Fall Ride Chasing the TRX450R!
Вставка
- Опубліковано 16 лис 2019
- We had a perfect day for a late season ride at Appleton OHV Park. It was awesome to rip with Chad and to have my first real experience with my Precision Elite Steering Damper! I slowly gained more confidence as the day went on and it felt great to have some solid seat time since my shoulder injury.
My New Website! www.petehager.com/
2019 Yamaha Raptor 700 Special Edition-
Precision Elite Steering Stabilizer petehager.com/products/precis...
HMF Full Exhaust System
Power Commander 5
Pro Taper Contour Bars www.rockymountainatvmc.com/pa...
Pro Taper Universal Bar Mount Kit www.rockymountainatvmc.com/pa...
ESI Extra Chunky grips amzn.to/2S94WWm
Pro Armor Bully front bumper
Pro Armor Nerf Bars
Alba Racing rear grab bar amzn.to/2FLPgmp
Alba Racing gas cap amzn.to/2FYuz5Y
Upp Racing case saver
Quadboss wheel spacers
GYTR A-Arm skid plates bit.ly/2BacjTM
Warning Plate Delete
1st Person Filmed with the GoPro Hero 7 amzn.to/2MHvxVl
MotoVlog Mic: Purple Panda (10% OFF) www.purplepandastore.com//PHa...
**Must purchase GoPro adapter to run microphone amzn.to/2SjdM3O
3rd Person Filmed with Sony A6000 amzn.to/2XoVfWD
3rd Person Mic-Sony Zoom Microphone amzn.to/2Xtv6Wp
3rd Person Wind Muff- amzn.to/2x5Lluf
Drone Footage with DJI Spark amzn.to/2G9z1ig
My Ramps amzn.to/2KUMJYo
Intro Music-"From Exile" by Sum It
Links in the description are typically affiliate links. If you click on one and purchase, we’ll receive a small commission. This helps support our channel and allows us to continue making videos like this one! As always thank you very much for your support!
Follow Me On:
Instagram- / pete.hager
Facebook- / pete-hager-media-21519...
#savesportquads - Розваги
It’s really cool seeing someone ride where I ride and seeing the same exact things that I see when I ride
Appleton is a fun place! You should meet us for a ride sometime!
Thats 1 day and 4 hours away from were i live
Henry Friesen it’s only 1 or 2 hours away from me
@@eliperry2366 if i was that close then i would be there almost every day were im from there arent really any trails
Thomas McCabe Minnesota
As usual thanx for another great video. & even more so thanks for always giving attention to your fans in the comments here, by answering our questions etc.... as your channel is growing, we hope you’ll still be able to continue doing so lol!
Thanks for the positivity! I enjoy all the comments and feedback from people, It's definitely motivates me to keep making these videos!
Love watching you ride with this guy
Welcome Back !
Great looking riding area...Raptor Reliability 😉
Great ride boys,flat out style 💨💨
Love the new merch Pete 👌
That dasa exhaust sounds awesome on that TRX!
Perfect 👌
Next step are the beadlocks with low pressure, you can ride all day and keep your arms intact 💪
Great to see ya back on the beast Pete! 👍
This vid was the next best thing to riding w u guys. Excellent footage. Thanks ! I like the shirts, good pic of quad on back. A lot of times u cant tell its even a quad cause the angle of the picture or there tryin to make it look like its jumping in the air and it just looks like a dirtbike or just a blob.
Awesome video! I have a trx450r just like that so it's cool to see this! Keep it up!
I love when y’all ride together
Another great video for me to enjoy!!! Keep up the great vids as always👊🏻
Looks like some very good riding. You got some pretty good action shots.
I have watched a lot of your videos bro and this trail definitely in my top 3 that you have been to looks awesome
Another slammin vid Pete!!! Also the merch is looking good!!!
Another excellent video, love the new intro!
We are lucky to have some one like you
I been waiting on u chad to make another video together super awesome man and the new intro is 🔥🔥🔥 oh yea imma check ur website out also 🤟🏾
I love your videos! Keep up the great work 💪🏽
Love the new into 🔥🔥
Looks like a great place to ripp, excellent video 👍👍
Nice shots Pete. I’ll be riding with ya soon !
