Thanks for the encouragement! We're working on it! Share the videos we've got that have helped you for us and encourage us all the more!!! Oh, and check this out -- Learn EFI with the EFI Tuners Guide: www.diyautotune.com/support/the_diy_efi_tuners_guide/ Learn HOW TO Install, Configure, and Tune Electronic Fuel Injection Systems-- FREE!
Currently having a nightmare of a time with “no controller found” and I’m getting power and I have all the firmware downloaded my usb ports aren’t cooperating
Glad to see you posting videos! Just wondering, for a MS2-gen2 a jumper on the main board had to be moved in order to load new firmware. Does this new method remove that step? If so, kudos! I don't like going inside the box any more than I absolutely HAVE to and not having to do that is a big plus. If that step is still necessary...oh well.
Yes it does eliminate that step! The only time you'd have to use the boot jumper is if you somehow had corrupt firmware, but in the real world that doesn't happen nearly ever, so you're good to go without the need to open the ECU!
Try connecting to your ECU with your new laptop and download the tune off the ECU. This will give you what's currently on your ECU. Unfortunately, if you didn't back up any of the other files they may be lost for good... Make sure to make plenty of back up files and save them in a separate location. I hope this helps and good luck with your project!
Hello so here's my deal I'm not sure what I did but now I installed the new firmware for my pimpx ms3 and got this ( I GOT A ERROR CODE( off or SEMI-sequential does not make sence on rotary or 2 stroke-use full sequential-pin already in use by-a programable on/off input) I WANT TO ERASE EVERYTHING AND START FROM SCRATCH SO HOW CAN I FACTORY RESET AND START OVER AND I GOT SOME OTHER PROBLEMS BUT I NEED TO FIGUIRE THIS ONE BFIRST SINSE IT WONT CONECT TO FIX IVE TRIED FOR 3 WEEKS TO FIX ON MY OWN) I'm out of ideas here any help is much valued thank you
Have you contacted their support? We have products for your car that we fully support of course with a tech support team that's on it when you need us! But unfortunately that's not our product.
Soo you guys can't help me since it's not your product? It's like pulling teeth trying to get ahold of some1 a Stinger performance where I got it from I'm not to computer savvy it's got Ms3 1.5.1 and Tunerstudio I paid for if not thanks for your time.
Anyone still watching these comments and can help. When connected to the MS2 unit the tunerstudio sees the MS2 but it won't connect to it if that makes sense. Says not connected when loading a sample project.
![[MV] ARTLOVEU - 어서와줘 around me (Lyrics)](http://i.ytimg.com/vi/0mifHmTmmdQ/mqdefault.jpg)
glad to have you guys uploading videos again. Love your stuff, DIYAutoTune!
Thanks Daniel-- good to see you here man! -Jerry
MORE VIDEOS PLEASE!!!!!
Thanks for the encouragement! We're working on it! Share the videos we've got that have helped you for us and encourage us all the more!!!
Oh, and check this out -- Learn EFI with the EFI Tuners Guide: www.diyautotune.com/support/the_diy_efi_tuners_guide/
Learn HOW TO Install, Configure, and Tune Electronic Fuel Injection Systems-- FREE!
Great video
Thanks!
Currently having a nightmare of a time with “no controller found” and I’m getting power and I have all the firmware downloaded my usb ports aren’t cooperating
Just happened to me
So, how long is this firmware update supposed to take? My laptop has been on the preparing for firmware screen for over an hour with now change...
Glad to see you posting videos! Just wondering, for a MS2-gen2 a jumper on the main board had to be moved in order to load new firmware. Does this new method remove that step? If so, kudos! I don't like going inside the box any more than I absolutely HAVE to and not having to do that is a big plus.
If that step is still necessary...oh well.
Yes it does eliminate that step! The only time you'd have to use the boot jumper is if you somehow had corrupt firmware, but in the real world that doesn't happen nearly ever, so you're good to go without the need to open the ECU!
you glossed over the physical connection step?
My recommended firmware upload crashed and now I can’t talk with my MSPNP2
Hi mate I need a help with a questions, I need to put my custom name on the top of Tuner Studio, do you know any way to change it?
What if your Mspnp2 isn’t connecting to the laptop really need help thank you
Did you ever find a fix for your issue. I'm currently dealing with this issue.
@@Manny1989n yeah I did actually there is a way to find the right comport
@@Manny1989n believe it should be the communication tab on the top
Sooo i lost my laptop with my tune and programs for my ae86... Got a new computer what is my next step budd?
Try connecting to your ECU with your new laptop and download the tune off the ECU. This will give you what's currently on your ECU. Unfortunately, if you didn't back up any of the other files they may be lost for good... Make sure to make plenty of back up files and save them in a separate location. I hope this helps and good luck with your project!
Hello so here's my deal I'm not sure what I did but now I installed the new firmware for my pimpx ms3 and got this
(
I GOT A ERROR CODE( off or SEMI-sequential does not make sence on rotary or 2 stroke-use full sequential-pin already in use by-a programable on/off input)
I WANT TO ERASE EVERYTHING AND START FROM SCRATCH SO HOW CAN I FACTORY RESET AND START OVER AND I GOT SOME OTHER PROBLEMS BUT I NEED TO FIGUIRE THIS ONE
BFIRST SINSE IT WONT CONECT TO FIX IVE TRIED FOR 3 WEEKS TO FIX ON MY OWN) I'm out of ideas here any help is much valued thank you
Have you contacted their support? We have products for your car that we fully support of course with a tech support team that's on it when you need us! But unfortunately that's not our product.
Soo you guys can't help me since it's not your product? It's like pulling teeth trying to get ahold of some1 a Stinger performance where I got it from I'm not to computer savvy it's got
Ms3 1.5.1 and Tunerstudio I paid for if not thanks for your time.
I think I finally just figured it out
Anyone still watching these comments and can help. When connected to the MS2 unit the tunerstudio sees the MS2 but it won't connect to it if that makes sense.
Says not connected when loading a sample project.