hook-2-versus-lowrance-hook.html
So the maps are built in or do I need add card, when I go to gps I show a white screen with the curser in the center, that’s all. Am I doing something wrong?
Please follow the link where you can see all data included in our charts. Bear in mind the Hook Reveal unit is compatible only with C-Map Discover cartography.
Please follow the link where you'll find a good Battery Comparison Charts. www.lowrance.com/help-and-support/?contentTitle=KayakSmall-Boat-battery-life-comparison-chart-for-Lowrance-units&contentId=023_007-169
I know you can create maps using a micro sd card and genesis live on the 5x but can you also download and add genesis live maps that are on the internet cheers
The Hook Reveal X series is compatible with Genesis Live, but it is not compatible with mapping, therefore you cannot use the social maps with your 5X unit.
I clicked on to get some direct push button directions. Instead this is an overview of features not useful to me. That is how do I get to certain screen once I’m there how do I manipulate it and so on
In general, the TI units are faster in response to inputs. This is seen when quickly switching between sonar, downscan, chart, and split screens ua-cam.com/users/postUgkxeAxH15LxhjGlg5-CRYqjTGTEH0tbY4vk recommend The Hook units will show some lag on button pushes and screen switching. The big ticket item though is maps. If you install a mapping card such as Navionics or the free C-Map Genesis which has a lot of map detail, then moving around the map with the cursor or when running down the lake can lag significantly on the Hook units, but is seamless with the TI units.
It depends on the depth you're fishing. What transducer do you have? Keep in mind the Hook Reveal is an automatic unit and not many settings can be changed manually.
@Lowrance if i buy a triple shot hook reveal unit can i later add a hdi 50/200 transducer and just switch between them for fresh or salt water? A TS unit will be able to run both but a SS unit cannot run a TS transducer if i understand this correctly? Thanks
That is correct, you can use a 50/200kHz with a TS head unit, but you cannot use a TS transducer on a HDI head unit model. That is because the SS head unit does not have sidescan capabilities.
*This is significant **allabout.wiki/fd12?..**. When scrolling around the sonar screen or chart, setting waypoints, etc touch input is much smoother and quicker. On the Hook unit you have to use the arrow keys and buttons to do everything, which is slower, more confusing, and tedious. Imagine using your smart phone with no touch screen but with arrow keys and buttons instead and you get the idea. Touch input reduces frustration on the water.*
So if I am understanding this correctly, the hook reveal 5 ,7 and 9 series (shown here) will accept a standard mapping Louisiana card? “X” series you cannot use a 3rd party mapping program. Thanks
Does the depth finder stop working, or do you just lose the bottom? In the second case, you will need to check your transducer location and move it accordingly.
Yes it is waterproof, with IPX6/IPX7 value. You can follow the link below to view a battery life chart. www.lowrance.com/help-and-support/?guideId=013-148
I recently bought a Hook reveal 5 with a preloaded "base map". I'm now thinking about bying a map for my area (europe) can I "move" that one onto the unit? I want to be able to log and for that reason I need to have an other SD card I do not want to log to the Card where the map is.
We would not advise to use the chart card for other reason than navigating. You can save your sonar logs into the internal memory and then transfer them onto a blank micro SD card.
Just installed a brand new Reveal 5 Splitshot. Never got past the Lowrance logo screen before the screen flickered then went black. After the 4th attempt the logo screen would not even come up. Piece of junk! Ive been a Lowrance guy since the 80's with the paper graph. Disappointed to no end. What happened to quality control at Lowrance? Do you check each unit before its sent to distributors? Sending mine back to dealer for refund and will look at Hummingbird or Garmin. If I'm paying near $500 it better work first time!
I just got a hook reveal 7-ss...I hook it all up on my boat , sonar and down scan works good, only problem I have all i got is white screen on the gps screen so i have no maps at all , i thought this was plug and play
@@joeychristoffers9449 not yet had no time I'll try updating it first then will see , my brother has older one and hes maps work fine , so I don't know why no maps are mine , paid this much money and now I have to do all this
Rod- Our Hook Reveal unit has an IPX 7 rating if the card door is closed. This means that the unit is waterproof when submersed in water at a depth of one meter, for 30 minutes. So if your kayak flips over and the card door is closed, then the unit will be fine.
