How to use a Sawzall | Tricks and Hidden Dangers
Вставка
- Опубліковано 24 лис 2024
- Learn pro tips on using one of the most widely available power tools in the world... the reciprocating saw (A.K.A. The Sawzall). This tool is amazing for a wide variety of demolition tasks, but can also be tamed and used to make finer cuts and can even be used to make a plunge cut! Also learn some cool history and how the Sawzall got its name. This video is great for anyone getting into the Constuction trades, or anyone to be able to tackle some bigger tasks around the house.
Check out our online store!
You'll get cool merch and our kids will get to eat.
teespring.com/...
#ad: As an Amazon Associate I earn from qualifying purchases.
Occidental Leather 5055 Stronghold Suspension System: amzn.to/2kWUUt6
Occidental Leather 5035 LG H.D. 3in Ranger Work Belt: amzn.to/2mbPcnc
Occidental Leather 8089 M OxyLights 7 Bag Framer Set: amzn.to/2m9ydC8
Occidental Leather 5089 M Seven Bag Framer: amzn.to/2mgqx0E
Occidental Leather 5520 5 in 1 Tool Holder: amzn.to/2l6ey5N
Occidental Leather 8580 LG FatLip Tool Bag Set: amzn.to/2kC1kNR
Occidental Leather 9515 Adjust-to-Fit OxyLight Framer: amzn.to/2mfnwxE
Occidental Leather 1546 Stronghold Lights: amzn.to/2ma8HN0
#building
#better
#shopclass
Hey man, I know this is just an old video to you, that you made years ago and have since moved on from. But I hope you read this and understand that this video is continuing to help people, likely every day, all over the world. So thank you.
Today it saved me some embarrassment when an older guy at church offered to pay me for helping him with his seasonal yard work. He sat his expensive sawzall in the grass, and said it would help me in disassembling this old wooden solar heating contraption he'd just removed from his roof. He wanted me to save the hose, but tear apart and burn the rest. Fortunately, I found the 10 minutes to get on UA-cam and watch your video while he ran to the hardware store 😂
One of the best instructional videos on how to use a reciprocating saw.
I do a lot of deck work with my sons, and we use reciprocating saws a lot. One important thing to remember -- remove the battery when it is not being used or when it is being transported. I constantly remind my sons to be extremely careful with the saws.
Just use a corded saw. One of the few tools I prefer without a battery bc you never have to worry about it dying no matter the size of the job. Saves a lot of time from having to charge batteries not to mention the cost of buying and replacing batteries. Saves on that too
Hahaha. We have the same name. 😃
@@Californians_go_home You have a GREAT name!
@@staytru5563 I'd heard Tim Carter (Ask a Builder) say to run and buy all corded now, as the battery stuff doesn't last as well/long.
The older stuff is much heavier, not appropriate for many things, and women/smaller people won't like that.
@@staytru5563I bought a one handed reciprocating saw with a pruning blade. Works great for dealing with tree limbs before getting the chainsaw to cut up the trunk.
Hey folks, DIY guy in progress here with a big THANK YOU. I had to remove a section of rotten decking this weekend and your plunge cut technique saved me SO MUCH time and effort. I had to come back and thank you for sharing that with us.
I am a wimpy lady who doesn’t like to use cutting power tools much and I even used one! Made some sweet raised garden beds out of pallets-thanks in part to your videos. Great tips on how to use the smart way.
Every chick needs her own tools. I just got a nice Ryobi set of drill/Sawzall and light for 100 bucks, plus the battery, charger n a bag.
Dewalt wanted 100 JUST for the tool and battery. I didn't see any mention of case or bag, either.
You also need to buy bits/blades. I got one saw blade but I suspect it was a return/open box, thus the price.
If I were using it daily, I might have bought Dewalt. They're under lock n key, and Ryobi wasn't, tho. Maybe nobody wants to steal them. Which is ok by me. :)
NEVER, EVER buy cheap junk from Aldi. I watched a guy do a nasty number on his hand w their drill bits when it broke.
They have nice many bit screw/ratchet sets, tho.
You'd need: screwdriver set (mine is Dewalt, only downside is the bits might pop out of handle when changing them out) and several screwdrivers.
You can't/should NOT really crank on the bit sets. They're for lighter stuff.
Same w wrenches. Only get Craftsman and then spray paint every centimeter bright pink so nobody steals them. I'd etch that shite, too. That's where Dremel might come in.
Good lights. Again Maglite. The one just bigger than pen size. Very bright. Maybe 15 bucks. Takes AA.
