Check out my unboxing of the ACTUAL JPerm RS3M 2020 here: ua-cam.com/video/O95rZdESKbM/v-deo.html I talk about how this cube I made compares to the actual one! Hope you guys enjoy it! :)
Does this setup last long? Also do you need to lube the tracks of the cube like in Jperm’s speed cube setup vid (where he lubes just the tracks of one piece with weight 5)?
Nice video Ram! I tried this on my RS3M 2020 today and HOLY COW, I am not kidding, this is one of the best cubes I have owned. I totally recommend it to new Cubers. Also, this is the 200th comment on this video so if you see it, then please reply.
normally you want to put in 6 drops by stretching a side and then putting the lube in, and you should refill the lube when it feels like its losing performance
HOLY COW i tried this and i liked my cube even better!!! its like u bought a new cube with a different setup like WOW. but the downside of it is that its a little bit messy with the lubing but all in all the setup is good its a 100/10 for me
i tried this using similar lubes i have, and it sucked lmao the cube turned out so slow, i had to wipe it all off and lube it again. maybe 24 drops of fast lube + 4 drops of slow lube isn't a good idea or maybe it only works with SCS lubes idk
@@cubedude1710 yea in my opinion you should never ever make your cube slower by tensioning it (maybe 1 or 2 but never over). Its better to make it slow by lubes.
@@talentedcuber oh okay. Unfortunately I wasn’t sure at the time, so it wasn’t really in my control 😅 I’ve ordered another JPerm cube though now, let’s hope it comes.
How many drops of lunar do you recommend to put? Also great vid thx now I’m able to save a lot of money instead of buying a gan lol Edit: oh also before putting the lube and all should I clean my cube so there’s no dust in it?
Bhai ap kitne amir ho ye batao cube lelo ek chize hai shayad jo free shipping karti hai aur Indian hai matlab me definitely itna Amir nahi ki 17 dollars siraf SHIPPING ke liye de sakta hu.
🐏 🐏 🐏 🐐 🐐 🐐 J Perm RS3M 2020 Pog Ram Pog Me no Pog JPerm Fast Ram Fast RS3M 2020 Me Slow Great Video tho! And I feel that with 1-2 drops of stardust, you will feel it might be a main contender! (Me Imaging Ram Maining a very cheap but good $9 cube: 💀💀)
Check out my unboxing of the ACTUAL JPerm RS3M 2020 here: ua-cam.com/video/O95rZdESKbM/v-deo.html
I talk about how this cube I made compares to the actual one! Hope you guys enjoy it! :)
why dont u loosen it to 5 or 3-4 it wont make much of a difference when it is at 5 right
and dont u think u put a little too much weight 1, 4 drops on each center piece
Does this setup last long? Also do you need to lube the tracks of the cube like in Jperm’s speed cube setup vid (where he lubes just the tracks of one piece with weight 5)?
@@smaransure2234
Nice video ram
Thanks!
Hi cuberazn copy kid
Hi cube for speed I am a big fan!
OMG i am big fan
@@bablikanu9563 cuberazn is the copy
Great video Ram! Do you ever think that you’ll have a signature cube? Maybe a Ram 2x2???
Thanks! I really hope someday :P
How do I keep finding you... You're everywhere... 😨
😊😊
😂
I guess I’m just special.
OMG RAM YES WE NEED A RAM MGC ELITE
I’m really hopeful for this!
A video that everyone needed but no one made (great video as always 😃)
Thanks! I’m glad it helped :)
True
Can the spring i lube with v2 moyu lube or qiyi mofangge m lube?
Can I use Adheron light and heavy if so how many drops on corner piece and center
Nice video Ram! I tried this on my RS3M 2020 today and HOLY COW, I am not kidding, this is one of the best cubes I have owned. I totally recommend it to new Cubers. Also, this is the 200th comment on this video so if you see it, then please reply.
what about the screw? i already screwed it, and i dont know how was it
Awesome video ram, got a new sub! Btw I don’t think he put 6 drops of lunar on the pieces bc I didn’t see jperm do it
Hey guys I need help my rs3m has spring noise I have the qiyi lube should I add it on spring or just in cube
can you do a video with turning a rs3m 2020 into a maglev super rs3m 2022
Nicee video ram 👍🏼
Ok bro 😎
Amazing tutorial Ram!! Loved it! It was so helpful! Awesome edits bro 🔥🔥🔥
Thank you Charged! Glad it was helpful! 🙌
Please make a video on how to improve turning like locking up less and spamming tps
i may not have a weight 1 lube but i do have a speedy lube, can i use a controllable lube instead for weight 1?
Hey ram how did u get this angle to record video like jperm angle pls tell me
can you provide the link to buy the traxxas 10k, could you also tell how much it costs in INR and how much it is (in ml)
Regularly love your videos!!😍
Thank you!! :)
Bro can you suggest me a lube under 5 dollars which makes the cube more fast in cubicle pls
Bro please tell from where you got traxxas ?
wow this is a great tutorial but since I dont have lunar, I used dnm-37 do u think it is still ok
Can I do this with the moyu wrm?
yes
@@RamThakkar ty!!