I just installed the hook reveal 7 triple shot and I am putting it on simulate mode and I don’t see anything on the screen it’s scrolling but no picture? Could my transducer be damaged? Or is that normal. If I put it on demo mode it does let me see the screen.. so it seems weird to me. Just wondering.
I checked with lowarance and the guy I talked to told me that the demo mode and the simulation mode was the same thing. So in my mind the guy that was representing lowrance obviously had no clew on what he was talking about. If there’s a problem I think it will be with the unit not the transducer. I will be taking it out on the water and checking to make sure that it works..
Please follow the link where you can download it downloads.lowrance.com/. Also in your unit, under Storage > My files, you will find a pdf version of the manual.
I just realized I didn't do my homework before I bought my hook 7xss. Shouldn't have gotten that one. The gps/ maps are nonexistent. GPS is a blank screen with an arrow. I bought a card didn't do shit.
Stuff like this is why I chose Lowrance. By far the easiest units on market and still very capable in today's competitive field. Excellent video and excellent teaching
Thanks, James! We appreciate you!
As a new Hook Reveal owner, this was very helpful and well presented ! ! !
Puno ste me naučili. Hvala.
G.T.: You taught me a lot. Thank you. 👍
Thank you. My first day fishing with my 7TS was being in a new world. You guys have done a great job with this device.
Thank you. We're happy you're satisfied with your unit.
So you really like it so far? Im going to get it too but the model doesn’t seem to come with a map (ROW only)
That re-store settings was the best note today.
Could you do some settings on the units for kayak fishing give advice on this would help lots of people
This is a unit for kayaks
Here's something I think would be an AWESOME addition to your fish finders that have maps/charts, because I don't think you can do this, and they only show you a lake or place, where your boat is - and if I am mistaken, I apologize. So here it is: Suppose you're at home, and you're planning a fishing trip, to a given lake. Wouldn't it be cool, if you could go out in your boat, and fire up your fish finder and had an option to "review water body", where you could enter a body of water into the fish finder, and it would bring that body of water's map up on the screen, so you could look over the depths, structure, lake shape etc., and better plan your fishing trip? Anyway - just an idea.
I have had one of these Hook 7, with the factory transducer for 12 months. I have a problem where the transduce stops registering a signal (knots and terrain etc once we exceed about 10 knots. The, once we stop the boat it takes ages, like 5 minutes to start reading anything at all. It's very frustrating, any ideas?
I have the hook reveal 5 s which has 6 frequencies, 200, 83, 50 and high, med, and low chirp. Can you tell me the cone angle for each frequency? Thank you.
I wish you would put a manual in the box just like you used to
Looking to put in my new Hobie Lynx
So if I buy the hook 7 reveal with gps only can I add the 4000 lakes map pack later? You quickly covered it but was unclear.
Great video. I've been stressing about what fish finder to get. I currently have the Hummingbird Helix 5 DI and its ok but not what I'm looking for. Its down to Hook Reveal 7 triple shot and Hummingbird Helix 7 Mega DI. I'm totally going to get the Hook Reveal triple shot. Thank you for all the info.. I want to see the fish not the tree's.. lol
I have returned 2 of these Hook 7 Reveal. The units would not turn on, even though wiring was correct and 12.35V were being supplied thru the power cable to the unit. This was checked with a voltage meter. Talked to customer service & technical support, ran thru testing unit buttons attempting a reset of the unit. It still would not turn on. BTW: both customer service and tech reps are located in Manila Phillippines!! Both had very little knowledge and it felt I was educating THEM on voltage supply, requirements and wiring. What has happened to Lowrance. I have been loyal customer, 7 units over the past 30 years.....NO LONGER will be a customer!!!
Please send us a message via Facebook with your contact details and unit's serial number. We'll be happy to help you from there.
@@lowrance I was finally able to contact Lowrance USA/Oklahoma office. Over the phone test walk thru and my voltage meter check, it was determined the 2nd unit is also defective. I returned it to the vendor purchased from.
