This was a very good tutorial on the major uses of different commands from within SolidWorks surfacing. He covered the major commands and the concepts of creating guide lines and how they work within lofting. The teacher gave enough information on why what he was doing and how he intended to approach the solution for the final drawing. So in my opinion not just a demonstration of technique, but also the teaching of such. Thanks.
Sin tener el programa y sin saber ingles se entiende muy bien , solo un poquito mas despacito estaría bien :) igual es muy claro el tutorial, gracias, saludos.
Hi Can you make videos on how to mak acm panels and folding with groove I can’t find any useful information on how to setup acm in solid works or inventor
During simulation...When adding pin, bolt or any other connectors... showing error....plzz enter value greater than or equal to 0 or less than and so on.....plzzz advise
Thank You! Thanks for the great video! Question how can we export SolidWorks creations to Blender or 3D Max without using STL which creates too many polygons? Is there any other solution so that there is no explosion of polygons in the export? Thank you Stéph. Merci superbe vidéo! Question comment peut on exporter des créations sous SolidWorks vers Blender ou 3D Max sans passer par le STL qui crées trop de polygones? Y a t-il d'autres solutions afin qu'il n'y ai pas d'explosion du nombre de polygones dans l'exportation? Merci bien Stéph.
Bonjour je vous suit depuis quelque temps sur vos tuto vidéo et actuellement celle-ci pas à pas mais comme je comprend pas votre langue j'aimerai connaitre le raccourci clavier pour faire une courbe à partir de la ligne à 6:04 merci d'avance pour votre aide.
Not sure what you mean by "it starts in the right plane instead of the front plane". Most of the time it does not matter what plane you start your threads from unless is is demanded by the person is receiving the drawing. I looked in your profile, but could not find an email address so I can not reply directly to you with pictures. If you still need help, look up my email address in my profile and write to me directly.
Does anyone know how to check in SolidWorks the volume of the liquid that would fill the bottle? And not the whole bottle, but to a point under the cap, like how it would be filled in real life.
You could just create a block surrounding it (deactivate merge entities when doing so), then subtract the bottle from it and delete the external part of the subtract. You will end up with a geometry that represents the volume of the liquid filling the bottle to the brim
Please return to time 0:29 of video ,press pause and make screenshot .Next save file and you will edited to use with exercise.I so do it .I use Irfan View to make screenshots.
I like the channel, but not sure about this being a good surface tutorial. Could have just as easily been done with solid features. This doesn’t highlight the power of surfacing very well.
You are right, it could have been done as a solid, but it would have been much harder since the front and back of the bottle are not flat, but curved outwards. I also think the intent of the video was to demonstrate the basic functions of surfacing.
This was a very good tutorial on the major uses of different commands from within SolidWorks surfacing. He covered the major commands and the concepts of creating guide lines and how they work within lofting. The teacher gave enough information on why what he was doing and how he intended to approach the solution for the final drawing. So in my opinion not just a demonstration of technique, but also the teaching of such. Thanks.
Díky!
17:38 This is the moment when I said "¿Why didn't I think of that before?"
7:30
Jajaja 😹
You can also use the chamfer and fillet tools to do this as well, but this way works even for more complex thread cross-sections.
Absolutely YES! 🤣🤣🤣
Excellent SOLIDWORKS Channel!
Welcome back Sir. Hope everything is well. Thank you for sharing your knowledge. 👍
Thank for guidline, long time forget about this tools.
Thanks! wonderful SOLIDWORKS instructing videos! 😎
Wow nice tutorial sir 👍👍
You have the best tutorials
can you make a tutorial on how to make a clutch, such as a spiral jaw clutch, centrifugal clutch, cone clutch and other clutches please
Any vacants for sollid works
Came out great, thank you!!
Thank you very much sir 😊
Sin tener el programa y sin saber ingles se entiende muy bien , solo un poquito mas despacito estaría bien :) igual es muy claro el tutorial, gracias, saludos.
Good video 👍
thank you sir your video really helped me
The best videos 💯👌🏻
What can i do to become like youuu, proud of youuuuuuu. You make me feel this software's.
Can you please make a video on electric motor engine design ??? Plss can u upload it as soon as possible ...
