loved this problem fix idea on you tube ..enjoyed the video. i don't use any tv features i only use hdmi from my pc ..recently it has started to do a cycle . The sound stops and picture pauses then after that there is a black screen like a reset and there's a LG logo and back to normal. some times it does it every 2 mins sometimes every 20 mints, sometimes it just works normally. but it is defanatly getting worse .
my LG UHD tv is stuck in boot loop but it is not consistent, some days it cooperates and turns on while other days it stays in a persistent boot loop for hours on end. I have already tried resetting it to base firmware and updating to latest version from the GUI of the tv connected to wifi. I have also tried power cycling tv by pressing the only button (power) while the tv was unplugged for a few mins. Do you have any idea what it could be?
I have problem with my LG TV....the logo show's on start up screen and nothing else.How can I try to reinstall system with usb memory?! Thank you in advance.
If you have the first problem, first disconnect the antenna cable and then the power cable. then press and hold the power button for 10 seconds. then plug in the power cord. The TV may not work the first time. try again. When the TV turns on and the no signal logo comes on, the TV will improve. If you plug in the antenna cable again, the same problem will occur again after a while. I haven't tried it yet but if you use an external satellite receiver the problem will be resolved.
I have one query. Recently purchased nano86 55 inch. I have noticed one thing let me know its problem or normal. When I shut down tv with remote red light glow then Again I switch on it switches on normal but when I frequently do on or off tv takes time to switch on after pressing remote button says 5 to 10 aeconds. Secondly I was using lg thinkq app. Tv got freezed n restarted. Should I call service or ask for replacement
I have LG 70UF7300 that's stuck on LG logo after software update. Tried everything. Told by local repair shop the main has to be replaced but I think they say the most easiest money maker solution over the phone. I'd like to reload software if possible for my TV. Any help appreciated.
Hi unplug the tv power cable from wall and hold tv power button/ remote power button. Wait few minutes then plug in back and recheck the tv. If not work then need to repair the main board. Thanks for subscribe like and share this video with your friends.
With mine most of the time it won’t come on at all but the green power light is on. When it does come on the picture is great, sound is fine but it will reboot back to the LG logo and reboot to whatever we’re watching. It does it so often we can’t watch it usually. Sometimes it will go maybe 10mins or so sometimes it’s every few seconds it does it. Would that be the power board or a capacitor?
thanks guys i have an LED LG43LF630V which starts an endless rebooting after few minutes of normal working.... i wonder if it,s a PSU issue or it s the main board.... thanks for your cooperation
Hello, after a recent software update, my LG 50UK6500 from Costco approx. 2 years ago has basically lost its smart TV functionality. It won’t run any apps because it states they need to update, but I every attempt to use the LG store or any smart TV feature and it just crashes. Also, navigating the menus is extremely grainy and the text is distorted and mostly unreadable. All that being said, any sort of HDMI input is crystal clear, so it is only the smart TV features that are unusable. My hope is to revert to a previous version, but apparently the more recent updates to webOS make this impossible. I've already reset settings unplugged and held the power button etc etc
lg smart tv 32lj573d after resetting tv not loading in to home screen after pressing the power turn on button red light blink 3 times then very dim lg logo it takes 2 mins to start then c01 number comes on the left top Conner then it shows this message Loading... it will take about 30 seconds to load Home and restart
Hello I have an LG 47LE5400 UC and after a firmware update on my laptop my monitor quit working. it powers on and shows the LG logo but doesn't respond to input. the remote works to turn it off and on but it ignores everything else. I've tried unplugging and letting it sit for a while. I tried using a FAT formatted usb drive with the firmware on it and it doesn't respond to that either. When I plug in the usb i dont get any lights on the usb which lights up when its connected to my PC. Its basically just stuck on the LG logo screen and wont do anything. Is it a bad chip?
hi i change the philips tv from lamp to led but tv doesn't go green only red . i think i need to disable open lamp protection but i cant find how to. The board DPS-168BP chip DDA001A
I have a lg uh5500 65 inch 4k I don't have the factory remote and I don't have the power plug I used my Xbox one s power plug to power it on it just has led red blink 3 times and stay lit how do I fix this?
I tried putting the firmware on a USB to plug into my TV but because it keeps rebooting after the logo, it never gets to load the drive. At one point, my TV actually manage to make it all the way and it asked me if I wanted to install the firmware from my USB but by the time I held the remote, it rebooted again. It never went back there again. Any ideas? I have a LG 49LF5900 model.