Good thing I watched this I was about to but the trippleshot transducer cause I just bought a hook reviel 7
Wish they had a video on how to connect this all to the battery. battery cable comes with tiny wires so unsure how they should be connected
softwaredownloads.navico.com/Lowrance/FTP/Lowrance_Software%20-%20Copy/documents/Hook-Reveal-7_IG_EN_988-12654-001_w.pdf
Yes what Transducer do I select in setting for the Hook Reveal 7ss?
one video says cant use sonar to prepare out of water, u say can do in garage , mine goes to stop screen when when i try in garage, and cant do
anything.
How is your built in map so detailed i have the hook reveal 7 and the preloaded map is very basic?
Have you plugged the cmap or Navionics card into your computer, downloaded the latest maps, then put the card in you lowrance and adjusted the settings? I think that's the way to more detailed maps. There is a tutorial on UA-cam
I have a 18ft Ranger bass boat. Purchased Hook reveal 9TS. sonar cable needs to longer, for what it cost you think they would make it longer. Cant imagine what guys with 20- 22 boats do
Can someone help me understand what setting I need to access, to get my SOG to register? This was working fine, but now for some reason no matter what setting I get in to, it won't show the SOG. I thought it was my transducer setting, but no effect, no matter what I try. Thanks
It would be nice to see a monitor output port... we could then put a larger monitor in and us old dogs could see them better... control would still be done on the smaller unit. But that would be awesome!!
Some of our units do have that features. Thank you for the suggestion though.
Great detailed information!
Whats with the black bar that comes up everytime the depth changes...my garmin doesnt do that
I just replaced my hook2 Splitshot with the Hook reveal Split shot and figured I could just leave the Hook 2 splitshot transducer on the boat and It should work perfectly with the reveal Splitshot. Am I thinking correctly. I also couldn't get a sonar reading first day on the water. It said Stopped. I went in and selected Splitshot transducer on the menu option and haven't had a chance to try it on the water yet. Is that the correct move.
I actually have a similar question. I just got my hook reveal split shot transducer included and found out the deep is not much accurate. Since I use my boat a lot for scuba diving and I need to know how deep I am so I was wondering if I can use a better transducer of course form lowrance to get more accurate results
I have a new Hook Reveal 7. Have added Navionics East card. I cannot get any map, Navionics or Genesis Live to come up. All connections are solid, see that it is hitting Sats, and when I bring up the Menu I do not see Chart on the left side. Ideas?
Exact same issue here ...
can any lowrance products detect ropes in the water theres lots of dans and ropes in our water can you help please?
I like the Ti2
Can one record the results of the fishfinder on a memory chip ?
My hook reveal nine keeps going back to 5 feet for the bottom. What is causing that
I’m getting the reveal 7 for my boat and I mostly only fish ocean and big rivers. How good will this give me a down image of ocean bottom at 350 ft. Can I pick out sturgeon on SI in 90 feet deep on a tidal water rover?
Hi Jeremiah, you mentioned a promo, is that still available?
how do you set waypoint in track back?
Good webinar but I still don’t understand the size of the bottom area I am actually seeing. Granted it varies by depth, but isn’t the beam angle fixed at a specific degrees? What is the angle on a hook reveal 5 splitshot?
beam angle as follows:
83/200kHz:
83kHz 52º - 200kHz 22º
50/200kHz:
50kHz 35º - 200kHz 12º
I bought the Hook 2 TripleShot 7" a couple years ago. COVID has kept me off the water, so not much use. Technology moves on... I see how fabulous the Reveal feature works. Is it possible to upgrade my Hook2 so as to have the Reveal feature?
Hi Stephen, please send us a message via Facebook and we'll see what we can do for you.
@@lowrance It's not clear to me how to get a message to you via FB. Could you help me out? Thanks.
Hi Stephen, visit our FB page and send us a message from there
facebook.com/Lowrance
Can you use a lithium LiFePo4 battery with these units or is the voltage too high?
Follow the link to view a Battery Life Chart to have an idea of the usage. www.lowrance.com/help-and-support/?contentTitle=KayakSmall-Boat-battery-life-comparison-chart-for-Lowrance-units&contentId=023_007-169
Hi, I've just bought a hook 5 reveal splitshot, can you tell me what transducer I should choose in the menu for splitshot HDI transducer provided with the unit , Cheers..