Love that drone shot man
Every time I watch one of your vids I just get the same thought in my head lol “why don’t I have trails like this near me” lol
Where do you ride?
watching again this morn, the trx looks nicer with the 20s on and the raptor is a monster!!
Thanks Lee!
Great vid pete! Definitely a fun place to ride, when you don't have a sick kiddo,lol
love the drone camera work.
God I love the look of that generation Honda.
This is freaking awesome . i feel like im driving .
presicion steering stab eas such a game changer for me. I instantly became a very good rider! lol
New intro is sick!
Use to do this with my best bud from 2001 to 2003. RIP when he died in 2008.
Those look like some good beginners trails for me
Love that TRX. I have a Raptor but I like those Hondas.
Diggin the new intro 👌
I had a black 450 like that one bored over to 97mm with a stage two cam 12.1 Wiseco piston and hmf exhaust with a carb off my other 2007 450. The radiator fan was seized up when I bought it and it had also been sprayed to death with nitrous. Rebuilt myself never fixed the fan and rode that baby hard with a higher revving rev box and all. I love my raptor and my trx700 but that 450 will always have a place in my heart along with the 07 450 (electric start).
Sounds like a beast of a quad! I too enjoy my Raptor but those 450's handle on rails and are a blast to ride. I cant wait to get one!
Pete Hager yeah I love the quick revving light and nimble trx450’s. The only prob I ever had outta mine was I tore 5th gear out of my 07 and had to redo the tranny myself ended up snapping one of the shifting forks. Where I’m from we do a lot of wide open/highway riding. We ride trails too but not as much. I’ve had so many bikes growing up and my favorite has to be a 660 my lil bro adopted.It was an insane monster on top side. I built it with a 11.1 wiseco piston, stage two cam, and hmf full exhaust right in my back yard under a shade tree and straight raped my cousins raptor with a 5 or 4 mil crank (can’t remember), 12.1 piston, monster duals, and a stage three cam that was professionally built. My next bike will be a banshee simply because it’s the only bike I’ve never owned. My lil bro just bought a 2020 raptor and I’m already itching to crack the seal on that baby as well. Stay safe bro and ALWAYS keep that helmet I made that mistake back in 2014 and suffered permanent brain damage. It’s not worth it.
nice rippin, that 450 is nasty!
from UK , this will be dream trail .
I like the new Intro!
Hell yeah man. Awesome video as always. Wish I could have made it out for this one. One of these weeks I'll make it.
Definitely need to do that! We'll connect next season for sure! 👍
Looove it! Like the new intro too! I can imagine with all the work he has done that his bike is super fast! But you sho nuff making that Raptor keep up! Lol Glad to see you're back in full effect doing what you love! 💯💯💪💪
Its been nice to have some fresh content! It's gonna be a long winter but hopefully I can keep creating the whole time!
@@PeteHager cool beans!! I'm definitely locked in waiting for whatever comes next! 💯
Terrell Spivey I filmed myself cleaning my quad so I think that will be next 😅
@@PeteHager lol! Hey! cleaning them jokers ain't no joke! Lol trust and believe me when I say I totally understand and feel the same way about dodging as much mud as possible! Lol forget what others say! Lol and shoot it's far more important for you because first off you got a beautiful bike that I know you want looking good when featured in a video lol and on top of that you're a UA-camr who tries to take care of your expensive equipment! So yeah! Proceed on with that cleaning video! Lol
Can you please ride more often I like watching you ride I have a 700 raptor 2012 with 18 inch spacers and racing shocks
Love the content man
Wish I had the stuff to ride up there .I'd have come up.
You make some of the best atv videos on UA-cam
Thanks man! Hope that new Raptor is still running strong 👍
@@PeteHager you know it bro I'm going to get up with you this summer about meeting up at a ride,
I hope to plan some ride meet ups at some bigger ride parks next season! I definitely want to do more travel!
Love the net intro🔥🔥
Sick vid I'm hooked
I’m glad you liked it! Thanks for watching 😊
Keep up the good work
Pete what bars did he use to get clearance for the crossbar above the dash?