The cheap headlamps for 10 bucks w 2 flashlights at Menard's isn't a bad deal, either.
Good hammer. Axe for things like camping or intruders. I'd think again if some broad came at me with an AXE. lol
.
Army Navy store also has good stuff: big mosquito netting for the yard. Tiny solid gas stove and wax like gas thing for 5.00. Good if something happens to the power, your modern stove won't work (electronic ignition).
Heavy, heavy camping stuff for loss of heat/boiler. At least a bag.
And a water purifying system that's portable and doesn't need electricity.
Costco has good size clear bins to store food/water and such from mildew/mold and pests. You don't want too big, b/c it'll be heavy.
You need a gallon a day per person, plus pets. Need at least 3 days. You never know. Snow states, you could get stuck in snow or stranded in the house for at least 3 days.
I'd get a list of recommendations from your neighbors on handyman and licensed tradespeople (plumbers/carpenters, electricians). Don't trust that anyone in the book are licensed.
The person who knows their stuff and talks a lot and shows you things is your person. Can't let them wander around the property on their own. You don't want to know the shite I've seen them do.
Used a ladder to get on the roof from the 3rd floor landing. Yeah. 👏 👏 👏 brilliant. Extremely stupid and dangerous. I saw nobody roped off, either. You might see them tied to the brick chimney, which isn't set up for lateral forces (sideways) AT ALL.
It gets worse from there. Just saying. Especially if you're female/older. You're expected to be stupid.
You ain't a wimp. You got it done.
Great content, I don’t think you understand how much this helped me lol. Just started my plumbing apprenticeship last week, and I embarrassed the hell out of my self using this tool the first time I was asked to. Keep up the great vids man👍🏾
How is that going? My friend is a plumber. :) he's happy. I got the friend n family rate in our nightmare house, so I'm happy...
This video was the only preparation I had for cutting up several pine limbs and I’m not commenting from the emergency room, so thank you. Just for people who have never used an electric saw before, I had to press on the top of the Sawzall the whole time it was running to keep it from jumping up, and it generates quite a vibration.
You guys are amazing! I have a basic working knowledge of power tools that I learned from my Dad. But these tips and tricks are awesome. I believe even he would be impressed! Keep them coming and thanks again.
Mrs. R here: I want to learn how to use hand tools. This video was my first and I immediately subscribed to your channel. Your video was very friendly, helpful, and not condescending. Thank you SO MUCH, as I am now the "man of the house", I need to be able to do useful things.
Much gratitude
They are handy that's for sure, used them for demolition work, use them for cutting old exhaust systems out of trucks, with the Milwaukee torch blades I've cut 3/4 inch thick steel with them.
Ty so much for these helpful hints. Single mom here having a hard time getting handy persons to show up. I never used a saw all before and was nervous about it. Now I feel better about my piddly rotten board replacement.
If you use a shorter blade "backwards" you'll rarely have a problem plunge cutting. You can use Saf-T-Kut blades in drywall without cutting wires or pipes. They have all sorts of special blades now: Surform files, diamond rasps, scrapers, scrub pads, etc. I love how he said use the baseplate them free cut at the tip. Never mentioned most saws now have an adjustable foot that can extend out to support the end of a blade then progress down as the teeth wear out. Always use both hands. REALLY loud cutting metal but works. Advanced users can carve with it. Sawzalls are responsible for more sagging floors because plumbers butcher the joists to get 'stuff' to run downhill.
I’ve used mine one handed, but I was cutting below my level, not overhead. I was cutting a tree root and was kneeling half way in a hole in the ground. I had to stabilize myself with one hand while cutting with the other. Not ideal, but I was able to perform the cut without being at risk of falling or getting cut.
totallyfrozen ...Yeah! Saws-all makes stump removal much easier and faster. With a long blade it’ll cut around small rocks and who cares if it breaks a tooth or two?!
@@unclefuddelmer9224 Oh, man, I wouldn't play with anything involving trees. I've seen the accidents. They're so nasty, they use cartoons to show you.
thanks so much
I just got into carpentry and I need this type of videos to teach myself
Beginner here. I had to watch four videos before anyone explained how and why to use the shoe. Thanks.
Tip: use a shorter blade unless you really need the length
This helped me to understand the basics of this tool and yet I can’t help but notice the last comment, be cautious and yet you were not wearing eye protection when using.
Great tips! Especially being careful with the sawsall on ladders and the plunge cut!
