DIGITAL DC VOLT AMP METER
Вставка
- Опубліковано 7 лют 2025
- This video is on how to use the Digital DC VOLT AMP Meter.This meter can be used to measure volt as well as current.
Max 100v DC and 10A possible Measurement.
It can be used in single power source mode or dual power source mode. Both connections are explained.
Hi Saravanan, I am a retired person and DIY is my pass time. Your video is very systematic and easy to understand. Congratulations for explaining so nicely.
Thank you Sir for your apprerciation.
Hello my friend.
I am a retired person & I am very much interested in electronic. I watch youtube videos regarding electronic and electrical DIY, and I do purchase it from Amazon but now as Amazon charges for delivery, I stoped buying it from Amazon. Now I purchased from local shop, very cheap and I spent Rs 10.00 for bus to get it.
Now I brought Voltmeter cum Amps meter from local with no gurantee. I watched more than 50 video's on this subject but all in vain. Nobody showing how to check with separate current and Amp. You made my day.👍🏻👍
Look up Tayda electronics . very reasonable prices . I chose postal shipping because it is cheap . Tommy
Sir you are a great teacher, you can simplify any complicated wiring , I am retired newbie and just finished a power supply kit but was confused about connecting this V/A meter until I found your video, please continue with more videos like this. it was well explained, easy to understand and straight to the point.
Thanks. You just saved me the stress of connecting this. I just wanted a meter to measure voltage but ended up getting this without any details on the connection from the website
Great directions Saravanan ! You made the best layout for wiring purposes that I've come across. Thank you !
Thank you so much man.. I have been trying to connect digital volt amp meter to my DIY amplifier, finally your video helped.
Thank you so much❤
I was able to do it by following your tutorial, thanks a lot!
You are explaining is so good sir thank you thank you so much sir
MAASHAALLAH, very well explained,. Keep doing the good work Brother!.
Great video! Very informative and educating. Simple to understand 👌
First time, I mistakenly tried to power the module by connecting the thick wires. I saw smoke coming and immediately disconnected.
Then tried using as per your video, everything works. Do you think my module would be still broke?
Thanks sir.... It is useful to finish my steam turbine....to measure output volt and amps
Thank you for the very helpful information
How long amp can check continuously it's for a few seconds or can BHI fitted permanently???
Hello sir. I am an engineering student. I have watched almost all videos of your. They are interested for me and learnt a lot from your contents.currently i was trying tu upgrade firm ware of atmel atmega16u2 using avrdudes software by another arduino uno as arduinoisp..i
I upgraded the firmware..but arudino board still not working and i found fusebits are set wrongly. They got changed somehow before upgradation. And i am trying to change them but it fails again and again. So sow one video of yours to know how upgrade firmware of that chip. I could not change the fuse bits. Kindly help if it is possible.
thanks so much sir for this accurate guide might help me enhance my DIY laser projects that will be usually crucial to have an accurate amps before the Laser diode or laser driver.☝️👍👍
Brilliant! Best explanation available
I read a warning of the shunt that must be powered up first before measuring or else the module can be damaged. How true is that?
Good explanation! Question? Is it better to use single source or double source? What are the pros and cons? I have a couple old pc atx power supplies and plan to make power sources out of them. In fact I already did. I have 3.3, 5 and 12 volts coming out of it. I want to add a potentiometer to control the Voltage and of course I want to see the voltage as I adjust the potentiometer. My question is do I need 2 power sources or 1? Or does it make no difference?
Thanks!
Well explained . Thanks Saravanan Coimbatore
Excellent.
Most of the videos shows single source measurement only.
Thank you ... great explanation
Very well presented, you made it so easy to understand. Thank you.
Can i use this meter to measure the current and voltage from a solar panel?
I use the meter with the setup for the 2 power sources.
Is this correct?
I have purchase the same meter, it does not have copper shunt current bypass on board, is that safe to measure till 10Amp?
Does the specified circuit for charging a battery work with a solar panel?
Your 12V battery = solar panel (?)
Your "LOAD" = battery that should be charged (?)
Solar panel 26 V / max. 150 W
Thanks for a feedback.
Excellent explanation.
nice explanations thanks for the confusions to get the solution.
Sir, why do we see a drop in voltage as the load is increased? I am using the same power source to measure current as well as voltage.