Hey Pete, I don't know if you're going to see this but I have a question for you I'm actually searching for a set of handlebars for my 450R. I'm trying to get a set where I can utilize the stock dash and also have a crossbar with a crossbar pad on them. I noticed that the guy with this 450R has the exact setup that I need. Is there anyway you can figure out what bars they are and what rise?
Sweet ride man! Just ordered a used precision stabilizer for my ltr 450 for a third of the price cant wait to try it out!
The rep told me if you fully harden the stabilizer then try to move the bars you should barely be able to turn them. If you try that after installing and it doesnt seem to have much resistance than it may be time for a rebuild. Thats after a couple hundred hours of use though so hopefully yours is gonna be good for awhile yet 👍Your gonna love how it changes your experience!
@@PeteHager thanks for the info I did not know that will be making sure to check that 👍
Cant wait for summer pete me and the boys coming to brapp
Sounds awesome man!
cool vid pete
my trx450r dies out when i go to idle i have to constantly hold the accelerator down so that it stays on someone help
Very cool trail
I’m looking at getting this exact Trx with Elka and yoshi and more
Like the new intro
i have an 05 trx 450r same set up other than stage 2 hotcams and standard bore..full rossier enginering port polish and 6 sigma jetkit.
stage 3 is really hard to fully utilize on most trail or track race situation... its best for top speed runs but still nice quad...
Great video 👍
Lovin the vids
Just curious for future reference where do you post when your doing rides with fans I definitely would have been there
I had posted on instagram and facebook prior to that ride. It's late season so lots of people have switched gears. I'll be announcing future trips and rides as things get planned next season!
That was awesome, God bless
Where is that place located at it just like it's so much fun to ride
I have a modded trx 450r and it's stupid fast when everything is good, but If I could do it all over again, I would have a 700 Raptor with stage one mods and done. Awesome dune and trail mix quad.
Thats why I got the Raptor first. Now I want to get a 450 and then have this as a back up!
That 450 freakin barks man wholly. I’m a two stroke guy but even I can admit that thing is awesome. But seriously Bro you gotta get rid of that craptor and get a ProTrax frame and outfit it with power valved 330 ESR.... I promise you won’t be sorry.
Thanks for the video! Hope to see more ATV motocross videos on UA-cam. What do you think of the can am renegade?
I think the Renegade is super capable. They're pretty powerful and I like how smooth they ride. They're very plus. If I were to have a sport utility I would pick it over the Scrambler!
Does anyone else think the TRX is idling way to high? Idk, but anyways, wonderful video Pete like always. All I got to say is keep it up!!!!
My Honda was idling a little high that day, when I got home that nite my air filter was really plugged up so i cleaned it and that took care of the high idle problem. Sometimes it's the little things you miss that cause problems. At least it was an easy fix
anyone know anything about elka shocks i have a 2004 kfx700 with full elka suspension front and rear shocks. I bought the quad and the front end sags a little and i bottom out sometimes and the rear is really stiff anyone have any suggestions on how to change that
Wish I could help you there, I'm a noob when it comes to adjusting the shocks, I hope to learn more about them and do that upgrade eventually
Hey man you should come down to Florida if you like trail riding
I like your vids 👍
Nice new intro
I'd like to see my 450R against Chad's. I have a stage 2 cam a 520cc big bore kit, and port and polished head. Exhaust is white bros with KN filter. I don't have the valves like his though. I'd be interested to see what difference that makes.
If you come to WV and ride the Hatfield and McCoy trail let us know.
Saludos broo!!!!
This video makes me want to fix my yfz450 so bad
how many cc is ur raptor
Where is that track at
Darn it! I missed you again at Appleton. Maybe next time, hit me up the next time you come up.
Do I have your contact info? I sent messages to all my MN contacts before that ride!
@@PeteHager you can find me on facebook or you can DM me on facebook messenger.
Can’t wait for the yfz video
I haven't even looked at that video yet! it will be fun to put together 🤘
You should paint the frame of your motorcycle and the black wheels would look good👌
That’s some nice merch I need to get the hat and shirt
Thanks man!
Man, your field of view give a great sense of speed. Are you using a go pro, and what settings are you using? I would love this for my street bike stuff.
