Oh FFS. That reminds me. I gotta get my 2006 TM MP5 A4 to you for a service. It's seen 10's of thousands of bb's through it. Love the MP5 range of guns. Great video as always. 👍
The electrical tape was put in place perfectly to seep glue into the cylinder head for maximum air seal, it’s genius! Good stuff once again!! Appreciate all the information you provide
Ive found the same trigger creep issue in Specna Arms/Lancer Tactical (OEM appears to be the same, just different color plastics on the inside). 8/10 times I was able to correct the issue by modifying the trigger switch trolleys where they interact with the cutoff lever as they tend to have a lot of extra material hanging off the edges from poor molding.
@@hitmanslayer3003 had great luck with mine. 12:1 short stroked 4 teeth running 44rps at 380fps. Jefftron Leviathan MOSFET, upgraded compression parts, madbull 6.03 barrel.
@@marinusdedreu3833 was never a fan of Jefftron so I never tried it. I tried with multiple gate mosfets and just plain contacts and microswitch. None ever worked right.
what's the difference in performance between the 20k and 45k motors? why would I want to choose a lower rpm? do they have more torque as opposed to the 45ks? new to motors
Just looking at the warhead motors direct from them, for the sake of £26 black cnc or base motor? Price difference vs performance I'm leaning towards base. What do you reckon?
Man I wish you worked on Scorpion Evos, I know it's not you're preference but I would have loved to have you work on mine and upgrade the shit out of it. That aside I'm in love with the mp5 and fairly new to Airsoft. Is there a particular one from a particular brand you'd recommend? Most of my local shops are pushing the TM one but hearing what you've said about TMs in the last just not sure what to do!
I'm a little confused (and no it's not the booze), I thought brushless motors required an ECS controller? Or is this some other type of brushless motor I've been unaware of?
These base model Warhead motors, the spread in price between them and the black just isn't wide enough to justify not just getting the black. Unfortunate.
Wow, after watching this video I'm glad I got a CYMA CM.014H Platinum. Disassembly is stupid fucking simple. I think I'm going to drop a Warhead base 27k in.
@@NegativeAirsoftTech makes sense. Sadly I’m in the states so mailing all way to the UK would cost a pretty penny. Was wondering if you were selling any of them separate. At some point I’ll have to get something built by you. Better than most of these paid shill tubers. You give straight talk without marketing wank.
Oh FFS. That reminds me. I gotta get my 2006 TM MP5 A4 to you for a service. It's seen 10's of thousands of bb's through it. Love the MP5 range of guns. Great video as always. 👍
Luke always brings helpful insight and knowledge. Hope all is well with you and hoping your business continues to thrive.
I just ordered a warhead base 35k for my LCT, and hearing your opinion on them assures me that it was money well spent
The electrical tape was put in place perfectly to seep glue into the cylinder head for maximum air seal, it’s genius!
Good stuff once again!! Appreciate all the information you provide
Ive found the same trigger creep issue in Specna Arms/Lancer Tactical (OEM appears to be the same, just different color plastics on the inside). 8/10 times I was able to correct the issue by modifying the trigger switch trolleys where they interact with the cutoff lever as they tend to have a lot of extra material hanging off the edges from poor molding.
It's sad that those JG adjustable spring guides haven't caught on, they're great for tuning between sites or compensating for Joule creep.
g&g has similar ones
Bum sausage
sum mausage
I am going to call this man a legend, every time i see his Comment from now on ;)
@@MrGashforCash Bum sausage
@@cmarriott3835 cum porridge
Love your music choice mate I love old school nostalgic shit
I got the patches. They look great. Also I think it's adorable that you let your kid write the address on the envelope. 🤣🤣😜
I knew I had to write it all handicapped or you'd feel insecure about not being able to read, at least you got somebody to read it to you.
🤣🤣🤣🤣🤣🤣🤣 I'm dead.
I have to say I only had issues with the option 1. Brushless motor. I would definitely avoid if possible.
It was already in there
@@NegativeAirsoftTech yeah I know just wanted to worn people not to buy them as an “upgrade”. Thanks for the great content as always.
@@hitmanslayer3003 had great luck with mine. 12:1 short stroked 4 teeth running 44rps at 380fps. Jefftron Leviathan MOSFET, upgraded compression parts, madbull 6.03 barrel.