"That's completely fine because I got some content" it is the right line.
Well even if I got the JPerm cube I would still have content but ok 😂
bro whats the replacement to the lubes from cubelelo????
You can use cubelelo weight 1 for the traxxas 10k. But i think lunar you must buy
Whats the blue thing?
hey thanks for featuring me in the thumbnail & description!
Thanks so much for sending me the picture, Crim!!
Where did u buy the traxxes oil in india
Can i do the cosmic loop to in it ?,with the same but a athor lube?
so u can just get the maglev and u dont have to put lunar in the middle, and what does weight 1 do to the cube
it makes your cube controllable, and yes you don't need to put it if you have MagLev
Hardest part is to deal with the tension. You need to get perfect tension till you get 45 degree corner cutting.
Most cubes still have near perfect corner cutting, even when tight
how can i get traxxas lube in Philippines :(
Thanks bro that's what i need about lubing.
The wrm now?
Should the spring compression be on 7 th setting after lubing?
you may do that, you can do it before or after
best cube ever i can confirm
Man liked it so much that he has officially taken it as his main 3x3 :P
when you get a J perm cube, maybe you can make a compare then and see how well the DIY Jperm setup holds up against it!
That’s the plan! I’m getting an actual JPerm cube soon hopefully!!!
@@RamThakkar That will be interesting.
Bro plz tell best budget speed cube
The RS3 M 2020 for sure.
Is 4 drops for each center
a bit over? I just don’t want to waste any lube. And how long do I have to wait until I lube it again?
normally you want to put in 6 drops by stretching a side and then putting the lube in, and you should refill the lube when it feels like its losing performance
its not wasting, it makes the cube silent and faster
Thank you for the video! We have same weight 1 btw. The process is good.
Edit: is the setup temporary?
well the lubricant obviously is but the spring customizations stay until you change it
HOLY COW i tried this and i liked my cube even better!!! its like u bought a new cube with a different setup like WOW. but the downside of it is that its a little bit messy with the lubing but all in all the setup is good its a 100/10 for me
Wipe the outsides of the cube so it isn't covered in lube.
Hey Ram, are u really sure that he has used only these two lubes.
i tried this using similar lubes i have, and it sucked lmao
the cube turned out so slow, i had to wipe it all off and lube it again. maybe 24 drops of fast lube + 4 drops of slow lube isn't a good idea
or maybe it only works with SCS lubes idk
24 drops is the problem bro, don’t overlube
what happens if u use less weight 5 insted of weight 1?
it'll work but likely be a bit slower.
Are you going to noida cube open 2022?
Yes I am.
@@RamThakkar looking forward to seeing you there
Jperm after watching this video: You piece of shi-
-t
Yikes
@@RamThakkar you deserved to be in tingman's song
@@rudranshbameta7582 he is in it
@@rudranshbameta7582 I was in it :)
I tried this setup and my cube feels AMAZING!!!
I don't understand how tensions level 7 is good. I literally have mine on 0 and it's so slow.
@@pumpkinut5314 I put mine on 0 or 1 but still fast
@@cubedude1710 yea in my opinion you should never ever make your cube slower by tensioning it (maybe 1 or 2 but never over). Its better to make it slow by lubes.
Pumpkinut its probably because you put a little bit to much weight 1 but its just an opinion on if you like it or not
Ram is speed cube shop deliver cubes in India if yes any duty or tax charges includes when buying cubes
i
I mistakenly put oil in my RS3M 2020 what should I do please help..Now it's hard to turn
What lube should I use if I don’t have lunar
Stardust
Ok thanks
Can teach us ur Rubik's loop?
Bro can you suggest me a lube under 5 dollar which makes the cube very faster
Stardust is 5.95 but it’ll do exactly that.
Adheron lite, like 2$ for a 20ml bottle
I love your "alright" 😅 (And your videos ofc)👌
LOL thank you NZ! :P
Bro any other lubes can be used instead of lunar anyother means not from speedcube shop any other lube
Which one do you recommend lunar or Stardust?
Lunar is good if you want moderately fast. Stardust is good if you want smth really fast. I’d suggest Lunar.
@@RamThakkar Thanks!! also googluck for your comp tommorrow
@@rudranshbisht2985 thank you!
Man great vid but , what did u actually mean on putting 6 drops of lunar on pieces , is it tht we have to put 6 on each piece ?
it depends, you can put six drops in one spot, or 1 drop in almost every place
Gr8 video ram!
Thanks!
OH MY GOD! IT IS SO GOOD (and silent)
You have to appreciate the person who makes the custom cubes. Doing 1 cube looks so tiring.
What are your main WCA puzzles
What event?
