You're an awesome fabricator Chris. I have been working with steel for about the last 10 years and love it. Especially building race cars. Can't wait to see an awesome '69 ratty Charger tearing up $100k Porsche's and Vette's!
Alex. He doesnt like Editing. I'm sure he wont like that. His builds are killer and worth searching out. Or Just watch ever damn video he made. Like me. 😆
Couple of points dude I joined at I think 25 subscribers and watched every stage of beautiful Daisy coming back to life. Daisy needs to be Road legal dude that would be awsome. Final point straight swap the Tina rear for the Daisy it's a no brainer man plenty strong enough and screw waiting for parts
I came on board way back when you first started hard to believe it's been a year and a half, Time NEVER went that fast when I USED to be stuck welding inside a big tin can! 😌💨🏃🏃🏃😁
I bought my first car at 15 1/2 for 250 bucks A 1967 Charger 383 magnum and Loved it...not a Marlin chuckle ....drove it off the lot with no brakes ..no joke...but it was bad ass .!!!
Turbos!! Yars!! NOICE!! Superchargers don't generate the horses the turbos do... they're like old school turbos [first superchargers GM built for 2 stroke diesels back in the early 30's]. Cool Car man!
You have such good sheet metal work that you make things so perfectly factory looking its amazing. It sucks you have to redo so much when you already have such a nice looking suspension setup in it but why weld brackets to the new axle to make it fit when you could make it have the better stuff already on it first go around lol where did you learn how to do such good sheet metal work though?
Would like to see a few minutes spent describing your 4 link set up. I would like a 4 link without having to back half the car and I dont want a bolt in kit because it will never hold. As usual your racecar fabrication is off the charts. Sweet car Bro.
I need a '69 Charger so I can build a General Lee. Of course I will be getting a 440 V-8 with the original gear-reduction starter for it along with the 727 trans. Where do you find all your Chargers?
I just don't think that, kind of car should be drifted. Those cars when they came out were for driving. Maybe I am just old school. I am 56 years old I remember when these cars came out back in 69. Is there anything else you could do with this car? You could show it as daisy. Actually make it into a dukes of hazard car that would be cool
Nick's garage Love's Mopars check him out 70 Challenger all original 440 but as We Know old Challengers have rest everywhere so check him out this is your brother gregg here in Dallas Fort Worth
what, no Dana? I swore i saw 1 in 1 of your previous videos in your uncles junkyard yanked out laying across 1 of the 3rd gen. chargers you showed. oh well. ▪☆☆☆▪
Dave Lowell 8.8s are just as strong and more plentiful, basically a 9" - might be a better option, all he needs is a trac-loc carrier for 31 spline Axel's and whatever gear he chooses. They're so cheap to build.
You have such good sheet metal work that make car looks great
Damn, this cat deserves more subs.
I found your channel and I'm in love with changer I'm going to watch lot of your videos
GOOD to SEE progress...fabrication never ends....looks sharp. Thanks for the updates.
You're an awesome fabricator Chris. I have been working with steel for about the last 10 years and love it. Especially building race cars. Can't wait to see an awesome '69 ratty Charger tearing up $100k Porsche's and Vette's!
I try to tell every gearhead I know about this car and your channel. Everyone should know!
Douglas Bender thanks bud I appreciate it, I'm not good with the whole hash tag crap to make it more known
Been following you on Instagram for a while. Im mad at myself for not checking out your channel sooner! Much better content on here.
Thanks for the walk around, I've always wondered about that car. That thing is sick sick sick.
Plan on doing any top end events with that thing?? Love to see the MPH you could hit with that thing with the proper gear to get it there.........
Thanks Buddy, all I have to do to stay motivated is watch one of your videos!
Looking forward to this build, keep up the good work
Man Daisy is looking awsome!!! You do some killer work! You need a live cam. Lol
You should go through your videos and make a playlist for each car so we can watch them in order that would be awesome
Alex. He doesnt like Editing. I'm sure he wont like that. His builds are killer and worth searching out. Or Just watch ever damn video he made. Like me. 😆
Couple of points dude I joined at I think 25 subscribers and watched every stage of beautiful Daisy coming back to life. Daisy needs to be Road legal dude that would be awsome. Final point straight swap the Tina rear for the Daisy it's a no brainer man plenty strong enough and screw waiting for parts
Hey man I love the video I thank you for restoring these Dodge Chargers because I'm a Dodge Charger man myself I love Dodge Chargers
Cool man keep us updated love the Mopars
Great update. Looking Good.
I came on board way back when you first started hard to believe it's been a year and a half, Time NEVER went that fast when I USED to be stuck welding inside a big tin can! 😌💨🏃🏃🏃😁
Wow man, that car is trick. Looking forward to seeing the build...