Thanks man! I've been running gopro hero7's for all my recent videos. The first 5 minutes of this video shares the set up I'm using 😊 ua-cam.com/video/kWbckb-7TQM/v-deo.html
Awesome 😇😇😇
Good stuff! Thanks for the sub
Is this setup on TRX450 less powerful than before (with 520cc) ?
My first motor was a dasa 500 cc big bore, this one is a CT 520 cc big bore with a different bottom end. This one (520) has about 4 hp more. I never got a torque number on my first motor.
Do you still talk to the dude with the blue raptor 700 the one that did the ditch jumping?
We stay in touch but he lives in Utah now. Hopefully we can make some content again someday!
You considering any motor work in the future, Pete? Cams, porting, compression?
I have a 4 year extended warranty so i'm not able to do any extensive modifications like that. If I get a 2nd machine I could potentially have work done
Pete what kind of bars, stem & clamp do you use? I feel like I need something taller for my Raptor, but not sure which way to go.
I have the Pro Taper Contour in the "ATV Mid" size. I also have protaper clamps for the oversized bars. I have them linked in my video description. I actually wanted to lower my handlebar height so they're about half the height of the factory Raptor bend. If you want taller bars most people would put an extended steering stem on. I've never looked into bar risers..
Oh right on thanks !
I’d love to go to a place like dat and ride
U should make a tour of all your atvs
I only have my Raptor 700 actually! I hope to have a 450 soon!
Hey Pete ! What are you running for mods , I just got a carryover 17 se and looking to hop it up in the spring , so far going monster single exhaust , fci intake and programmer
I have my mod list in my video descriptions. I still have the factory intake. You must have gotten a killer deal on that '17!
Pete Hager I sure did !
Where did you buy the precision bar pad
They sent it with my Stabilizer. I'm sure if you reached out to one they would ship one individually.
Nice video!
Btw how much the stabilizer helps you with arm pump and thumb throttle pump?
Greetings from Chile
The stabilizer helps a lot with arm pump! You can ride much more relaxed. I never have any thumb throttle issues so I haven't noticed anything with that. Precision also makes "anti-vibe" handlebar clamps that will help with arm pump as well!
@@PeteHager tyvm for answering me man. Greetings from Chile. Have a nice day
@@PeteHager Hi Pete, if you had to choose between the Precision anti vibe and the Flexx, what would u pick??
What’s ur fav 450 out of the yfz,trx,kfx or ltr?
I haven't ridden a KFX. I rode an LTR many years ago and I remember I really like it. I'd say the KTM is the best handling quad I've ridden but the DS450 is a ton of fun to ride too. I really like all the 450's. It comes down to how their built
What year is Chad's TRX thanks
2004
When was this? Hopefully next summer i will have my Raptor out to ride with ya.
This was 3 weeks ago
@@PeteHager ah ok. Once i get my Raptor together you'll have to keep me posted wheb you hit Appleton again. Its about a 40min drive from me. Im near Alexandria/Glenwood
What’s the last year they made the TRX
I think 2014
That trx tho 😍💯🤤
Thank you
Brutálisan megy a RAPTOR
Nowhere good to ride here in good ol CT
If don't know what is it but your ATV videos are so unique then other and is your raptor a custom made or did you just but it out of a dealership and didn't add anything cause I love your raptor I had a raptor but I broke down
Thanks for watching my videos😊I bought my Raptor new. I had been out of the sport for about 5 years and wanted a new machine with an extended warranty. I put a few parts on it before I even took it home. It's been a great quad. Sorry to hear your's broke down, I rarely read about people having engine problems so hopefully it's nothing too significant
@@PeteHager no its fine now because i replaced the old chain with a new one and added new tires for trails and it is extremly smoother than before and gas and oil keep coming out when i ride but go it fixed its all good now and i put the same color as your i just love red on the raptor 700 and i got a banshe 350 never lets me down
Eso Legend awesome to hear man! I’m jealous that you have a banshee! I hope I get a chance to ride one this year. Hopefully someday I’ll have one 🤘
I hope u get a banshee to I just got a renegade for my birthday it was today so I bought some gas for the renegade and for my banshee and raptor and changed the oil and battery
I'm going on a trail today so I'm gonna bring my renegade to the farm it's the best for trails and muddy places