Excellent video. Well done. So clear.
can it be used in a circuit that shows current and voltage - (minus)
Hi! My meter look just yours but it didn’t come with the copper shunt that you pointed out. Do you think I should send it back or will it still work as well as yours?
question sir. Can i use this set up to the output of the dc motor speed controler?
Well explained thank you sir.
Great Video!
Question, I am using a single power source for my meter but I want to be
able to turn off the meter while leaving the line power on. Do I
interrupt the yellow wire for a switch?
Thanks
Nice sir all functions batate rahiye ga
Can this setup be used to measure volt and amps from a mobile phone adapter???
Bettery buy "charger doctor" comea in usb A format and also cheaper
Thanks you sir, very helpful
best explanation 👍
Dear sir, I have such a volt & current meter with one connector only with thin red, black & yellow wire. Can you let me know how the connections are for the voltage & current measurement please ?
But you could not show us the voltage of the LEDs load !!!
I have some of those meters. They work good.
Very nice information sir🙏🙏🙏
i need to measure the output voltage and amp
of 12 v 1A ac to dc adapter , how can i do that with this device
Nice
Hello ! Can you help me in coding ? I want to control one single relay with sim800l message and also with the rfid ! Pls help me !!!!
hello saravanan i have a variable power supply from 0 to 30v under 3A can i use this volt meter amper meter to show me the value for example when i use 3 or i change to 20v ?
Aoa sir
Ager battery ke ampere measure krnay hoon to connections kiya hoon gay?
hello Saravanan, i need to know how to use the Volt/Ammeter to measure the amp of my 3.7v battery.
Thanks
and in addition, can i connect the Volt/Ammeter wires in series with a battery to measure its amp/volt?
we can measure volt red black yellow wire. But my doubt ...
Can we use this device to direct measure of transformer ampere without any other battery source load?
excellent video sirji
How do I connect it with a solar DC setup? I use a 30ah Lithium battery with solar charge controller.
very nice video sir.....i recd meter with out shunt.....is it available online? thanks
How much Amps it's the display
Excellent. thanks
Good information....
Sir,I have a auto electrical test bench which wiring is perish,it has four types of load with 200a shunt.can you provide the internal wiring diagram of ELAK MK 2 AUTO ELECTRICAL TEST BENCH.
Creative video, thanks for sharing :)
After a longtime I am seeing your presentation on Volt/Ampere meter's application in the you tube. I do remember you and your shop when I was working with Voltas at Coimbatore; I am a frequent visitor to buy components from your shop. Later on when I went to Bangalore I happened to see your online shopping; but I doubt about its progress. Anyway your video of this is very informative. What would be the price If I want to purchase? I need 3 nos and I am now at Ranipet enjoying my hobby. If you can tell me the price and the mode of payment I will send the same and also my address after you receive the payment.
Thank you
I am not getting same reading in general Multimeter (Mastech) and (0-100)V 10A Volt-Ammeter even closer values. Any help ?
At the back of the meter the calibration pots. V_ADJ and I_ADJ use them to calibrate the meter.
Thanks, it helps
Pls do, hack it to higher voltage reading :)
Yes bro we went higher voltage digital meter
Thanks Sir
Thank u.
good job
nice video
How to convert 200v range
Thank you sir
Sir,
How can I connect this v. amps digital meter with a battery charger.
kindly guide me with a circuite.
I did with TP4056 charger and 18650 battery.
If you still have the problem, let me know.
Sir good explains houw can connect inverter battry to see Amp
How to measure current in negative power supply like -5v
Good
Supper sir
Pl give link for purchase
Sar mere pass Ampairmeter hai is ka Ampair Sahi Nahin show ho rahe is per 000 Nahin a Raha matlab 5.7 is Tera show ho raha hai kya folt ho sakta ha sir pls
What is that 16 pin IC?
My meter shows 99.9 amps but voltage reading is fine .. and nothing works on output
I need this one for my e-wheeler..
Metar ka price kya hai
Sir, please ic details and code
Nice 👍🏻👍🏻 🇮🇳 Kuki 17|06|2022
Why are you making videos if you cant reply to people asking for help?
❤ oooooo bhai nails
Polash
Hi i need your help on the Arduino, have sent you a message Please can you help. Thanks
Digital v. Meter in Hindi translation midiya
Hi
eyas iroip
No do sar
👎👎👎
Speech over over over ,
o angrej hindi mein bhi bol le
thank you sir💐🙏
Nice