I had 2 other brands in the same price range and the batteries wouldn't last more than a couple of uses. I got the Black and Decker ua-cam.com/users/postUgkx84IcU5pbZd1Qrz8u4-YRLmJax7kdRi7B because I have a bunch of their other battery powered tools that are great and it was not a disappointment. I've used it for over an hour straight doing some demolition and the battery was still working great when I finished. It's also smaller than the others I used which makes it easier to use for longer periods and the performance was as good as my corded saw.
Great tutorial for using the reciprocating saw, thanks for putting this video together!
Great video; I'm a late bloomer with tools and projects. Very helpful; hell of a tool I need to add!
HD has a deal: drill, Sawzall, light, battery/charger and case for 100.00. Dewalt wanted 100 just for the drill.
KIM, drill bits aren't included. Blades might not be, either.
I think my Ryobi set was open box, but at 100 bucks, I won't complain. Dewalt wanted 100 just for the best rated drill.
Love the channel guys! Your short to the point format with quick clips of use and examples in between with the odd bit of humour in there is so much better than others on UA-cam who just want to hear themselves talk and do no real work.
🙌🏻
Using a Sawzall for over 20 years now never really tried to do a plunge cut great great video
Nice video. Here’s another tip: don’t run the sawzall relentlessly for 40 -50 minutes on end. Then go for another another 20 minutes. Once the tool gets warm give it a rest. You will burn out the motor -guaranteed. Don’t ask me how I know? Also take an air compressor and blowout the vents to keep the brushes clean. If your starting out you can get a smaller battery operated sawzall or a hackzall. They produce less power and fit in smaller places. HF sells pruning blades. Tip - the battery operated sub compact are good for limbing trees if your climbing and don’t want to use a chainsaw. You can drop the tool if it bucks (binds) and it’s safer. To cut a circle start with a pilot hole 3-4 are good inside the arc you can cut some relief cuts. Take the narrow tip of the blade and cut the arc. Then move to the next pilot and cut the arc.... good for openings for toilets 🚽 etc. change out the blades when they get dull it won’t rip apart the tool. Also purchase several different types of blades and length, depending on the job and material. The front guard is adjustable so if you want less blade showing moving it forward. Don’t cut the power cord on the first day. Milwaukee has the original patent on the tool. Some of the newer tools ($$) have an orbital switch which bites into the wood. Some have various speed settings and the trigger might also be speed sensitive? Wear eye protection or at the very least glasses when operating power tools. Ear protection is also good. You don’t want to get tinnitus when you get old....
good tips thx
Nice video. My sawzall experience limited to cutting down bamboo and pruning. Rely on circular/jig saw for the wood work. Your tips, especially with the upside down blade and plunge cut guidance, I can be more versatile with this tool. thanks
What about the dry wall cut. When you need to cut a line only a half inch deep so to not hit electrical. Drag the saw along the wall at an angle if that makes sense. My personal favorite;)
In my house, my licensed electrician cousin put plumbing right next to his new electric. Get that one. Brilliant 👏 👏
When it leaks (eventually it will...) now you have water all over the conduit.
Thank you so much for this very helpful lesson. I am amused that I have been using my sawzall incorrectly for decades. This is very helpful.
10 years without a plunge ....interesting. I enjoy the honesty so rare these days.
And I like the look of your shop ~ we all know what a shop looks like. Today people film in a Prop ~ Not a Mans Shop
It was about 10 years into using Sawzalls for me that I learned the plunge cut also. The first time I saw it done, it blew my mind. The SA is one of my favorite tools.
Watched the FNG squat down to cut a board that was going to bind 💯, figured it’d be a good learning moment as he wouldn’t listen to any coaching. Once he was writhing on the ground holding his balls that his elbow just obliterated, we’re laughing and our foreman hollers “be careful, that cut will probably bind up!!!”
I'd be there w the camera, just me...?
Just learned how to do a "plunge cut" today. I can now thank the guy who taught me this neat trick using the correct terminology.
What a great channel. These are the type of guys I could work for.
Keep a metal cutting blade ( not a combo blade - narrow kerf and tiny little teeth for cutting metal like hacksaw blades), handy. It's a great way to cut apart a mistake without damage to the lumber. Spread the two members only slightly - then the narrow blade can cut the nails real easily.
I always keep my blades in backwards. As far as I am concerned; that is the difference between a real pro and a duffer.
Great job gents! If the saw has an adjustable depth shoe, it can be adjusted to allow cutting on more of the overall blade rather than just the stroke length nearest to the saw. We were cheap and would make every blade last until the teeth were literally ground off. Also, GREAT comment about thinking about what's behind the surface you will be cutting. I was plugged into an outlet near where I was cutting into a wall. During a cut, there was sawdust, plaster dust, noise, chaos.....then what seemed like a camera flash....and silence.