Love your videos! ❤
Thanks man!
When you do t perm on j perm cube
Dylan : SUCCESSFULLY TRIGGERED
I should do the OOPS Method to make him happy.
@@RamThakkar haha I hope so
XD
story line is perfect
Came from tingman's latest vid
And realised u r awesomeeeeeeeeeee3eeeeeee
:-)
Thank you for coming!! I’m glad you enjoyed :)
same , i have subbed him now :D
That’s literally the opposite of your name tho 💀
@@criccreationz6107 😂 lol
This is something I wanted because I have just ordered a RS3M 2020. Btw Nice Video.
Fantastic! Thanks! :)
great efforts
Thanks!!
Hey Ram My name is also Ram what software do you use for editing
Hi Ram. I use FCPX.
Thanks Ram Thakkar
Do you know full oll?
Haha there are a few random algs I’m missing here and there 😂
ty bro......keep it up! Love from Pakistan
yo ram are u going to make a dc server ?
probably after my IB Boards.
I tried this and before I’m done, I give it a 7/10 or 8/10
But like a critics 7/10
Nice video!
Thanks!!
@@RamThakkar also I think you should tag J perm
But He is subbed to you already so he might have seen (emphasis on might)
Good video!
Welcome to Tamil Nadu on 12th I will try to come to comp as iam close by in chennai
Thanks! Hope you can come.
@@RamThakkar but the participant list is maxed so I can't attend but can I just come to see the ev6
@@maybegamer645 oh sad. Hopefully you can compete next time!
@@RamThakkar yeah I hope too
I really love your videos
Thanks so much!! :)
What is the editor you use, is it free, and is it compatible with Windows 10? Thanks so much, and an amazing video!
Thanks! I use Final Cut Pro (which is paid and Apple only) but I’d recommend DaVinci Resolve, it’s free and great.
@@RamThakkar Thank you! My editor, Kdenlive, was too slow, and I've heard great things about DaVinci, this is what I needed to switch.
i wish scs was on my side with me and all cubers
Can i use speed live weight 3?
Can we use cubicle lab weight 3 or weight 4 instead of traxxax 50k
well it won't be a jperm cube anymore but you can use any lube
Lucky you for being able to get SCS lubes for free
Why make a JPerm cube when you can make a Ram cube? Tutorial plz sir 🙏
Someday my friend :P
He thinks its fine but its not be cause the regular rs3m is only 9$ and the jperm rs3m is 25$
Can I use 30k instead of 10k?
you can, but it wont be a jperm cube anymore
Nooo! I've never been so clickbaited!
Sorry but how is this clickbait? 😅
In the big unboxing video, you said that you had the Jperm RS3M 2020, but you actually had the original RS3M 2020
@@talentedcuber oh okay. Unfortunately I wasn’t sure at the time, so it wasn’t really in my control 😅 I’ve ordered another JPerm cube though now, let’s hope it comes.
so...you're not gonna replace it for a regular J-perm rs3m :)
I also ordered a new JPerm RS3 M and I’ll be comparing the 2 :)
How many drops of lunar do you recommend to put? Also great vid thx now I’m able to save a lot of money instead of buying a gan lol
Edit: oh also before putting the lube and all should I clean my cube so there’s no dust in it?
Np! 6 drops on pieces and 4 drops in screws. Yes, it would be a good idea to clean it beforehand btw.
Only if its dirty from use
I did it for the yoo cube
Yoo Cube and JPerm Rs3m are both equally as good!
That’s true
U forgot the first step:
Buy the cube
😂😂
Bhai ap kitne amir ho ye batao cube lelo ek chize hai shayad jo free shipping karti hai aur Indian hai matlab me definitely itna Amir nahi ki 17 dollars siraf SHIPPING ke liye de sakta hu.
Tingman Mentioned you in his latest video
Yes I saw!! Super grateful!!
Lets make a J Perm cube
**Proceeds to spam T Perms**
Ahh so this is that Krabby patty formula
Yes correct!
Hi
🐏 🐏 🐏 🐐 🐐 🐐
J Perm RS3M 2020 Pog
Ram Pog
Me no Pog
JPerm Fast
Ram Fast
RS3M 2020
Me Slow
Great Video tho! And I feel that with 1-2 drops of stardust, you will feel it might be a main contender! (Me Imaging Ram Maining a very cheap but good $9 cube: 💀💀)
Thanks for the suggestion! I’ll try throw in Stardust.
See guys this is how SCS prints their money
it is so gummy
Got cubelelo's ad on this video and it was full of cringe
7 clicks it is more than my setup i use 3 clicks
I want the sticker too
You can print it put then stick it on with some of that sticky paper idk what it's called lol.
"zor zor se bolke logo ko scheme bata de"
😶😶
No one tell J Perm about this video
Oops he’s subscribed to me so there’s a high chance he’s already seen it 😭
@@RamThakkar NOOOOO 😢