Highly requested..
Nice tutorial i like this
Awesome
Nice sir ❤️
very good design thanks for the video!!!
well explained!
Nice video, thanks :)
thank you
good job
Great
Thanks for this
Thanks
I love it dude
Have you tried solidworks 2021 in windows 11 and is it working good?
Sir pls hme ye bataiyr ki background ka cammand kaha se enabl kre pls jisme aaap white plane select krte h mere me show nhi ho rha pls sir....
Hi
Can you make videos on how to mak acm panels and folding with groove
I can’t find any useful information on how to setup acm in solid works or inventor
During simulation...When adding pin, bolt or any other connectors... showing error....plzz enter value greater than or equal to 0 or less than and so on.....plzzz advise
STUCK permanently at the 3 point arc in the beginning cant align symmetry option to do so does NOT pop up
Thank You! Thanks for the great video!
Question how can we export SolidWorks creations to Blender or 3D Max without using STL which creates too many polygons? Is there any other solution so that there is no explosion of polygons in the export? Thank you Stéph.
Merci superbe vidéo!
Question comment peut on exporter des créations sous SolidWorks vers Blender ou 3D Max sans passer par le STL qui crées trop de polygones? Y a t-il d'autres solutions afin qu'il n'y ai pas d'explosion du nombre de polygones dans l'exportation? Merci bien Stéph.
Hello sir,
Can you make a tutorial on Configuration option briefly for beginners...
Thanks in advance.
Bonjour je vous suit depuis quelque temps sur vos tuto vidéo et actuellement celle-ci pas à pas mais comme je comprend pas votre langue j'aimerai connaitre le raccourci clavier pour faire une courbe à partir de la ligne à 6:04 merci d'avance pour votre aide.
Can you make a tutorial for GD & T
Thanx
Nivce video will be great to can possible download the file
Please make wood door design videos.
thx
can you make a tutorial hand grep mp 4
Sir can you please tell me by profession who you are?
Maybe Mechanical engineer
Can you help me fix this error: when I set the start angle of helix at 0 degree, it starts from front plane instead of right plane ?
You need definition a New plane with offset 0.1in and then make a new sketch with converted circle.
Not sure what you mean by "it starts in the right plane instead of the front plane". Most of the time it does not matter what plane you start your threads from unless is is demanded by the person is receiving the drawing. I looked in your profile, but could not find an email address so I can not reply directly to you with pictures. If you still need help, look up my email address in my profile and write to me directly.
Sol poket roket bike design ka video banayi ye sir
Pening Gak eh dgn India ni buat, tam paham akum
How much per a course ?
Доступно и понятно
Solidworks của tôi trong Cut không có tùy chọn Scope, ai đó giúp tôi.!!!
Who is watching in 2024
Make a Mazda Rotary 13B Engine!
Please provide pdf of soild excerice
Does anyone know how to check in SolidWorks the volume of the liquid that would fill the bottle? And not the whole bottle, but to a point under the cap, like how it would be filled in real life.
You could just create a block surrounding it (deactivate merge entities when doing so), then subtract the bottle from it and delete the external part of the subtract. You will end up with a geometry that represents the volume of the liquid filling the bottle to the brim
How to install cad in ubuntu os
Sir, can you please share a pdf for practice
Make a screenshots with drawing and print .Is a problem for you?
@@RonAdamsky dear I want practice set for exercise, if you have kindly share the same
Please return to time 0:29 of video ,press pause and make screenshot .Next save file and you will edited to use with exercise.I so do it .I use Irfan View to make screenshots.
@@RonAdamsky thanku bhai, maine ye design bana liya hai, I want more practice set. 500-600 design ho jisme
You could've done that with Solid tools bro! Why do you hassle so much using surfacing tools?
Hello sir
Please provide pdf of soild excerice 96
Fillet the Steak
Please draw a car using surface tool
Sri i need software sri
I like the channel, but not sure about this being a good surface tutorial. Could have just as easily been done with solid features. This doesn’t highlight the power of surfacing very well.
You are right, it could have been done as a solid, but it would have been much harder since the front and back of the bottle are not flat, but curved outwards. I also think the intent of the video was to demonstrate the basic functions of surfacing.
show