How to install DSN-VC288 Volt-Amp Meter? display digital ampere and voltage 0-100V 0-10A

In this video, we show the correct method of using and connecting wires of 0-100V 0-10A Mini Digital Volt-Amp Meter panel DSN-VC288. Using this voltmeter-ammeter, you can measure voltage from 0V to 100V and ampere from 0A to 10A and see it digitally on the blue and red panel.
----------------
In this video, we have used a LED and a 12-volt fan to measure and display the ampere consumption. We also used a 12 volt adapter and a 24 volt adapter to display the voltage.
Connecting the wires of this voltmeter-ammeter module is a bit difficult and must be done carefully, which we tried to show in this video.
----------------
A voltmeter is an instrument used for measuring electrical potential difference between two points in an electric circuit. An ammeter is a measuring device used to measure the electric current in a circuit. Digital Voltmeter Ammeter DC 0-100V 10A.
❤️ If you liked this video, please like this video and follow our channel.
☑️Also support us by sharing the video
📢 Subscribe Channel: / @newtecpro
#DSN-VC288 #Volt_Amp_Meter #Volt_Amp_Meter #Amper_meter
▬ Social Media ▬▬▬▬▬▬▬▬▬
Please subscribe and press bell. Watch our latest videos
Twitter: / newtecpro
Instagram: / newtecpro
Email: [e-mail]
Telegram: t.me/newtecpro

[@poshtiban2664]

The best tutorial I saw about voltmeter and ammeter was this. Thank you, especially the method of connecting the wires is very important

[@newtecpro]

Thank you for your attention. In this video, try to show the method of connecting the wires in the simplest way

[@uthaungnyi1257]

Thanks, I like that.

[@newtecpro]

thank you. Your message gives us positive energy

[@YigalBZ]

Can you tell what connector is used for current measurement on the PCB? I want to use the exact one.

[@newtecpro]

XH Connector 3 pin and VH Connector 2pin

[@_RandomPea]

Ive bought one of these but it doesn't have the metal ring next to the plugs. It looks identical but for that. Is the setup the same ?

[@newtecpro]

Yes, it is the same. The simple method is this training

[@_RandomPea]

Hey ​@@newtecpro I'm connecting to a model railway controller and followed the instructions with the power source being the controller of course. It only shows when I turn the dial up but it's flashing rather than continuous any idea?. I've noticed the multimeter shows max 15.7v despite the controller says 0-12v... And when I flipped from forward to reverse on the controller I had a big crackle and smoke... And now a dead meter 😂...

[@user-gl9bp6sp8q]

Wrong video
Power supply must be less then 30 volts dc
Testing voltage can be upto 100 volts

[@_RandomPea]

@@user-gl9bp6sp8q the controller I'm using is 12v max output

[@igorberezin856]

wiring red with black etc makes everything super confusing worse than Chinese instructions that come with it

[@newtecpro]

Yes that's right. This cheap product is made in China. But one question: Wasn't this video a good guide for you? Did our video help you? If you have any suggestions, please let us know so that we can improve them in the next video.

[@xltaudiotech2033]

i follow this guide but my dsn vc288 , burn-smoke 🎉

[@newtecpro]

Hi dear friend. No form of short circuit or improper connection. Especially the DC power supply. You may have connected the + and - wires incorrectly or they have collided with each other

[@xltaudiotech2033]

@@newtecproit's quite simple wiring connection, I think the vc288 itself has a problem.

[@khazenaeadab9755]

Price?

[@newtecpro]

The price varies, but you can buy it for about $2