One question. If a page is created with 3 parts, how do you adjust the size of both borders? When I selected the adjust split I can adjust the first border but not the second border. It shows the adjustment tab but can’t get it to toggle to the second border
You will need to select the part you want to change before hitting the 'Adjust Split'
use my 9 inc triple shot hook today but found it a litttle hard to follow im trying to orient top up but can find any orientation settings can you help
awesome tutorial. What's the difference between the 5 and 5X
The 5x is GPS only unit, no maps feature available.
I am looking for a chart card showing detail of Core sound, what do you have?
I read somewhere that the tripleshot sonar cone is wider than the splitshot cone. And that the splitshot is a bit better in clarity for deeper water in regards to separation targets due to it's slightly narrower cone. Is this true?
That is true. On hook2 2d aka traditional sonar was the weakest part on all transducers and in hook reveal series 2d transducer 83/200 was updated (now the same as with higher level lowrance units). Also 50/200 for deeper waters (bigger ceramic emmiter and more narrow cone than in 83/200) was introduced into hook series. Tripleshot remains unchanged. So for traditional sonar splitshot will work better than tripleshot. Quite good article here: teamcolibri.blogspot.com/2020/03/lowrance-hook-2-versus-lowrance-hook.html
Wir brauchen ein Video zur Einstellung in Deutsch
Hi, is the keypad backlit on this model? The Hook 2 was not and was a pain when fishing at night.
So the maps are built in or do I need add card, when I go to gps I show a white screen with the curser in the center, that’s all. Am I doing something wrong?
Martin, it appears your unit is a Hook Reveal X series, which mean only GPS no mapping. The unit does not have cartography feature.
100m. I hot lot of fish on 80m.but no arch.just the bottom of sea.is some body can expplain what hapend?
I have hook2 7x triple shot and on mode 2D sonar I dont see the arched ....what up the trouble on my unit....
Thanks
I am in Australia and have just bought one of these units and it doesn't even have my local lake in it. So do I have to make my own map?
You can create your own map via with the use of C-Map Genesis www.genesismaps.com/
What do you do when you turn it on and go to down scan and it shows stoped what wrong or what did I do wrong
is there a list of lakes included?
Please follow the link where you can see all data included in our charts. Bear in mind the Hook Reveal unit is compatible only with C-Map Discover cartography.
hi mate with the Lowrance Hook²-4x GPS Fish Finder how can i change the saltwater and freshwater settings
How difficult would it be to remove the faceplate on a hook 7 to paint to match my boat. Thanks
What is the recommended battery for the hook reveal 7 splitshot
Please follow the link where you'll find a good Battery Comparison Charts.
www.lowrance.com/help-and-support/?contentTitle=KayakSmall-Boat-battery-life-comparison-chart-for-Lowrance-units&contentId=023_007-169
I know you can create maps using a micro sd card and genesis live on the 5x but can you also download and add genesis live maps that are on the internet cheers
The Hook Reveal X series is compatible with Genesis Live, but it is not compatible with mapping, therefore you cannot use the social maps with your 5X unit.
WHAT IS THE BUTTONS USED TO TURN ON THE LOWERENCE IN WHAT ORDER?
Please follow the link to find an explanation of the buttons
www.lowrance.com/help-and-support/?guideId=002-871
Does anyone have the link to the video addressing the transducer installation??
I guess I'm just stupid I cant figure out the gps or maps I got a blank card but it's only showing a blank screen with the arrow. I dont get it.
Can you create maps on the x models with genesis live
I got a hook 5 triple shot lowarance and a hook 7 triple shot Wanted to find out if there is a connection so i can use one transducer.
The Hook2/Hook Reveal series does not have networking capabilities.
In order to share sonar, you would need an ethernet connection.
How are you running your fish finder when you don't have the transducer in water
Simulation mode
I clicked on to get some direct push button directions. Instead this is an overview of features not useful to me. That is how do I get to certain screen once I’m there how do I manipulate it and so on
Can’t see what you’re pointing at for most of the video. Zoom in next time. Thanks
is there an option to swich to metric units?