Hi, my LG 65 inch tv will not go pass the initial setup screen after I had done factory reset on it. I had done that because I lost sound on my tv and the apps stopped working all of sudden. I saw a video said to reset to original factory setting. Now the tv is stuck and I can't go pass the screen "Where are you. Confirm your location and language settings." can someone please help me. Thanks
My LG TV when I press power button, the LED light starts blinking as if it's booting up but there is no picture and no sound. The red LED light just keeps blinking slowly and that's it. What could that be?
Hi! I have a LG 42LN5400. When I plug the TV in, than the LG logo flashes, and after them i can't nothing to do with, the TV doesnt reacts any buttons (on TV also). Only black background light. Have you any idea, how can i fix it? Greeting from Hungary!
I Have an LG Smart TV stuck at LG Logo. Tried unplugging it for 10minutes, same thing. I think the firmware is corrupt, but how do I get the tv to install the firmware from USB? I plug it in and it does not read the usb drive. Do I need to enter service menu? How do I do it from the smart remote? 65UH603V
Mitashi Tv startup window is coming and then after 1 min automatically getting power off ......power button is showing red stand by mode . Wt is yhe exact problem pls reply
Firmware failure or main board problem. Please try to update the firmware via usb drive and if not work then repair the main board capacitor. Any difficulties please let us inform and subscribe the channel. Please share this helpful video with your friends and social media for helping others
@@FIXNETFLIX i am trying to update through usb but tv is not reading from usb i think same thing happening .....wt i did is i have downloaded CV638H-A42 firmware same copied into usb and inserted to tv and switched on the power button but same thing happening after startup screen it is switching off
Hi, My LG UHD Tv goes crazy when I set a video in 4k, the image goes crazy and start displaying green and other colors(1080p video playback works perfect). And now the menu gets stuck.
Hi my TV is stuck in some sort of boot loop, it's an LG TV with only 1 button on the TV which is power. I've tried unplugging it for a while and plugging it back in but as soon as its plugged back in the boot loop restarts. Is there a way for me to factory reset this? I cant get into the TV settings because of the loop.
Hi cody fray, your tv has firmware update failure issue. So please update firmware file via usb drive. No need to apply reset to factory default. Any troubleshooting support needs please feel free to ask me. Please keep in touch with our channel and share this helpful video with your friends and social media for helping others.
My LG lcd issue When I start the tv LG logo is coming but in few seconds slowly slowly tv screen is shutdown...and sounds is coming but not showing screen... Why
Hello everyone I would appreciate it if someone can help me with my 43" LG smart TV, it starts on its own directly to UA-cam, and sometimes when I'm watching a program the tv restarts, I don't know whats the problem, I've replaced batteries of remote and checked the timer, and still the same, can anyone tell me whats going on with my TV
Hi iam having one solution if ur using fire stick then remove it from tv and then on it may work Once try. Here after few mins again u can connect fire stick
Unplug the tv power cables for 10 minutes and recheck the issues. If not work then try to reset manually the tv. And reinstall tv firmware update via usb drive. If not work that’s hardware issues. Any difficulties please let us inform and subscribe the channel. Please share this helpful video with your friends and social media so that others can take benefit from the video.
Hi, were you able to resolve the problem? I have exactly the same model as yours and every time it is turned off, I have to retune the tv to find the programs.
@@Not_really unfortunately not it keeps turning on even without me turning it on from the remote or the actually TV. It then proceeds to show the logo then a grey screen then back off again rinse and repeat. Unlock with yours?
Hi guys! I have a question: if the TV is stuck on logo screen, how can I upgrade the firmware with an USB key? Thanx!
loved this problem fix idea on you tube ..enjoyed the video.
i don't use any tv features i only use hdmi from my pc ..recently it has started to do a cycle . The sound stops and picture pauses then after that there is a black screen like a reset and there's a LG logo and back to normal. some times it does it every 2 mins sometimes every 20 mints, sometimes it just works normally. but it is defanatly getting worse .
my LG UHD tv is stuck in boot loop but it is not consistent, some days it cooperates and turns on while other days it stays in a persistent boot loop for hours on end. I have already tried resetting it to base firmware and updating to latest version from the GUI of the tv connected to wifi. I have also tried power cycling tv by pressing the only button (power) while the tv was unplugged for a few mins. Do you have any idea what it could be?
Yeah same problem did u fix it?
I have problem with my LG TV....the logo show's on start up screen and nothing else.How can I try to reinstall system with usb memory?! Thank you in advance.
