Shop talk DF 33 Build Final, Wait till you see how this turned out !
Вставка
- Опубліковано 15 вер 2024
- Delta Force 33 Build Finale, Wait till you see how this turned out !
Offshore Electrics
Delta Force 33 Hull
www.offshoreel...
Offshore Electrics TFL Stinger
www.offshoreel...
Offshore Electrics
OSE Dual pickup rudder assembly
www.offshoreel...
Offshore Electrics
Carbon fiber heavy duty motor mount for 40mm motors.
www.offshoreel...
Offshore Electrics
Wide Carbon Fiber battery tray for monos 200mm long
www.offshoreel...
Offshore Electrics
Castle Creations HYDRA X 8S, 33.6V ESC, 8A PEAK BEC
www.offshoreel...
Amazon
Castle Creations 4-Pole Sensored Brushless 1515-2200Kv V2
www.amazon.com...
Castle Creations
WATER JACKET, ALUMINUM, 15 SERIES MOTORS
www.castlecrea...
Offshore Electrics
Metal Turn Fins (1 Pair) : Medium : 68mm Long
www.offshoreel...
Offshore Electrics
1 Pairs of Trim Tabs: Medium Sized
www.offshoreel...
Offshore Electrics
OSE Heavy Duty upgraded flex cable for TFL Smash Shark
www.offshoreel...
Offshore Electrics
OSE Aluminum Large Water Outlet
www.offshoreel...
Offshore Electrics
OSE 5mm to 4.75mm (.187") Coupler
www.offshoreel...
#rcboat #Proboat #Traxxas #deltaforce #outrigger #shrimpboat
#oxideanmarine #brushless #Flycolor #zippkits #jae26
Looks like a real offshore boat with the new livery
I like the Gulf Oil sticker. The inlay came out clean. Nice work
So keen to see it run I did one and I might have told you already but I run an out runner on a single 5amp lipo 150 flycolor and m447 octura I get 100 kph or 62 mph out of it but it chine walks so bad I had to put a flat spot in the top of the vee and a flood chamber in it. It’s probably just the torque of the outrunner that caused it but I wait to see your result.
This one has a ride pad on the bottom . Would love to know what outrunner motor you are running in yours? hope to get to the pond today to run mine. also if you have trim tabs on yours add a bit down on the right side to see if that helps your walk.
@@AdamEverythingRC I could email you the motor ad if I had your email but if you google MT-4250 -6s 1750 kv outrunner you should find it.
$69 usd great motor
I replied about the motor but can see it.
It’s a JP Hobby 4250 6S 1750 kv 12 pole outrunner $69 usd
@@jamesatkinson7517 Nice, you must be running that on 6S to get the 62 MPH with 1750 KV Good Job . love to see how you made a flood chamber
@@AdamEverythingRC I did it all the way to the tip and wider than the side of the deck in the motor area is all the way across towards the middle to the side of the 6s 5000 mah battery so there is a deck to it in that area.
Also vent holes in the front deck area of it and side deck to let the air out.