Me being cocky yelled BREAKER!!!!
uh...actually I had just cut through the electrical wire in the wall and it shorted on my blade. I was the daily dumbazz that day.
Thanks for this video....the sawzall was always considered either the demo tool or the whoops tool.
At least you lived to tell the tale!
I have a licensed electrician cousin. Guess where he lands the conduit? Right NEXT TO the plumbing...
Yay me! This is the first time I've watched one of your videos and knew all the advice already. I usually get at least one piece of practical advice out of them. Keep up the good work guys; love your videos.
Fantastic . All the info I was looking for . Never used one before but have an upcoming project and the tip about turning the tool/bald to make flush cuts was the info I was looking for . Thank you , really great video
Good stuff! Bought one last night and am about to take it on its maiden run.
Best video ever! My 😮 moment was at 4:13. I thought I had to drill a hole first. This was fantastic! Thanks 😊
Be safe y’all! This is an amazing tool but it can cut you bad!! Another tip would be - ANYTIME you are touching the blade to change it out or install the blade - PLEASE remove the power source.
Love the flashes to the demo when the toilet was at improper clearance. Love this channel!
My folks got me one for Christmas. Appreciate the video. Thanks for posting.
Love a Milwaukee sawzall I still remember the first time I used one i was about 10 years old my arms shook for a week 😂
Lol me2 also from tx
Milwaukee tools are great!
😂
Thx for showing the Plunge cut. Great video! 👍😊
I thought I would end up getting a grinder to cut my 90cm high corrugated metal raised garden bed into half. Thank you very much for sharing. I was able to do so by plunge technique you showed.
This video was exactly what I needed. Thank you!
Great, simple presentation! Thank you.
Just last week had to cut rafters on a hip roof with a different pitch on each side of the hip rafter. The resulting angle was 63 degrees through a 2x6. My first thought was hand saw. Second thought: Sawzall! Marked the angle both ways and 30 seconds later it was done and fit perfectly, stayed true all the way through. Tightest fit on the whole job!
Great demonstrations and tips - thank you so much for sharing your expertise with us!
You are a great man Eric (and the rest of the team are just as good)! Thank you for the work you are doing. Great tips and a pleasure to watch. Stay safe and keep on the good stuff.
Fantastic video! Love the old Milwaukee 😊 I have almost dislocated a wrist once or twice while cutting lumber that had weight on it 😩😩😩
Excellent video brother!
Hi. Greetings from Venezuela....
Thanks for sharing your valuable information and advice with the world...
I love all kind of tools... Unfortunately, They are very expensive here...
I love that technique where you opened a slot with the Tip of the blade to penetrate the Wood piece more easily without getting bounced off 👍
My first vid on the way to carpentry. I LOVE safety tips. Thank you. Subbed.
Some of the most practical and useful advice I've seen in online content regarding this particularly fun/dangerous (read: AWESOME!) tool.
Great video. Safety first always with such a versatile tool. Many thanks.
thanks for the plunge cut tutorial, that will come in handy! i have a corded sawzall and a cordless hackzall. i use the hackzall with a pruning blade to trim branches and cut small trees.
Loved the tips and trick part of this video.
I'm not sure if it has been said on here already, but there was a model even older than the one you have. It was all aluminum, no red. My grandfather had one, and it was a beast. Funny thing is, he gave me one of his older Milwaukee hand saws, and I still have it somewhere in my shed.
This was amazing!!! I'm the kluztiest handy person you will ever meet so as a 38 year old woman my dad has cut all my things for 20 years. Tomorrow, the rest of that rotten subfloor is mine.
thank you. i needed this tutorial today. good instructions. major help.
This is beautiful! That plunge cut 😍
Short and to the point. Great video.
Great job. Thank for helping the less inexperience. May save someone from an accident. 👍👍👍
Very helpful for a new user. Thank you.
This is the only tool that intimidates me. As an apprentice, while using sawzall the blade bound up, pulled me off the ladder and i went off.... trigger still engaged and i tried catching myself and tool while it was still cutting. 😮 Almost cut my hand.
I just purchased one and need to get over this fear😅😅😅😅.
The saw in vice.
I got hung up on a nail and the body pushed back when i was in a tight spot. Ended up with 4 stitches on the back of the thumb when it got jammed into the subfloor edge.
The plunge cut tip was exactly what I needed for a project, and that's not even why I clicked the video.
Thank you for these useful and important tips. They could save someone from a serious injury. I don't like the idea of using them on a ladder at all. I had a friend a few year ago doing some trimming on a ladder and fell, broke his neck and died on the spot.