My lg 42lb630v stuck on logo screen can’t go to settings or function in any way.
How do I boot up the USB once I load it with the later firmware?
If you have the first problem, first disconnect the antenna cable and then the power cable. then press and hold the power button for 10 seconds. then plug in the power cord. The TV may not work the first time. try again. When the TV turns on and the no signal logo comes on, the TV will improve. If you plug in the antenna cable again, the same problem will occur again after a while. I haven't tried it yet but if you use an external satellite receiver the problem will be resolved.
I have one query. Recently purchased nano86 55 inch. I have noticed one thing let me know its problem or normal. When I shut down tv with remote red light glow then Again I switch on it switches on normal but when I frequently do on or off tv takes time to switch on after pressing remote button says 5 to 10 aeconds. Secondly I was using lg thinkq app. Tv got freezed n restarted. Should I call service or ask for replacement
I have LG 70UF7300 that's stuck on LG logo after software update. Tried everything. Told by local repair shop the main has to be replaced but I think they say the most easiest money maker solution over the phone. I'd like to reload software if possible for my TV. Any help appreciated.
Hi unplug the tv power cable from wall and hold tv power button/ remote power button. Wait few minutes then plug in back and recheck the tv.
If not work then need to repair the main board.
Thanks for subscribe like and share this video with your friends.
Can I use this troubleshooting on other TV Brands?
With mine most of the time it won’t come on at all but the green power light is on. When it does come on the picture is great, sound is fine but it will reboot back to the LG logo and reboot to whatever we’re watching. It does it so often we can’t watch it usually. Sometimes it will go maybe 10mins or so sometimes it’s every few seconds it does it. Would that be the power board or a capacitor?
thanks guys
i have an LED LG43LF630V which starts an endless rebooting after few minutes of normal working.... i wonder if it,s a PSU issue or it s the main board.... thanks for your cooperation
Hello, after a recent software update, my LG 50UK6500 from Costco approx. 2 years ago has basically lost its smart TV functionality. It won’t run any apps because it states they need to update, but I every attempt to use the LG store or any smart TV feature and it just crashes. Also, navigating the menus is extremely grainy and the text is distorted and mostly unreadable. All that being said, any sort of HDMI input is crystal clear, so it is only the smart TV features that are unusable.
My hope is to revert to a previous version, but apparently the more recent updates to webOS make this impossible. I've already reset settings unplugged and held the power button etc etc
Me to
lg smart tv 32lj573d after resetting tv not loading in to home screen after pressing the power turn on button red light blink 3 times then very dim lg logo it takes 2 mins to start then c01 number comes on the left top Conner then it shows this message Loading... it will take about 30 seconds to load Home and restart
Hy, my tv LG 55" is stuck on boot logo. I hv tried to unplug and press n hold power button but no change,please assist
Hello I have an LG 47LE5400 UC and after a firmware update on my laptop my monitor quit working. it powers on and shows the LG logo but doesn't respond to input. the remote works to turn it off and on but it ignores everything else. I've tried unplugging and letting it sit for a while. I tried using a FAT formatted usb drive with the firmware on it and it doesn't respond to that either. When I plug in the usb i dont get any lights on the usb which lights up when its connected to my PC. Its basically just stuck on the LG logo screen and wont do anything. Is it a bad chip?
My LG 49lh541t-TD keeps rebooting when i plug it in, please help me thanks
hi i change the philips tv from lamp to led but tv doesn't go green only red . i think i need to disable open lamp protection but i cant find how to. The board DPS-168BP chip DDA001A
I have a lg uh5500 65 inch 4k I don't have the factory remote and I don't have the power plug I used my Xbox one s power plug to power it on it just has led red blink 3 times and stay lit how do I fix this?
Fees charge for firmware update
I tried putting the firmware on a USB to plug into my TV but because it keeps rebooting after the logo, it never gets to load the drive. At one point, my TV actually manage to make it all the way and it asked me if I wanted to install the firmware from my USB but by the time I held the remote, it rebooted again. It never went back there again. Any ideas? I have a LG 49LF5900 model.
Hi, my LG 65 inch tv will not go pass the initial setup screen after I had done factory reset on it. I had done that because I lost sound on my tv and the apps stopped working all of sudden. I saw a video said to reset to original factory setting. Now the tv is stuck and I can't go pass the screen "Where are you. Confirm your location and language settings." can someone please help me. Thanks
My LG TV when I press power button, the LED light starts blinking as if it's booting up but there is no picture and no sound. The red LED light just keeps blinking slowly and that's it. What could that be?