I bought my first car at 15
1/2 for 250 bucks A 1967 Charger 383 magnum and Loved it...not a Marlin chuckle ....drove it off the lot with no brakes ..no joke...but it was bad ass .!!!
Turbos!! Yars!! NOICE!! Superchargers don't generate the horses the turbos do... they're like old school turbos [first superchargers GM built for 2 stroke diesels back in the early 30's]. Cool Car man!
Dam I hate having to redo things. But you gotta do what you gotta do
Excellent
Very sweet car, great video !!
love that yellow in the charger.
You have such good sheet metal work that you make things so perfectly factory looking its amazing. It sucks you have to redo so much when you already have such a nice looking suspension setup in it but why weld brackets to the new axle to make it fit when you could make it have the better stuff already on it first go around lol where did you learn how to do such good sheet metal work though?
this built is *ucking sick!!
Awesome looking good
One hell of a build man you're fucking awesome man one wild dude
Buddy great vid...... We're having to re-introduce ourself to Daisy. I'm sure the work will be great, so.. Stay cool.
So beautiful.....So dangerous
Daisy is going to be Fine !!!
Would like to see a few minutes spent describing your 4 link set up. I would like a 4 link without having to back half the car and I dont want a bolt in kit because it will never hold. As usual your racecar fabrication is off the charts. Sweet car Bro.
like what your doing with the look.
I need a '69 Charger so I can build a General Lee. Of course I will be getting a 440 V-8 with the original gear-reduction starter for it along with the 727 trans. Where do you find all your Chargers?
Its cool!! Are you going to fully restore evil in black? Id love to see the whole process... because I cant do that stuff myself lol
Nice... 👍👍👍👍👍👍
Does speedway actually do stub axles for corvettes that wont come undone and break if you put slicks and power through them?
Yeah man that's bad ass!!
Put the rearend from Daisy into the turquoise car. That should be plenty for it.
I thought that too, bur he must have other plans for it...
How is urs Daisy car coming along
Loved the video! Does anybody know if there is a channel similar for corvettes?
The corvette ben, great channel!
You really need a tv show.....
What size is your air compressor?
Is it large enough?
C'mon bro, GM G bodies are now up and comers, give that Cutlass some love! 😀
Didn't you rebuild the rearend for the turquoise car? What happened to it so quickly?
Frankie Hamilton old gears
I just don't think that, kind of car should be drifted. Those cars when they came out were for driving. Maybe I am just old school. I am 56 years old I remember when these cars came out back in 69. Is there anything else you could do with this car? You could show it as daisy. Actually make it into a dukes of hazard car that would be cool
Aaaah there she is! =)
Awesome! About fucking time Daisy gets some...
So... that’s where the chargers went... I’ve been looking for them.
Lmao but really idk where to find them
What rear end is in Daisy now? Is it an 8 3/4? I was always told those were comparable to a 9".
Looks like it. Stock vs stock I'd say they're similar, but the larger aftermarket for the 9" allows for a much stronger 9"
Very cool
hello i thought and if i'm wrong please tell me the smaller the blower wheel the faster the blower spins meaning more boost correct?
Correct
Instead of a panhard bar why not do a watts linkage?
Joe Fugate I might actually, I have a watts link setup too
@@junkerup You'd have to re-sience your sway bar, but it would eliminate the side to side action.
David Pinto I'm already swamped with work for awhile right now
Chargers are the coolest
Go dasiy soon💪🏼
so much awsomeness in a rotted out parts car lmao
"Screw it, I'm doing it" Heheheheh
Wish you where next door to my farm!! I have a charger SRT8 and a magnum SRT8 both with custom built 6.1! MOPAR or NO car!
Chris,need more video s m8 👍💔
You need to hook up with Mike Copeland from Diversified Creations. They built general mayhem with the hellcat motor.
Nick's garage Love's Mopars check him out 70 Challenger all original 440 but as We Know old Challengers have rest everywhere so check him out this is your brother gregg here in Dallas Fort Worth
Sweeet
what, no Dana? I swore i saw 1 in 1 of your previous videos in your uncles junkyard yanked out laying across 1 of the 3rd gen. chargers you showed. oh well. ▪☆☆☆▪
There can be only one, Ford 9 in all my cars.
Dave Lowell 8.8s are just as strong and more plentiful, basically a 9" - might be a better option, all he needs is a trac-loc carrier for 31 spline Axel's and whatever gear he chooses. They're so cheap to build.
Don’t lie it’s your cutlass
you need a bigger shop..lol..... you need some t -shirts that say "screw it , i need to do it" ..lol
Love your videos and your work but I would be concerned about someone planning on stealing, aren't you???
Rent a charger to your friend
Going to spend all this money and time then some Ugly Toyota will crash into you and total the whole it
Aaron Hayden
Negative Nancy
Aaron Hayden
it's a charger, and it's getting a rollcage... any silly little nissan or toyota will get smashed by this thing.