@@JulioCams thanks , the se pegs are pretty easy , take the bolt off that’s holding the rack now , hit up a hardware store and find one with the same thread that’s about an inch longer and get 4 fender washers that fit the bolt , make sure the washers are kind of wide , use the 3/8 adapter that comes with the pegs put a washer on inside of pegs and back side of peg that contacts the rack and your good to go , and the stem can come in tall or short in different colors here’s the link www.scootertuning.ca/en/styling-parts-handlebar-stems/13011-handlebar-fastener-str8.html if you get the tall one and run tall bars but intend on keeping your oem switch’s and controls you’ll have to extend wires and reroute brake cables/hose , good luck man !
That exhaust is fire for acceleration !
Fire
Legend 🔥
man thats clean
FRESHHHHHHHH
Clean build 🔥 Able to tell me how you installed the SE pegs? And can you give me the link to the stem you used? Appreciate it & Great vid.
@@JulioCams thanks , the se pegs are pretty easy , take the bolt off that’s holding the rack now , hit up a hardware store and find one with the same thread that’s about an inch longer and get 4 fender washers that fit the bolt , make sure the washers are kind of wide , use the 3/8 adapter that comes with the pegs put a washer on inside of pegs and back side of peg that contacts the rack and your good to go , and the stem can come in tall or short in different colors here’s the link www.scootertuning.ca/en/styling-parts-handlebar-stems/13011-handlebar-fastener-str8.html if you get the tall one and run tall bars but intend on keeping your oem switch’s and controls you’ll have to extend wires and reroute brake cables/hose , good luck man !