If the unit is a US bought unit then you cannot switch metric units.
In general, the TI units are faster in response to inputs. This is seen when quickly switching between sonar, downscan, chart, and split screens ua-cam.com/users/postUgkxeAxH15LxhjGlg5-CRYqjTGTEH0tbY4vk recommend The Hook units will show some lag on button pushes and screen switching. The big ticket item though is maps. If you install a mapping card such as Navionics or the free C-Map Genesis which has a lot of map detail, then moving around the map with the cursor or when running down the lake can lag significantly on the Hook units, but is seamless with the TI units.
Hellofrom greece,As a new Hook Reveal 9 owner, i want to ask you , which is the best setup , for squid fishing?
It depends on the depth you're fishing. What transducer do you have? Keep in mind the Hook Reveal is an automatic unit and not many settings can be changed manually.
@@lowrance Τhe depth that i am fishing,is from 15m until 35m, and the tranducer is 50/200 HDI XDCR .
How do you open the sd card
@Lowrance if i buy a triple shot hook reveal unit can i later add a hdi 50/200 transducer and just switch between them for fresh or salt water? A TS unit will be able to run both but a SS unit cannot run a TS transducer if i understand this correctly? Thanks
That is correct, you can use a 50/200kHz with a TS head unit, but you cannot use a TS transducer on a HDI head unit model. That is because the SS head unit does not have sidescan capabilities.
*This is significant **allabout.wiki/fd12?..**. When scrolling around the sonar screen or chart, setting waypoints, etc touch input is much smoother and quicker. On the Hook unit you have to use the arrow keys and buttons to do everything, which is slower, more confusing, and tedious. Imagine using your smart phone with no touch screen but with arrow keys and buttons instead and you get the idea. Touch input reduces frustration on the water.*
The Hook Reveal is easy to use. The buttons are no big deal.
First world problems
So if I am understanding this correctly, the hook reveal 5 ,7 and 9 series (shown here) will accept a standard mapping Louisiana card?
“X” series you cannot use a 3rd party mapping program. Thanks
All the Hook Reveal will accept a C-Map N+
The X series will not accept any chart card.
@@lowrance thanks for the info, I’ve decided to go w the elite 7 ti2... now to figure out where to mount it on the kayak and how to run this beast!
question- i have a lowrance revel 5- it is setup on a pontoon. when I go over 12 knots the depth finder stops working. any thoughts?
Does the depth finder stop working, or do you just lose the bottom? In the second case, you will need to check your transducer location and move it accordingly.
Is it waterproof? I have a 10ah battery. How long does it last with a Reveal 5?
Yes it is waterproof, with IPX6/IPX7 value. You can follow the link below to view a battery life chart.
www.lowrance.com/help-and-support/?guideId=013-148
@@lowrance Thank you.
Ok I just need a card
I recently bought a Hook reveal 5 with a preloaded "base map". I'm now thinking about bying a map for my area (europe) can I "move" that one onto the unit? I want to be able to log and for that reason I need to have an other SD card I do not want to log to the Card where the map is.
You cannot modify the map that is preinstalled onto your plotter. You will need to use another micro SD card to save your sonar logs onto.
@@lowrance Thanks for the update, what happens if I buy an other C-map chart with my area, can I log to that card and make social maps from it?
We would not advise to use the chart card for other reason than navigating. You can save your sonar logs into the internal memory and then transfer them onto a blank micro SD card.
@@lowrance If i log on the device can I then load them onto the Map card ie with the separate map?
Can you install navionics regions on this.?
Mine is only black screen the menue screen come on?
Please send us a message via FB with your unit serial number and a pictures of the issue. We'll be happy to help you from there.
Just installed a brand new Reveal 5 Splitshot. Never got past the Lowrance logo screen before the screen flickered then went black. After the 4th attempt the logo screen would not even come up. Piece of junk! Ive been a Lowrance guy since the 80's with the paper graph. Disappointed to no end. What happened to quality control at Lowrance? Do you check each unit before its sent to distributors? Sending mine back to dealer for refund and will look at Hummingbird or Garmin. If I'm paying near $500 it better work first time!
How do you set the mapping chip
You will need to purchase a C-Map Discover chart card if you want to have maps.
