2 iRobot Roomba 500 and 600 Series Circle Dance 9 Beep Bumper Error Full Disassembling Part 2
Вставка
- Опубліковано 3 жов 2024
- A full video of How To Completely take apart the iRobot Roomba 500 Series and the Professional Series robots, to remove the Bumper Sensors/Cliff Sensors because of the 9 Beep Error, please subscribe, and if you have questions, please comment below.
There are 3 Parts to this Video, please see all for Full Disassembling and Assembling of the iRobot Roomba.
Part 1
• 1 iRobot Roomba 500 an...
Part 3
• 3 iRobot Roomba 500 an...
This is for the eBay listing.
Check out my eBay Store for more iRobot products for sale, thanks.
www.ebay.com/sc...
Thanks a lot man!!! We will survive as a species because of men like you! Big heart!
Thanks to you I was able to fix my roomba thank you
Thanks for taking time to make the video. I was able to completely repair my roomba with your help.
You really helped fix and fix it. Thank you very much.
Glad it helped
Thank you so much for the video. Worked perfectly. I watched the 1st video entirely, and part of this one. So much help, ty.
I guess he had already replaced them prior to making this video. Note no error when he went through diagnostics. I have a donor 500 Series I'll be using to do this repair tomorrow. GREAT video.
Great explanation. Got my roomba back up and running. Thanks a bunch.
Richard Hayes Glad my video help you out, thanks.
great video's Got my roomba working again. Easy to follow instructions Thanks
+Bruce Kujawa Awesome
Wow Excellent explanation, Good video, Thanks so much,
Worked great...good detail on video
Very professional, thanks!
Alexey Novozhilov Thanks.
Great explanation. The only thing I would add is to buy the bumper and cliff sensors together online. I just got the cliff sensors the first time and it was the bumper sensor that was bad. When I got the together it was roughly the same price and now my Roomba is chugging away in the other room. Thanks!
+Chris Barclay Yes the cliff sensors are wired in the same plug with the bumper sensors so you would need to make sure they are both included in the item you are purchasing
is there a way to disable the cliff sensors? I guess my carpet is too "tall" for the roomba. tricking the sensors with a white paper only works for a few weeks until the papers get destroyed by the bumper.
Very helpfull, thanks a lot!!
If you ever need help with Roombas let me know and I can make more videos related to your issues with them, thanks
ta da, my roomba works now. Thanks!!!
But that's all we have to do to fix the error 9 ? To remove the Bumper Sensors/Cliff Sensors and then put them back together??? Not sure if I get that...
My roomba sensors got wet and the wires broke off, is there a way I can tape any wires together so roomba will work again, or can I remove the cliff sensors completely and disable that feature, I don't need the cliff sensors. Thx
You can get another set of cliff sensors from eBay or Amazon, to replace them, but you cannot bypass them by completely removing them, there are of course several ways to remove them completely but then you would need to calculate the resistance needed for the roomba to "see" that cliff "are there", would need to get the correct resistors and solder them up, as there is voltage that is supplied to both the IR LEDs and the photocell LEDs
I purchased the two new diode’s and methodicly installed them cleaning the Roomba every step along the way. After a couple hours I pushed the start button only to find the unit is doing exactly the same thing. Goes round and round then beeps 9 times. Any other suggestions?
Hello, I need help! I did all the test that you show in this video, witch is the best one here congratulations. But my irobot don't show me the error number and it keep's spinning around itself. I don't understand why. I'd clean it all and did the test, nothing is wrong, but it keep spinning. Could you help me please???
Dear all, you can buy the IR led and IR photo transistor parts much cheaper than in the ebay link. Check out your local electronics store for these parts and you will find that the price is 50cent per one part AT MOST.
What music is playing , I want to buy it , very cool sound
I lost my bumper spring. Where can I buy a replacement?
My Roomba 560 won't turn on at all, even with a new battery. What could be wrong with it? The same thing happened to my sister's unit. Both are only a year old.
hi, make sure the tabs that are touching the battery are clean and don't have any corrosion marks on them, and also make sure you pull the tabs up a little to have a better connection for the battery to the robot, the tabs are the metal spring like things that are located in the battery compartment, you will see them when the battery is pulled out, if that doesn't help most likely the main board has failed due to moister or water damage, let me know how things go for you so I can help you out to get the Roomba back to work
Ok I think the problem is the motherboard then. My dog had an accident on the floor and the Roomba went over it. I cleaned it with a spray cleaner. Any idea where I can get a cheap motherboard? I'm in Ontario, Canada (online is fine too). If it's too expensive then I would rather just get a new unit or find a used one. Btw, great video! Best one I've come across on the Roomba.
Anyone know where I can buy the bumper and cliff sensors? Roomba says this is propriety info....
use the link in the description www.ebay.com/sch/bestdeals1011us/m.html?_nkw=&_armrs=1&_from=&_ipg=&_trksid=p3686
I removed my bumper sensors but where can I buy the parts that are needed? Anyone have parts numbers and online place to buy? Thx
have you tried roomba direct?