How to Replace Front Brakes 2003-2007 Infiniti G35

Buy Now!
New Brake Pad & Rotor Kit from 1AAuto.com 1aau.to/ia/1ABF...
This video shows you how to install new, quality TRQ brake pads and rotors on your 2003-2007 Infiniti G35. Brake pads wear out over time, much like tires, and need replacing, on average, every 50,000 miles, with variations depending on driving habits and environment. Brake rotors may also need to be replaced if they are warped or grooved. Often, it’s safer and more cost effective to replace pads and rotors at the same time. Squealing or grinding noises, or wheel vibration are all symptoms of worn brakes.
This process should be similar on the following vehicles:
2003 INFINITI G35
2004 INFINITI G35
2005 INFINITI G35
2006 INFINITI G35
2007 INFINITI G35
Tools you will need:
• 14mm Wrench 1aau.to/oYo/1AX...
• 14mm Socket 1aau.to/obBq/1A...
• 21mm Socket 1aau.to/oakN/1A...
• 22mm Socket 1aau.to/opm/1AX...
• Brake Caliper Compressor Tool. Single Piston. Lever Style. 1aau.to/oaZ/1AX...
• Brake Caliper Hanger 1aau.to/ojv/1AX...
• Large Locking Pliers
• 1/2 Inch Impact Gun 1aau.to/ouj/1AX...
• 3/8 Inch Impact Gun
• Ratchet 1aau.to/obF9/1A...
• Torque Wrench 1aau.to/oaJ6/1A...
• Brake Grease
• Brake Parts Cleaner
• Gloves 1aau.to/oahD/1A...
• Safety Glasses 1aau.to/oaax/1A...
• Floor Jack 1aau.to/o9w/1AX...
• Jack Stands 1aau.to/oWK/1AX...
• Wheel Chocks
• Wire Brush 1aau.to/otK/1AX...
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money

[@jeffwalker2794]

Duh in the end it was the old rotors on when he was torquing down the lug nuts 😂

[@Gretsch0997]

I was hoping to find out why the inserts have wings

[@stopher1971]

When I put my new slider pins in after I greased them up I had a lot of resistance behind that pen like an air pocket. I thought that was the way it should be so that’s the way I installed it whenever I push the pin in. It would push right back out by itselflooks like it was designed that way so I told myself yeah that looks good and installed it, I wonder if that would be causing a rattle that I have upfront maybe that’s pushing the caliper too far away from the rotor and causing it to rattle

[@scottmartin7213]

Why do the inserts have wings and do they go into the bottom pad ?

[@reflexaction4367]

Great video! Just gained a new sub. Please make more videos like this.