What I told my kids. #1 rule using a Sawzall, Get the blade for the work your doing. No sense in using a 12" blade for what a 4" will do. You have more control that way. And for gods sake keep your arm kinda loose, so that when it kicks back on you it doesn't hurt you.
Rule #1 should have been *always* wear your safety glasses on your face, not on your cap.
My very experienced electrician uses a sawzall blade on a wooden handle, and it makes a very aggressive and effective drywall saw.
Yeah, it does. I've seen it. Lol
Hello Perkins Brothers, first time being first to comment. Not in the trades, but I thank you for posting them. I always pick up some bit of knowledge.
When doing a plunge cut it helps to use the shortest blade that you have.
Use the shortest blade that will get the job done - period. Scares me when people walk around with a 15 amp saw and the longest machete looking blade.
Is it because it wobles at the end less?
Awesome. Thank you
When cutting nails between two boards drive a wedge in to make room for your blade. I use plastic chainsaw felling wedges.
Use narrow kerf hacksaw type metal blades. Then you barely need to wedge them apart.
Great tips. The sawzall in the video looks like a model 6511 from 70s-80s. The first (all metal) one is model 6500 (aka the 414).
The plunge cut...Thanks for that
This was super helpful, you guys are great!
Intersting. Well instructed. Thank you.
You can take the blade out, press the foot up against your form, and run it like a concrete vibrator. Obviously this is only for small stuff.
🤫
Don’t tell my wife
@@totallyfrozen She already knows.
Can it be used to cut down telephone poles and / or utility poles?
I wore out several Milwaukee sawzalls. I now have the Bosch reciprocating saw and I really like the blade lock. Far stronger and easier to use then the Milwaukee.
*than
A sawzall is extremely aggressive. Had to buy an oscillating tool to do smaller tasks. I like cutting screws and bolts out that are stripped completely. Also, I like to use it in a pinch if my chainsaw gets wedged between a tree. I used it to take the chainsaw out
Don't they make a drill attachment to drill it from inside the screw/bilt head and remove?
That was a great video! Thank you!
I use a 6inch hole saw for can lights in pine or cedar ceilings...way cleaner and easier
Very interesting and very nice video. Many thanks.
wow thank you for this video - I learned a lot ;)
Video saved me from looking like a dumbass and saving my shoulders from looking like they are on a roller coaster. Big W thank you for this video.
I've worked a lot with a 60+ year old man that has done construction, remodeling, and smoke/fire/water damage restoration since the age of 14. He will NOT operate a recip saw unless the blade is upside down. Always works the trigger with his pinky.
One more tip keep your guide hand on top of the saw, not the bottom. It's a saw not a machine gun. Not fun when that sucker kicks back(aka your vice demo). Can definitely walk right over that guide hand fast, giving you a good cut or even a few stabs.
Yup. Running the 15A Super Sawzall today cutting a stud out at the top plate at high RPM and she bucked out of my hands, got airborne and 180° in about .25 seconds or less and stabbed me in the chest 2” above my heart. Didn’t start bleeding until 2 hours later, I think the seatbelt chafing it got things going and it bled thru my tshirt and flannel. I checked it after the impact and I had holes in all my layers but no blood. I guess that’s a puncture wound for ya. Anyway be safe everyone.
What brand of blades do you prefer to use? I am in love the diablo blades
Nothing but diablo, first step with any other blade is throw it out and get a diablo 😁
Oh the woodpecker action, love it when that happens
Woodpecker! Haha.. that’s some great terminology
Thanks guys for the great info.keep um coming!!
Awesome tips, love your videos, I’m learning more each day!!!
By the way great video I would also stay away from the cheaper saws spend the money for the 15 amp saw and skip the 12 amp models you won’t be sorry
Lmao the plunge cut is something I learned 1st day on the job! I didnt know I could do that and my journeyman just said hey do this and ever since it's all I do really. We cut out everything with sawzalls. Floor heats, stacks, exit vents. Ect.
You can’t beat the new carbide tipped blades
Agreed
I thought you were gonna be showing the Diablo carbide blades ripping ass through steel…🤣 But great video, I’ve never seen the plunge cut. I’ll definitely put that to good use. Thanks for the video.
Thank you! This helped me big time.
REALLY HELPFUL VIDEO THUMBS UP
Dont want to troll you. You guys have great material. Safety 1st , safety glasses.
The cordless Milwaukee Sawzall will stop moving if/when the blade gets pinched. That's one great safety measure that a corded saw doesn't have.