SUper Cool! I have a t2i and was thinking of ways i could use it still. Saw the Canon EOS webcam utility combine it with a powersupply, and boom, pretty good webcam for streaming!
Thank you! Will this keep the camera video function going, without auto stopping, as the battery does? It seems with battery power, auto shut off occurs within 15 minutes or so when video is used. I do have the settings set to not turn off, however it does anyway. I make cooking videos and is frustrating to find out too late, the camera shut off automatically!
Unfortunately, no. This will not prevent the camera from automatically stopping recording after 30 minutes. This is in part due to European regulations regarding video equipment - if the camera did not shut off after 30 minutes, then the EU considers the camera to be fall under a different tax rule, which would require the camera to be taxed at an exorbitant rate. In effect, Canon crippled the camera on purpose to keep the camera affordable and in the consumer tax bracket and not seen as a professional video camera. You can get around this by using Sparkocam and recording using your computer. Sparkocam will automatically restart the camera every 30 minutes. Alternatively, you can use a canon M50 MarkII or something like a Nikon D750. I've been able to have both cameras record with OBS for 3 hours with a capture card (Elgato) without any need to restart the camera. Else, all DSLR's have the same limitation... and I point my finger at the taxing authorities of the EU who force companies to make decisions. It's cheaper for Canon or Nikon to make one BIOS version for the camera rather than have a separate configurations for different countries. But --- it does help with long shoots regardless. Good luck!
@@jeffwspencer thanks much for your reply! I have been struggling for years to figure the issue out! At least I know the time limitation. It still does some really nice videos that I edit with premiere elements. After that huge learning curve, the videos are coming out half way decent! Thank you, again!!!!
No, it is not necessary at all. It’s only convenient for me - as such - to take out the external battery and use the dual-battery setup when not on external power. It’s totally up to you. I also like the grip for the extra size. Again - personal preference. 😁👍
Same for me. I've tried 2 of these and neither worked in my T2i. They are 7.4V 2A power supplies and the T2i says 8.1V on bottom of camera. I don't know if it's underpowered or what. Battery works fine.
I know this video is 3 years old but how has the Adaptor held up in the 3 years you've used it. I'm looking into getting one and these cost considerably less than an official canon one. anyone have experience?
The power adapter is still working like a champ with my ancient (10 years old) T2i DSLR. I've not had any problems with it whatsoever. I can't speak to the canon version - as I've only had this one, and also using a 3rd party power grip. I hope your experience is as thrifty and utilitarian as mine! =)
@@dvptube Thanks! I appreciate it. I just like the grip because it's easier to to manage the battery when the camera is on a tripod, and I like the "bigger" feel it gives when hand holding. My T2i is older than dirt - but it's dependable! =) Thanks for watching!
Hello all, I know it is an old link but in case some one can help, please respond. I did not see this link before I made my device. But here is the problem I am running into. Advise: For my EOS 40D, The original battery is rated at 7.4 volt. The body of the camera at bottom says 8.1 volt. The original dummy battery and ac converter that is sold by Canon for this camera is 8.1v 2Amp. So I am assuming a 2Amp 8.1 volt power supply should be adequate to run this camera. OK, so I made my dummy battery (dr-400 from the original bp-511). Inserted it in the camera. Checked it out with multimeter that the connections are correct. Then I have powered it with many different sources with the same result. I used a step down converter which is rated at 3amp to reduce voltage down to up to 8.4v (I am afraid i might burn the camera if I go over the 8.4v) and used power from DC 12volt 7amp lead battery or 19v laptop battery or AC converter, they all give me same result. The camera sees the battery but displaying an empty battery flashing sign in display but camera will not power up. I even used an 18650 power pack (8.4v 8amp) directly (no step down) to the dummy battery. Same result. AC wall converter with 8.4v 3.5amp amp DC output, same result. What am I doing wrong? thanks for the help.
SUper Cool! I have a t2i and was thinking of ways i could use it still. Saw the Canon EOS webcam utility combine it with a powersupply, and boom, pretty good webcam for streaming!
You sir are a savior! Placing it in the battery grip did the trick. Thank you!
Exactly the guidance I needed.
Hi Jeff,
Thanks for the video. I was wondering: can you put a normal battery in as well in case of a sudden power loss? Thanks.