Posibly dead leds in backlight.
Hi! I have a LG 42LN5400. When I plug the TV in, than the LG logo flashes, and after them i can't nothing to do with, the TV doesnt reacts any buttons (on TV also). Only black background light.
Have you any idea, how can i fix it? Greeting from Hungary!
Hi did you fix your problem?...mine is going through the same problem
I Have an LG Smart TV stuck at LG Logo. Tried unplugging it for 10minutes, same thing. I think the firmware is corrupt, but how do I get the tv to install the firmware from USB? I plug it in and it does not read the usb drive. Do I need to enter service menu? How do I do it from the smart remote? 65UH603V
Mitashi Tv startup window is coming and then after 1 min automatically getting power off ......power button is showing red stand by mode . Wt is yhe exact problem pls reply
Firmware failure or main board problem. Please try to update the firmware via usb drive and if not work then repair the main board capacitor.
Any difficulties please let us inform and subscribe the channel.
Please share this helpful video with your friends and social media for helping others
@@FIXNETFLIX i am trying to update through usb but tv is not reading from usb i think same thing happening .....wt i did is i have downloaded CV638H-A42 firmware same copied into usb and inserted to tv and switched on the power button but same thing happening after startup screen it is switching off
Hi, My LG UHD Tv goes crazy when I set a video in 4k, the image goes crazy and start displaying green and other colors(1080p video playback works perfect). And now the menu gets stuck.
Which is main board how we will find that
My LG TV your video show in 1problem please solve and tell me how cen do. LG tv model . 32LJ616D
Hi my TV is stuck in some sort of boot loop, it's an LG TV with only 1 button on the TV which is power. I've tried unplugging it for a while and plugging it back in but as soon as its plugged back in the boot loop restarts. Is there a way for me to factory reset this? I cant get into the TV settings because of the loop.
Hi cody fray, your tv has firmware update failure issue. So please update firmware file via usb drive.
No need to apply reset to factory default.
Any troubleshooting support needs please feel free to ask me.
Please keep in touch with our channel and share this helpful video with your friends and social media for helping others.
@@FIXNETFLIX -can you help me with problem with LG 32lb650v?!
The logo just stands on screen.What I can try?!
How to do it by usb can u explain the step
I tried to apply firmware update to my TV due to problem1 issue. Main board is not able to read my USB. Any reference to boot menu in WebOS
What 16 GB pendrive will not work?
is it an issue that my usb is 16gb??
Had the telly two years, Was £800 pounds.. Can't be bothered with all that rubbish... Time for a new one... Missed the snooker,
My LG lcd issue
When I start the tv LG logo is coming but in few seconds slowly slowly tv screen is shutdown...and sounds is coming but not showing screen... Why
Hey did you got any solution? I am suffering with the same problem.
Hello everyone I would appreciate it if someone can help me with my 43" LG smart TV, it starts on its own directly to UA-cam, and sometimes when I'm watching a program the tv restarts, I don't know whats the problem, I've replaced batteries of remote and checked the timer, and still the same, can anyone tell me whats going on with my TV
plz software link send sir
Hi iam having one solution if ur using fire stick then remove it from tv and then on it may work
Once try. Here after few mins again u can connect fire stick
firmware lg 47ld751 ?
My LG TV lag a lot
My lg smart tv stuck on lg logo
Unplug the tv power cables for 10 minutes and recheck the issues. If not work then try to reset manually the tv.
And reinstall tv firmware update via usb drive.
If not work that’s hardware issues.
Any difficulties please let us inform and subscribe the channel. Please share this helpful video with your friends and social media so that others can take benefit from the video.
FIX NETFLIX this method for the 10 min reset didn’t work but I’m trying to fix the tv without all the extra motherboard stuff
@@FIXNETFLIX Please help me with firmware update , As I tried main board unable to read USB
Hi
Our TV turned on but only shows black display and cursor
i have a LG 49L F540V 49IN and keeps showing the logo a grey screen for a few seconds then switches off why does it do that and how could i fix it?
Hi, were you able to resolve the problem? I have exactly the same model as yours and every time it is turned off, I have to retune the tv to find the programs.
@@Not_really unfortunately not it keeps turning on even without me turning it on from the remote or the actually TV. It then proceeds to show the logo then a grey screen then back off again rinse and repeat. Unlock with yours?