@@marinusdedreu3833 was never a fan of Jefftron so I never tried it. I tried with multiple gate mosfets and just plain contacts and microswitch. None ever worked right.
Great video mate , and some lovely work 👍🏽
Glad you gotten to work on some Mp5s again my friend
Explain more… Motor has active breaking without mosfet?? If so, tbat is huge for me
Top vid mate, keep up the great work 👍
Seagulls come inland after heavy rain as worms come to the surface
what's the difference in performance between the 20k and 45k motors? why would I want to choose a lower rpm? do they have more torque as opposed to the 45ks? new to motors
Same as choosing high torque vs high speed.
@@NegativeAirsoftTech sweet, that's what I assumed. so a 20k would be akin to a high torque then?
Hey Luke what piston head should I get for a R85/G&G L85 gearbox? gonna replace a sheared piston with a 19 tooth plastic + metal one
Decent aluminium
@@NegativeAirsoftTech cheers, single o ring?
Single
Just looking at the warhead motors direct from them, for the sake of £26 black cnc or base motor? Price difference vs performance I'm leaning towards base. What do you reckon?
So just picked up a Cyma sr25. What motor would you suggest for a DMR build?
love the vibe of this video !
Any point in going with JGs when compared to the new Cyma 041s?
Interesting question, also interested in finding out.
Man I wish you worked on Scorpion Evos, I know it's not you're preference but I would have loved to have you work on mine and upgrade the shit out of it.
That aside I'm in love with the mp5 and fairly new to Airsoft. Is there a particular one from a particular brand you'd recommend? Most of my local shops are pushing the TM one but hearing what you've said about TMs in the last just not sure what to do!
Thank Thor for one piece MP5 bodies.
I have an ASG Infinity U-35000 motor in my KWA Ronin T6.
Would this motor be an upgrade for ROF and snappiness?
We need a part where you show us the sound of them seagulls
I'm a little confused (and no it's not the booze), I thought brushless motors required an ECS controller? Or is this some other type of brushless motor I've been unaware of?
It’s built in to the motor, it’s pretty much got a whole microcontroller in there
is it possible to decock a warfet? Also you got me into teching, and im getting my first customer in a week
I learned alot from this channel it saved me buying 3 new guns were i spent a few 100 on parts for my 2 guns and fixing my buddys 2 guns :)
What was that song at the end? Bloody loved it!
Tell me - tonydrummer
Love it. I want a Neg motor
hahaha i told you! Your motors man! ill get one soon if you put a happy face.
I wish I could have you work on my rif.
What are your thoughts on the VSS by Cyma? Or any VSS for that matter.
Like Lego made an AK.... absolutely awful looking
These base model Warhead motors, the spread in price between them and the black just isn't wide enough to justify not just getting the black. Unfortunate.
Whats the size of the allen key that you used to tighten the grub screw on the pinion head?
1.27mm says right on the side of the Allen key
What’s the weblink to buy a motor have a JG MP5k that I hope will benifit
Hey Dude, sent you an email on Monday about a T6 not sure if you can help me? Keep up the great vids - Peace A
Wow, after watching this video I'm glad I got a CYMA CM.014H Platinum. Disassembly is stupid fucking simple. I think I'm going to drop a Warhead base 27k in.
So what is a better sd6 mp5 jg lr cyma for base?
Where can I buy one of the negative warheads
Where are the short type Warhead motors? AK users gonna be upset 👀
I feel like there may have been a couple of subliminal messages hidden in this vid.🤪
Can we request a video shimming mp5? That pinion to bevel …
You can shim that part of it
Omg you loctite your pinion, I’m probably being dumb by having it completely untightened
Where can I buy one of your base motors?
Gotsta have me build your gun...
@@NegativeAirsoftTech makes sense. Sadly I’m in the states so mailing all way to the UK would cost a pretty penny. Was wondering if you were selling any of them separate. At some point I’ll have to get something built by you. Better than most of these paid shill tubers. You give straight talk without marketing wank.
😓 p͓̽r͓̽o͓̽m͓̽o͓̽s͓̽m͓̽
I want a patch really bad now so i can wear it while i destroy with my hpa . Lol