Great Question. It prompted me to answer it via a new video. =) ua-cam.com/video/OmEocqN0px8/v-deo.html
Thank you! Will this keep the camera video function going, without auto stopping, as the battery does? It seems with battery power, auto shut off occurs within 15 minutes or so when video is used. I do have the settings set to not turn off, however it does anyway. I make cooking videos and is frustrating to find out too late, the camera shut off automatically!
Unfortunately, no. This will not prevent the camera from automatically stopping recording after 30 minutes. This is in part due to European regulations regarding video equipment - if the camera did not shut off after 30 minutes, then the EU considers the camera to be fall under a different tax rule, which would require the camera to be taxed at an exorbitant rate. In effect, Canon crippled the camera on purpose to keep the camera affordable and in the consumer tax bracket and not seen as a professional video camera. You can get around this by using Sparkocam and recording using your computer. Sparkocam will automatically restart the camera every 30 minutes. Alternatively, you can use a canon M50 MarkII or something like a Nikon D750. I've been able to have both cameras record with OBS for 3 hours with a capture card (Elgato) without any need to restart the camera. Else, all DSLR's have the same limitation... and I point my finger at the taxing authorities of the EU who force companies to make decisions. It's cheaper for Canon or Nikon to make one BIOS version for the camera rather than have a separate configurations for different countries. But --- it does help with long shoots regardless. Good luck!
@@jeffwspencer thanks much for your reply! I have been struggling for years to figure the issue out! At least I know the time limitation. It still does some really nice videos that I edit with premiere elements. After that huge learning curve, the videos are coming out half way decent! Thank you, again!!!!
Is it necessary to have a battery grip in order for the external battery to work?
No, it is not necessary at all. It’s only convenient for me - as such - to take out the external battery and use the dual-battery setup when not on external power. It’s totally up to you. I also like the grip for the extra size. Again - personal preference. 😁👍
@@jeffwspencer thank you!
Thanks for posting this video! I was worried I'd buy this battery and it wouldn't work in my T2i.
Gabriel Rains you’re welcome! Still going strong in my T2i that I’m using as a webcam for my quarantine meetings!! Thanks for you comment!
Same for me. I've tried 2 of these and neither worked in my T2i. They are 7.4V 2A power supplies and the T2i says 8.1V on bottom of camera. I don't know if it's underpowered or what. Battery works fine.
I know this video is 3 years old but how has the Adaptor held up in the 3 years you've used it. I'm looking into getting one and these cost considerably less than an official canon one. anyone have experience?
The power adapter is still working like a champ with my ancient (10 years old) T2i DSLR. I've not had any problems with it whatsoever. I can't speak to the canon version - as I've only had this one, and also using a 3rd party power grip. I hope your experience is as thrifty and utilitarian as mine! =)
excellent video, can it be used without a grip?
Howdy DIego. Yup - sure it can.. Would you like another video to demonstrate?
@@jeffwspencer
thank you very much for answering! I just needed to know, so I would not buy the grip. nice channel!
@@dvptube Thanks! I appreciate it. I just like the grip because it's easier to to manage the battery when the camera is on a tripod, and I like the "bigger" feel it gives when hand holding. My T2i is older than dirt - but it's dependable! =) Thanks for watching!
@@jeffwspencer thanks
What happens if the camera won’t take a charge?
Hello all,
I know it is an old link but in case some one can help, please respond.
I did not see this link before I made my device. But here is the problem I am running into. Advise:
For my EOS 40D, The original battery is rated at 7.4 volt. The body of the camera at bottom says 8.1 volt. The original dummy battery and ac converter that is sold by Canon for this camera is 8.1v 2Amp. So I am assuming a 2Amp 8.1 volt power supply should be adequate to run this camera. OK, so I made my dummy battery (dr-400 from the original bp-511). Inserted it in the camera. Checked it out with multimeter that the connections are correct. Then I have powered it with many different sources with the same result.
I used a step down converter which is rated at 3amp to reduce voltage down to up to 8.4v (I am afraid i might burn the camera if I go over the 8.4v) and used power from DC 12volt 7amp lead battery or 19v laptop battery or AC converter, they all give me same result. The camera sees the battery but displaying an empty battery flashing sign in display but camera will not power up. I even used an 18650 power pack (8.4v 8amp) directly (no step down) to the dummy battery. Same result. AC wall converter with 8.4v 3.5amp amp DC output, same result.
What am I doing wrong? thanks for the help.
This thread may help you: stargazerslounge.com/topic/143006-1100d-external-power-help/