03 Sharpening and the Burr.. Scary Sharp starts here!
Вставка
- Опубліковано 18 вер 2024
- Part 03 Sharpening and the Burr.. Scary Sharp starts here!
- Failure at this step results in a good looking knife that is dull as a spoon...
Burr Basics:
- How to detect the burr
- Burr across the entire edge
- Bur removal techniques
Next up: Part 04 Polishing and refining the Burr...
Scary Sharp Continues...
Recommended Products:
TSPROF Blitz 360 or the Blitz Pro
Edge Pro Diamond Matrix stones
www.StatesLLC.com (Lapping Film)
Gritomatic.com Sharpening products
Thanks for watching!
Please Like, Share and Subscribe.
: )
Very good series, appreciate your sharing this.
I've picked up some valuable information, thanks...
Thank you! I love the way you take your time doing what you got to do. Sharpenings a love that takes perfection I guess and you got it
I started out w/ the KME, then added the W. S. Ken Onion rig.
Now, I'm learning the KO-3.
Those Diamond Matrix stones seem like a very good investment...
Same sharpening path I took...
The Diamond Matrix stones are terrific 👍
Thanks again for watching ☺️
Do u also use a magnifying glass as well? To make sure you got from the top to the bottom of the apex
I use a flashlight to see the burr.
Occasionally a magnifying 🔍
And my finger nail
More videos on the topic coming shortly.
I need to edit the footage.
Thank you very much for watching!
10 minutes to get a burr? Exactly why I no longer use Edge pro stones. Too soft, too slow. The Venev is so much faster. ;
If you still have the edgepro stones and are not using them let me know.
Perhaps you would sell them to me.
The 80 grit edgepro is too soft. (I use the 80 grit Venev)
It may also take longer if you use a high grit stone (250)
In the video a 250 grit stone was used..
This takes longer. Thank you for watching!
If you like and subscribe it would greatly help my channel.
Thanks again.