If you make a map of a local pond, will the unit load it the next time you return to that location?
Can I use the tripleshot on hook reveal 5 ? Or only accept 50/200 ?
If you have a Hook Reveal 5" SS then you cannot use the tripleshot transducer, as your unit does not have sidescan capabilities.
I have a new hook reveal7 ss and I have ZERO down scan/imaging.
Were you able to fix your unit and get downscan feature on the unit? Please send us a message on FB if you're still having issues.
@@lowrance I posted it on Facebook
Is there a link to the video mentioned at 40:49 about the transducer height? Thanks.
Never mind. Found it.
ua-cam.com/video/m7k0ECCQjeY/v-deo.html
My maps I couldn't figure out it was only the arrow on a blank screen
X model does not have maps only Genis live mapping.
I just got a hook reveal 7-ss...I hook it all up on my boat , sonar and down scan works good, only problem I have all i got is white screen on the gps screen so i have no maps at all , i thought this was plug and play
Me to man. I tried downloading maps from c map genesis still no go.
did you eve figure this out
\
@@joeychristoffers9449 not yet had no time I'll try updating it first then will see , my brother has older one and hes maps work fine , so I don't know why no maps are mine , paid this much money and now I have to do all this
what is the maximum depth range hook revel transducer 50 200 in salt water ?
The 50/200kHz can penetrate salt water up to 300m.
I have a hook reveal 7x TS will it work with a hook2 transducer
hello, yes, it will work with the Hook Reveal head.
Is it waterproof???
If you have it on a kayak and get flipped and it is dunked for one minute or less; will it kill it???
Rod- Our Hook Reveal unit has an IPX 7 rating if the card door is closed. This means that the unit is waterproof when submersed in water at a depth of one meter, for 30 minutes. So if your kayak flips over and the card door is closed, then the unit will be fine.
@@lowrance Thank you!!
I just installed the hook reveal 7 triple shot and I am putting it on simulate mode and I don’t see anything on the screen it’s scrolling but no picture? Could my transducer be damaged? Or is that normal. If I put it on demo mode it does let me see the screen.. so it seems weird to me. Just wondering.
@@dandiego6199 I have the same problem. Looks knackered to me so will check with Lowrance tomorrow.
I checked with lowarance and the guy I talked to told me that the demo mode and the simulation mode was the same thing. So in my mind the guy that was representing lowrance obviously had no clew on what he was talking about. If there’s a problem I think it will be with the unit not the transducer. I will be taking it out on the water and checking to make sure that it works..
11:35 I have the Hook Reveal 7 and I don't have maps...?
You probably have the Hook Reveal 7x. The X series does not provide mapping, it's GPS only.
@@lowrance That's correct.
Can you use map cards in a Hook 2 x 4 bullet.
The Hook2 X series is sonar GPS only, no chance to insert a chart card.
Can I use my triple shot transducer with this unit head
You can use the TS transducer with the head unit. However, if the head unit is a SplitShot, then you will not get the sidescan feature on it.
Does it have Asian Map
Get me from off to a scan on a small lake
Why doesn't my new hook 5 have a quick guide in english
Please follow the link where you can download it downloads.lowrance.com/. Also in your unit, under Storage > My files, you will find a pdf version of the manual.
How large a memory card will the unit accept?
I’m trying see do the memory card come with it?
What transducer do I select for the TS 7
Under Settings > Sonar > Transducer select TripleShot
@@lowrance I saw many listed that had like H1 or HI with other characters , I look again thanks
Man I’m sick I just bought the hook2 7 TS and I would have much rather got the reveal I’ve opened th box but that’s it😢
Is it water proof
Hey man,
God I wish I lived in the states $500 for a 7”
I just realized I didn't do my homework before I bought my hook 7xss. Shouldn't have gotten that one. The gps/ maps are nonexistent. GPS is a blank screen with an arrow. I bought a card didn't do shit.
I’m having the same problem with a 5x. We’re you ever able to do Genesis live with an sd card?
As usual we in the UK are fleeced, the built in US mapping is neither use or ornament to us.
In Europe we need to deal with each hydrographic offices per each country. It is not as simple as it looks.